Operating instructions

Section 700 - Operation Chapter 5. Key Telephone Features
ICX-45-700 ICX (International) issued June 2000 137
Call Park
You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient
of the call.
Trunk, Extension, and Network calls may be parked.
There are two ways for an extension to park a call on the ICX or ICXHD. One way is to park the call
at the receiving extension and to retrieve the parked call at another extension by dialling the park
answer code plus the parking extension number. The other way is to park the call at another extension
and dial the park transfer answer code at the other extension to retrieve the call.
Operation
To park a call on this extension:
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
Action Result
1. While on a call, press the HOLD key. • Current call on hold
•
CO HOLD #XX
displays (where XX =
trunk number)
2. Enter the Call Park Hold access code (default = 771 [UK/
HK] or 771# [Taiwan, Malaysia, Indonesia]) or press the
PARK HOLD key.
Accepted ST-Park
displays
3. If necessary, page the party that needs to retrieve the call.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
Enter the Call Park Answer/Other Ext. access code (default
= 773 [UK/HK] or 733# [Taiwan, Malaysia, Indonesia]).
OR...
Enter the Call Park/Floating Hold Answer feature access
code (default = *9). (Version 3.0 and higher)
Enter Park EXT
# displays
2. Dial the number of the extension that parked the call. •
CO TALK TRK #XX
displays (where
XX = line number)
• Connected to parked call
Action Result
1. Press the HOLD key. • Current call on hold
•
CO HOLD #XX
displays (where XX =
trunk number)
2. Enter the Call Park Transfer access code (default = 774
[UK/HK] or 774# [Taiwan, Malaysia, Indonesia]).
Enter TRNS EXT #
displays