Operating instructions

106 ICX (International), March/1999 ICX-35-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
•N/A
Considerations
•N/A
6. Press the
HOLD
key.
Enter SSD #
displays
7. Enter the SSD bin number (
00
-
79
or
000
-
799
).
8. Press the
HOLD
key.
A B C D E F XXX
displays (where
XXX = SSD bin number)
9. Enter the SSD name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 92.)
Note:
Press the
FL/R
key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note:
Press the
FL/R
key to clear the entire entry.
12. Press the
HOLD
key to store the entry. Next SSD bin number displays
13. To set additional SSD names, press the volume up or down
key or press the
HOLD
key to move to the desired SSD.
Desired SSD bin number displays
14. Repeat steps 9-13 until all SSD names are entered.
15. Press the
MEMORY
key to exit the entry mode.
Enter SSD #
displays
16. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF
LED goes off
Action Result