Operating instructions

286 ICX (International) issued June 2000 ICX-45-700
Chapter 7. SLT Features Section 700 - Operation
Related Programming
• FF1 (System): Extension Park Hold Recall Timer
• FF1-0-02: Dial Control for Floating Hold Answer
Considerations
• You cannot park more than one call at a time.
• If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
Call Pickup
Description
The System allows the following types of call pickup:
• Extension Group Pickup
• Extension Direct Pickup
• Trunk Group Pickup
• Trunk Direct Pickup
Extension Group Pickup
Extension Group Pickup allows you to pick up a direct ringing call (within your extension pickup
group or in a different pickup group) without having to dial the number of the ringing extension.
Three types of Extension Group Pickup are available:
•
Call Pickup - All Calls:
You can pick up a call ringing anywhere within your own extension
group.
•
Call Pickup - External Calls:
You can pick up only external calls ringing within your own
extension group.
•
Specified Group Pickup:
You can pick up a call ringing to an extension in another extension
group.
Operation
To use Extension Group Pickup - All Calls:
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Extension Group Pickup - All Calls code (default
= 701 [UK/HK] or 701# [Taiwan, Malaysia, Indonesia]).
3. Complete the call and replace the handset.