Operating instructions

146 ICX (International) issued June 2000 ICX-45-700
Chapter 5. Key Telephone Features Section 700 - Operation
To outdial from the Call Log:
To store the Call Log number in a personal speed dial:
Action Result
1. Go off-hook or press the ON/OFF key. Intercom dial tone
2. Enter the Call Log feature code (default = CONF 96). Phone enters call log mode.
3. Press the following keys to view the call log:
# - Move forward in call log
* - Move back in call log
4. To return a call, (and exit the Call Log):
Press the left EXEC key to access Access MCO 1 (dial 9
[UK/HK] or 0 [Taiwan, Indonesia, Malaysia]), dial add
digits if required (usually “1” in USA only), and dial the
displayed caller ID number.
OR...
Press the right EXEC key (soft key) to access Access
MCO 1 (dial 9 [UK/HK] or 0 ]Taiwan, Indonesia, Malay-
sia]), and dial the caller ID number.
Action Result
1. Go off-hook or the ON/OFF key. Intercom dial tone
2. Enter the Call Log feature code (default = CONF 96). Phone enters call log mode.
3. Press the following keys to view the call log:
# - Move forward in call log
* - Move back in call log
4. To store the call log number in a personal speed dial:
Press the PROG key, the speed dial bin number (80-99)
and press the left EXEC key (to dial the add digits, usually
an area code) and press the HOLD key.
OR...
Press the PROG key, the speed dial bin number (80-99)
and press the right EXEC key (soft key) and press the
HOLD key.