Operating instructions

108 ICX (International), March/1999 ICX-35-700
Chapter 4. User Maintenance Section 700 - Operation
Set Text Message Replies
Description
This menu item specifies reply text messages.
Operation
To set Text Message Replies using either a large-display or small-display phone:
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the
81
level, enter
11
.
3. Press the
HOLD
key. 8111-
Text Message displays
4. Enter
1
.
5. Press the
HOLD
key. 8111-1 :
Reply Message displays
6. Press the
HOLD
key. Enter Msg # displays
7. Enter the Message number (
0-9
).
8. Press the
HOLD
key. A B C D E F X
displays (where X = Reply Text Message
number)
9. Enter the Text Message (up to 15 characters):
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 92.)
Note:
Press the
FL/R
key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired Text Message.
Note:
Press the
FL/R
key to clear the entire entry.
12. Press the
HOLD
key to store the entry. Next message number displays