Operating instructions

138 ICX (International) issued June 2000 ICX-45-700
Chapter 5. Key Telephone Features Section 700 - Operation
To retrieve a transferred call park:
Hardware Requirements
•N/A
Considerations
• You cannot park more than one call at a time.
• Call Park functions can be assigned to FF keys (see “Flexible Function Keys” on page 163).
• No more than one Call Park Answer key may be assigned to a single telephone.
• A Call Park Answer key may not be assigned to the EM/24 or DSS/72 console.
• If a call is parked by Call Park key, the LED flashes.
• LCD softkeys are also available for Call Park.
• Once a call is parked, it cannot be accessed by the trunk key or direct trunk access (similar to
exclusive hold).
• If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
• Depending on the Station/Floating Park Hold Pickup setting (FF1-0-02-0025), the call pickup
access code can set to
*9
(default),
773 (UK/HK), or 773# (Taiwan, Malaysia, Indonesia)
. The
“
*9
” access code operates as follows:
3. Dial the extension number to receive the parked call.
Park (ext#)
displays on lower display
4. If necessary, page the party that needs to retrieve the call.
Action Result
1. At the extension with the transferred park call, lift the hand-
set or press the ON/OFF key.
Intercom dial tone
2. Enter Call Park Answer/Self access code (default = 772
[UK/HK] or 772# [Taiwan, Malaysia, Indonesia]).
•
CO TALK TRK #XX
displays (where
XX = line number)
• Connected to parked call
System Size Virtual Line Number and Operation
96
01-09: Floating Hold pick up
10-96: For Station Park Hold pick up purpose
Above 96
001-099: Floating Hold pick up
100-576: For Station Park Hold pick up purpose
Action Result