Operating instructions

110 ICX (International), March/1999 ICX-35-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
•N/A
Considerations
•N/A
Set Walking TRS (Call Barring) Codes
Description
You can assign Walking TRS (Call Barring) Codes for each extension.
6. Press the
HOLD
key. XXX-
Verified ACCD
displays (where XXX
= account code table number)
7. Press the
HOLD
key. 0001 : AAAAAAAAAAA
XXX:Account Code displays (where
AAAAAAAAAAA = current account
code and XXX = account code table
number)
8. Enter up to ten-digit Verified Account Code. (All Verified
Account Codes must be unique. If there is a matching entry
entered, the System will not accept the entry and will double
beep.)
Note:
To clear an entry or existing data, press the
FL/R
key.
9. Press the
HOLD
key. 0002 :X
XXX:TRS Class displays (where X =
TRS Class)
10. Enter the TRS (Call Barring) Class to be associated with
the Verified Account Code entry.
11. Press the
HOLD
key to store the entry. 0001 :YYY displays (where YYY = the
next account code table number)
12. To add additional Verified Account numbers, press the vol-
ume up or down key or press the
HOLD
key to move to the
desired Verified Account table number.
Desired Verified Account table number
displays
13. Repeat steps 8-12 until all Verified Account numbers are
entered.
14. Press the
MEMORY
key to exit the entry mode Table Number
15. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF
LED goes off
Action Result