Operating instructions

256 ICX (International) issued June 2000 ICX-45-700
Chapter 6. DSLT Features Section 700 - Operation
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
•N/A
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters. The following table reflects which keys to
use.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. If necessary, access an outside line. Outside dial tone
3. Press the MEMORY key.
OR...
Enter the Speed Dial Originate code (default = 80).
4. Enter the PSD bin number (80-99).
5. Complete the call and replace the handset or press the ON/
OFF key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default = 710 [UK/
HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the PSD bin number (80-99).
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
To indicate . . . Enter/Press
Digit or character 0, 1 - 9, *, #
Intercom Level * MEMORY * #
MCO Code 9 (UK/HK) or 0 (Tai-
wan, Malaysia, Indonesia)**
MEMORY * 0
MCO Code 81** MEMORY * 71
MCO Code 82** MEMORY * 72
MCO Code 83** MEMORY * 73
MCO Code 84** MEMORY * 74
Pause REDIAL
DP - DTMF Code MEMORY * *