Operating instructions

304 ICX (International) issued June 2000 ICX-45-700
Chapter 7. SLT Features Section 700 - Operation
Operation
To assign PSD numbers:
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default = 710 [UK/
HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the PSD bin number (80-99).
4. Dial the number.
5. Hookflash.
6. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. If necessary, access an outside line. Outside dial tone
3. Enter the Speed Dial Originate code (default = 80).
4. Enter the PSD bin number (80-99).
5. Complete the call and replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default = 710 [UK/
HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the PSD bin number (80-99).
4. Hookflash.
5. Complete the call and replace the handset.