Operating instructions

Section 700 - Operation Chapter 4. User Maintenance
ICX-35-700 ICX (International), March/1999 105
Hardware Requirements
•N/A
Considerations
•N/A
Set System Speed Dial Names
Description
For a description of System Speed Dial (SSD), see “System Speed Dial” on page 185 for a Digital
Key Telephone, “System Speed Dial” on page 245 for a Digital Single Line Telephone (DSLT), and
“System Speed Dial” on page 289 for a Single Line Telephone (SLT).
Operation
To set SSD names using either a large-display or small-display phone:
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note:
Press the
FL/R
key to clear the entire entry.
12. Press the
HOLD
key to store the entry. Next SSD index number displays
13. To set additional SSD index names, press the volume up or
down key or press the
HOLD
key to move to the desired
SSD.
Desired SSD index number displays
14. Repeat steps 9-13 until all SSD indexes are entered.
15. Press the
MEMORY
key to exit the entry mode. Enter SSD # displays
16. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF
LED goes off
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the
81
level, enter
02
.
3. Press the
HOLD
key. 8102-
SSD Assignment displays
4. Enter
1
.
5. Press the
HOLD
key. 1 :
SSD Name displays
Action Result