Operating instructions

Section 700 - Operation Chapter 4. User Maintenance
ICX-35-700 ICX (International), March/1999 109
Hardware Requirements
•N/A
Considerations
•N/A
Set Verified Account Codes
Description
(For a description of Verified Account Codes, see “Verified Account Codes” on page 119.)
You can enter up to 500 Verified Account codes. The System will store them in memory as valid
codes. Once the codes are entered here, a Toll Restriction Service (TRS) (Call Barring) Class of
Service (COS) can be used with each code. You can then enter your code on someone else’s phone to
bypass the TRS (Call Barring) restrictions on that phone. (The TRS (Call Barring) assigned to the
Verified Account code will override the phone’s TRS.)
Operation
To set the Verified Account code:
13. To set additional text Messages, press the volume up or
down key or press the
HOLD
key to move to the desired
Send Text Message.
Desired Text Message displays
14. Repeat steps 9-13 until all Text Message Replies are
entered.
15. Press the
MEMORY
key to exit the entry mode. Enter Msg # displays
16. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF
LED goes off
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the
81
level, enter
04
.
3. Press the
HOLD
key. 8104-
Verified ACCD displays
4. Press the
HOLD
key. Table Number displays
5. Enter the Verified Account table number (
001
-
500
).
Action Result