Operating instructions

124 ICX (International) issued June 2000 ICX-45-700
Chapter 5. Key Telephone Features Section 700 - Operation
Hardware Requirements
• An Call Logging printer or external call accounting system is required to collect account code
records.
Considerations
• Account codes are not available during conversation recording mode for the Built-In Voice Mail.
• Account codes will be cancelled after using trunk queuing.
• Account Codes interact with TRS (Call Barring) as shown in the following table:
Attendant Group Calls
CPC-96, CPC-288, and CPC-576 All Versions
Description
You can call the attendant group from any extension by dialling the designated attendant number.
Operation
To call an attendant group:
5. Press a vacant trunk key or enter a Trunk Access Code
(default = 9 [UK/HK] or 0 [Taiwan, Malaysia, Indonesia]).
CO Trunk Key LED lights
6. Dial the phone number. Dialled phone number displays
Forced or Not Forced
Verified or
Non-Verified
TRS (Call Barring) Class
No Account Entry Account Entry
Not Forced Non-Verified Extension Port Based TRS
Class
Extension Port Based TRS
Class
Verified Account Code Based TRS
Class
Forced Non-Verified TRS (Call Barring) Class
for Forced Account Code
(FF1 0 19 0001)
Extension Port Based TRS
Class
Verified Account Code Based TRS
Class
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the attendant pilot number (default = 0 [UK/HK] or 9
[Taiwan, Malaysia, Indonesia]).
Call Attendant
displays
Action Result