Operating instructions

Section 700 - Operation Chapter 4. User Maintenance
ICX-35-700 ICX (International), March/1999 103
Considerations
•N/A
Set System Date/Time/Day
Description
The System allows you to change the date, time, and day of week. When setting the time, you can
specify 12 or 24 hour format.
Operation
To change the system date, time, and day of week:
Hardware Requirements
•N/A
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the
81
level, enter
000
.
3. Press the
HOLD
key. 0 :YYMMDD
Date displays
4. Enter the year (two characters), month (two characters), and
day (two characters).
Note:
To clear an entry or existing data, press the
FL/R
key.
5. Press the
HOLD
key. 1 :HHMM
Time displays
6. Enter the hour (two characters) and minute (two characters).
Note:
To clear an entry or existing data, press the
FL/R
key.
7. Press the
HOLD
key. 2 :
Day of the Week displays
8. Enter the day of week where:
1
= Mon,
2
= Tues.,
3
= Wed.,
4
= Thurs.,
5
= Fri.,
6
= Sat.,
0
= Sun.
Note:
To clear an entry or existing data, press the
FL/R
key.
9. Press the
HOLD
key to store the entry.
10. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF
LED goes off