Operating instructions

284 ICX (International) issued June 2000 ICX-45-700
Chapter 7. SLT Features Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Hookflash Control on SLTs)
Considerations
• Intercom calls will be held as Exclusive.
Broker’s Hold
Broker’s Hold allows you to toggle between the current call and the last held call by hookflash.
Operation
To place a call on Broker’s Hold:
Hardware Requirements
•N/A
Related Programming
• F1-0-03: Extension COS (Hookflash Control on SLTs - Broker’s Hold or Conference)
• FF3: Extension COS
Considerations
• If Broker’s Hold is enabled, it is not possible to establish a conference call from an SLT position.
Call Park
You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient
of the call.
Trunk, extension, and network calls may be parked.
There are two ways for an extension to park a call on the ICX. One way is to park the call at the
receiving extension and to retrieve the parked call at another extension by dialling the park answer
code plus the parking extension number. The other way is to park the call at another extension and dial
the park transfer answer code at the other extension to retrieve the call.
Action Result
1. Pick up the first call.
2. Hookflash. First call on hold
3. Pick up the second call.
4. Hookflash. Second call on hold, first call retrieved