Operating instructions

64 ICX (International) issued June 2000 ICX-45-700
Chapter 3. System Features Section 700 - Operation
For example, an outgoing call is an LRS Outgoing call (
L
) but it is also a transferred call. The Call
Logging data condition code will be
T
to indicate that the call was an Outgoing Transfer. (A
transferred call’s condition code takes precedence over the type of call - LRS Outgoing call [
L
].)
Table 9. Priority of incoming call condition codes
For example, an incoming call is a DDI Incoming call (
D
), but it is also a transferred call. The Call
Logging data condition code will be
t
to indicate that the call was an Incoming Transfer call. (A
transferred call’s condition code takes precedence over the type of call - DDI Incoming call [
D
].)
Figure 1. Output data formatt
Condition Code: (
I
: Incoming call /
D
: DDI incoming call /
h
: Hold incoming call /
N
: Network
incoming call /
S
:DISA incoming call /
t
: Transfer incoming call /
A
: Abandoned Call /
O
: Outgoing
call [Non LCR] /
F
: Call forward outside call /
H
: Hold outgoing call /
L
: LCR outgoing call /
T
:
Transfer outgoing call /
W
: Closed Numbering)
Call Start Time (MM=01 to 12 / DD=01 to 31 / HH=00 to 23 / MM=00 to 59 / SS=00 to 59)
Call Duration Time (HH=00 to 23 / MM=00 to 59 / SS=00 to 59)
Trunk User No. (Extension line No.: 0 to 9999 / trunk No.: C001 to C576)
Trunk No. (Trunk No.: 001 to 576 / When trunk is disconnected while the call is on hold: *001 to
*576)
Priority
Condition
Code
Description
Highest
h
or
t
h = Incoming Hold
t = Incoming Transfer
2nd
D
,
N
, or
S
D = DDI Incoming Call
N = Network Incoming Call
S = DISA Incoming Call
Lowest
I
or
A
I = Incoming Call
A = Abandoned Call
Format #1
T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvvv
H
Format #2
T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvv
dddddddddddddddd cccccccc MM:SS
H
1 2 3 4 5 6 7 8
8
2 3 4 5 6
9
7
10
1
11
1
2
3
4
5