Operating instructions

Section 700 - Operation Chapter 7. SLT Features

ICX-45-700 ICX (International) issued June 2000 303

It is not possible to monitor an extension from an SLT telephone.

Hardware Requirements

•N/A

Related Programming

• FF1-0-03: Extension COS (Allow/deny Busy Override Send—Monitoring extension)

• FF1-2-02: Dial Plan at DT Pattern 1

• FF1-2-03: Dial Plan at DT Pattern 2

Considerations

• Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.

• If the monitored extension is placed on-hook while Room Monitoring is activated, the

monitoring extension will hear a fast busy tone.

• If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored

extension will remain in the monitored mode, and can be accessed by any other extension

allowed to access the room monitoring mode.

• A room cannot be monitored from more than one extension at a time. If an attempt is made to

monitor an extension while the extension is being monitored, the user will hear a fast busy tone.

• ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or

monitored modes.

• A monitoring extension cannot forward a call on hold to a monitored extension.

• A monitored extension cannot receive a transferred call.

Speed Dialling

Description

The System supports the following speed dial features:

• Personal Speed Dial (PSD)

• System Speed Dial (SSD)

• Speed Dial Linking

• Speed Dial Name Assignment

Personal Speed Dial

You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored

in PSD bins numbered