HX-A100_VQT4X97.book 1 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Operating Instructions Wearable Camera Model No. HX-A100 Please read these instructions carefully before using this product, and save this manual for future use.
HX-A100_VQT4X97.book 2 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Contents Preparation (Important) About the Waterproof/ Dustproof........................................................ 3 Read this first ................................................. 6 What you can do with this unit ..................... 7 Names and Functions of Main Parts ............ 8 Wearing this unit............................................ 9 Power supply................................................ 11 Charging the battery ..............
HX-A100_VQT4X97.book 3 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Preparation (Important) About the Waterproof/ Dustproof Waterproof/Dustproof Performance This unit’s waterproof/dustproof rating complies with the “IP58” rating. Provided the care and maintenance guidelines described in this document are strictly followed, this unit can operate underwater, to a depth not exceeding 1.5 m for a time not exceeding 30 minutes. * This does not guarantee no destruction, no malfunction, or waterproofing in all conditions.
HX-A100_VQT4X97.book 4 ページ ２０１３年２月１４日 木曜日 午後２時１６分 ∫ When inner side of the lens is fogged (condensation) Condensation may form and the inner side of the lens may steam up if this unit undergoes a significant change in temperature or humidity, such as when this unit is moved from a cold place like a high-altitude location to a warm place. It is not a malfunction or failure of this unit. It may be caused by the environment in which this unit is used.
HX-A100_VQT4X97.book 5 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Using this unit underwater ≥ Use this unit underwater at a depth of down to 1.5 m with the water temperature between 0 oC and 35 oC. ≥ Do not use this unit at a depth of over 1.5 m. ≥ Do not use it in hot water over 35 oC (in a bath or hot spring). ≥ Do not use this unit underwater not longer than 30 minutes continuously. ≥ Do not open or close the side cover. ≥ Do not apply shock to this unit underwater.
HX-A100_VQT4X97.book 6 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Read this first ∫ About recording formats and compatibility of this unit ≥ This unit is an MP4 format (MPEG-4 AVC file standard) Wearable Camera for recording highdefinition motion pictures. ≥ AVCHD and MPEG2 motion pictures are different formats, and are not therefore supported by this unit. ∫ About the portrait rights Be sure to pay special attention to the privacy, the portrait rights, etc. of the subject when you use this unit.
HX-A100_VQT4X97.book 7 ページ ２０１３年２月１４日 木曜日 午後２時１６分 What you can do with this unit You can enjoy a variety of functions by connecting this unit to a smartphone or an access point. DLNA-compatible devices Playback on DLNA-compatible devices You can play back the contents stored in this unit on the DLNA-compatible devices. (l 43) Live broadcasting *1 Using the “LUMIX CLUB” and USTREAM services, you can broadcast live motion pictures.
HX-A100_VQT4X97.book 8 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Names and Functions of Main Parts Main unit 13 1 5 2 6 3 7 8 4 14 15 Camera 9 unit 16 17 18 10 12 11 1 2 3 Power lamp (l 12, 15) Access lamp (l 14) Wi-Fi®/WPS button [ ] (l 17, 35, 40, 41, 53) Wi-Fi mode lamp (l 17, 35, 40, 41, 53) Switches to Wi-Fi mode. Each press of the button switches the lamp.
HX-A100_VQT4X97.book 9 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Wearing this unit Wear the main unit and camera unit. ≥ If you have felt discomfort after a long period of use, stop the use or loosen the tight fit by slightly loosening the adjuster, etc. ≥ For the direction of the camera, check the actual image on the Live view screen. (l 23) Camera unit Main unit Fastening the main unit using the Armband Case 1 Insert so that you can see the buttons on the main unit.
HX-A100_VQT4X97.book 10 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Attaching the camera unit to the earhook to wear 1 2 Insert the camera unit until it clicks into place. UP Loosen the camera/main unit connection cable B to the shape of an ear, and fit it in the holder C. L ≥ Insert so that the projecting part A of the camera will face up. 3 UP 4 Hook the earpieces D to ears so that the camera unit will be positioned on the left, and adjust the size.
HX-A100_VQT4X97.book 11 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Power supply Charging the battery When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time. ≥ This unit has a built-in rechargeable lithium-ion battery. Do not remove except when disposing of this unit. (l 61) ≥ The battery will not be charged if this unit is turned on. Connect it with the PC to charge the battery after turning it off.
HX-A100_VQT4X97.
HX-A100_VQT4X97.book 13 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Recording to a card This unit can record motion pictures or still pictures to a microSD card. Cards that you can use with this unit Use microSD Memory Card (512 MB/1 GB/2 GB) or microSDHC Memory Card (4 GB/8 GB/ 16 GB/32 GB) conforming to Class 4*2 or higher of the SD Speed Class Rating*1 for motion picture recording. ≥ Operation of microSD cards other than described above is not guaranteed.
HX-A100_VQT4X97.book 14 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Inserting/removing a microSD card Caution: Check that the access lamp A has gone off. ≥ When this unit is accessing the microSD card (such as recognition, recording, playback and deletion), the access lamp lights up. A C B D C: Unlocked when the red indicator is visible 1 Slide the LOCK switch B to the left to unlock the side cover and slide the side cover downward to open it and then insert (remove) the microSD card into (from) the card slot.
HX-A100_VQT4X97.book 15 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Turning this unit on/off Press the power button to turn on this unit. To turn off this unit The power lamp is turned on. Hold down the power button until the power lamp goes off. Proceed to “Connecting directly with a smartphone” (l 17) and “Setting up with Setup wizard” (l 19) to finish the setup of this unit. You can enjoy the functions of this unit after finishing the setup.
HX-A100_VQT4X97.book 16 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Wi-Fi® function ∫ Use this unit as a wireless LAN device When using equipment or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using the camera for any purpose other than as a wireless LAN device.
HX-A100_VQT4X97.book 17 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Connecting directly with a smartphone Installing Image App The Image App is an application for the smartphone provided by Panasonic. Required Operating Systems for Image App The following Operating Systems of the smartphone are supported. AndroidTM device: iOS device: Android 2.2 to Android 4.2 iOS 4.3 to iOS 6.0 ≥ The service may not be able to be used properly depending on the type of smartphone being used.
HX-A100_VQT4X97.book 18 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Selecting SSID of this unit to connect with a smartphone Select this unit's SSID (Wireless network name) on a smartphone and enter password to connect with the smartphone. ≥ Change the default SSID and password after completing the first setting. (l 19) 1 Press the Wi-Fi/WPS button continuously to change the Wi-Fi mode lamp to [ ]. ≥ The Wi-Fi mode lamp [ 2 ] flashes. Set the Wi-Fi function to ON on the smartphone setup menu.
HX-A100_VQT4X97.book 19 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Setting up with Setup wizard After making the settings according to the setup wizard screens, you can use the main functions of this unit. Proceed to complete the setup by following the on-screen instructions. ≥ The setup wizard is displayed at the time of purchase and after a long period of non-use during which the battery ran down. 1 Synchronise the time of this unit with that of smartphone.
HX-A100_VQT4X97.book 20 ページ ２０１３年２月１４日 木曜日 午後２時１６分 ∫ If the connection between this unit and the smartphone has been interrupted The connection between this unit and the smartphone may be interrupted temporarily depending on radio wave conditions. An attempt to reconnect is made automatically when radio wave interference, etc. is eliminated. Please note the following.
HX-A100_VQT4X97.book 21 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Using the Setup Menu For settings on the Setup menu, tap Image App screen. # [Camera setup] # respective items on the Alert Sound Starting and stopping of recording, unit on/off and occurring errors can be confirmed with this sound. (High/Low/OFF) (l 57) Economy When about 5 minutes have passed without any operation, this unit automatically turns off to save the battery life.
HX-A100_VQT4X97.book 22 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Basic Recording Record motion pictures or still pictures using the smartphone as a remote control. ≥ For details, refer to the help of the Image App. Preparation: Connect this unit with the smartphone and start Image App. (l 17) 1080/25p Angle of view Select Standard or Wide mode. Live view Displays an image from the camera of this unit. ≥ Also outputs sound from the microphone of this unit.
HX-A100_VQT4X97.book 23 ページ ２０１３年２月１４日 木曜日 午後２時１６分 ∫ Checks before recording If you intend to record only with this unit by turning off the Wi-Fi mode, we recommend you make a test recording to check the settings such as the field of view mode, [Image stabilization] and [White balance] before recording. (l 22, 25, 26) ≥ Wear this unit, face the front, and then check them on the Live view screen (l 22). ≥ You can use [Shooting guidelines] (l 26) as a guide for balance in composition.
HX-A100_VQT4X97.book 24 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Using the Recording menu Tap # [Record Setup] # respective items on the Image App screen. ≥ For more information, refer to the help of the Image App. Normal shooting mode This sets the recording mode. The greater the number is, the higher the image quality is. However, the file size also becomes greater. (l 60) Set to ON to select Normal shooting mode in [Rec Mode].
HX-A100_VQT4X97.book 25 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Interval rec mode This is for recording still pictures at a set interval. (60 Seconds/30 Seconds/10 Seconds/5 Seconds/ 3 Seconds/OFF) ≥ If you tap the still picture recording icon, intermittent recording starts. (Tap it again to stop recording.) ≥ You can also start/stop intermittent recording by pressing the photoshot button on this unit. ≥ The access lamp of this unit flashes.
HX-A100_VQT4X97.book 26 ページ ２０１３年２月１４日 木曜日 午後２時１６分 White balance When the colour tone does not look natural due to a light source, etc., tap [Preset], and select the mode. ≥ When recording under mercury vapor lamps, sodium lamps, spotlights in a theater, etc. or when recording a sunset/sunrise, etc., fill the entire screen with the white subject, and tap [Custom] # [Set] to set. (The set value is stored in [User].
HX-A100_VQT4X97.book 27 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Playback Motion pictures or still pictures stored in this unit are played back with the smartphone. ≥ For more information, refer to the help of the Image App. Preparation: 1 Tap Connect this unit with the smartphone and start Image App. (l 17) . ≥ Thumbnails of motion picture or still picture stored in this unit are displayed. 2 Tap ( ). ∫ For playing back motion pictures 3 4 Tap MP4.
HX-A100_VQT4X97.book 28 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Using the Playback menu Playback settings Tap # [Playback settings] # respective items on the Image App screen. ≥ For more information, refer to the help of the Image App. ≥ Please refer to page 32 for "Picture Share" settings. Size:Copy from camera If “Medium” is set, the data will be resized to 2.1M when copying still picture data in this unit to the smartphone.
HX-A100_VQT4X97.book 29 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Camera function Tap # # items in [Camera function] on the Image App screen. ≥ For more information, refer to the help of the Image App. ≥ For “Play on TV”, refer to “Playing back on a DLNA-compatible TV” (l 43). SCENE PROTECT Motion/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some motion/still pictures, formatting the microSD card will delete them.
HX-A100_VQT4X97.book 30 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Required settings for sending data, etc. When you upload motion pictures and still pictures recorded with this unit on WEB services (Facebook, YouTube, etc.) or perform a live broadcast using “USTREAM”, you are required to set the following. ≥ For more information, refer to the help of the Image App.
HX-A100_VQT4X97.book 31 ページ ２０１３年２月１４日 木曜日 午後２時１６分 “LUMIX CLUB” settings If you intend to broadcast a live motion picture or use WEB services with an iOS device, you are required to register “LUMIX CLUB” and WEB services you use because uploading or live broadcasting is done via “LUMIX CLUB”. Registering “LUMIX CLUB” Perform service user registration (free of charge) for the “LUMIX CLUB”, acquire a login ID, and set the registered content on this unit.
HX-A100_VQT4X97.book 32 ページ 4 ２０１３年２月１４日 木曜日 午後２時１６分 Close (or hide) the Image App, turn on the Wi-Fi setting, and connect this unit and smartphone (l 17) Live broadcast settings (synchronising with this unit) When you perform a live broadcast with USTREAM, you are required to synchronise the “LUMIX CLUB” settings with this unit. Tap # [Playback settings] # [LUMIX CLUB settings] # [Manage login ID] and tap [Register the same LUMIX CLUB login ID as the camera].
HX-A100_VQT4X97.book 33 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Data uploading Uploads motion/still pictures stored on this unit to WEB services. “LUMIX CLUB” settings, etc. are required for uploading. (l 31) Refer to “Required settings for sending data, etc.” (l 30). ≥ For more information, refer to the help of the Image App. Preparation: Connect this unit with the smartphone and start Image App. (l 17) When using the Android device 1 Tap .
HX-A100_VQT4X97.book 34 ページ ２０１３年２月１４日 木曜日 午後２時１６分 ≥ If 3G or other mobile connections are used for uploading motion pictures or still pictures, high data charges may be incurred depending on the content of your data plan. Uploading on WEB services can also be done with an access point connection.
HX-A100_VQT4X97.book 35 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Advanced Setting the connection destination for Live broadcasting (Connecting in Live broadcast mode) This is the connection method for Live broadcasting using the “LUMIX CLUB” and “USTREAM” services. ≥ Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or IEEE802.11n. ≥ Access point settings are required specially for Live broadcasting. LUMIX CLUB USTREAM * * Only the smartphone compatible with tethering is available.
HX-A100_VQT4X97.book 36 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Entering SSID to connect to an access point Enter SSID (Wireless network name) and password of your access point to connect this unit to the access point. Preparation: 1 Connect this unit with the smartphone. (l 17) Check the SSID and password of your access point. ≥ The SSID and password of the access point (e.g. a wireless router) you use are described on the access point device or in its manual. For details, refer to the access point manual.
HX-A100_VQT4X97.book 37 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Live broadcasting Using the “LUMIX CLUB” and “USTREAM” services, you can broadcast live motion pictures. (Live broadcasting) ≥ For the connection, refer to “Setting the connection destination for Live broadcasting (Connecting in Live broadcast mode)” (l 35). * Via “LUMIX CLUB” USTREAM * Only the smartphone compatible with tethering is available. Setting for Live broadcasting Make the settings for performing a live broadcast on this unit.
HX-A100_VQT4X97.book 38 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Settings on this unit Set the Image Quality, etc. for when in Live broadcast mode. (Direct connection to the smartphone is required for the settings. (l 17)) From the Image App, tap the settings. # [Camera Wi-Fi settings] # [Live mode settings], and make Items Contents Set connect. dest. Up to three SSIDs can be registered for live broadcasting. Each of them will make a connection attempt in turns when performing a live broadcast.
HX-A100_VQT4X97.book 39 ページ ２０１３年２月１４日 木曜日 午後２時１６分 ∫ About Image Quality for Live broadcasting Set the Image Quality from the following. When [AUTO] is set, the Image Quality is checked and is automatically set to one of the options. When broadcasting motion pictures or sound are interrupted or the line is disconnected, set the Image Quality according to your communication environment. Image Quality Recommended optimal speed (upstream)*1 Resolution Frame rate*2 High pic.
HX-A100_VQT4X97.book 40 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Performing a live broadcast Press the Wi-Fi/WPS button continuously to change the Wi-Fi mode lamp to [ ]. ≥ The Wi-Fi mode lamp [ ] flashes and an alert sound is emitted while a live broadcast connection is being processed. ≥ Wi-Fi mode lamp [ ] will turn on when the connection is completed. ≥ A live broadcast starts. ≥ If [E-mail Setup] is enabled, a broadcast notification e-mail is sent to the addresses that have been set.
HX-A100_VQT4X97.book 41 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Connecting to devices on the network (Connecting in Access Point mode) The following connections are for controlling this unit from a smartphone via an access point (wireless router, etc.) or for playing back motion pictures in this unit on a DLNA-compatible TV. (The connections of both 1 and 2 are required) ≥ Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or IEEE802.11n.
HX-A100_VQT4X97.book 42 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Entering SSID to connect to an access point Enter SSID (Wireless network name) and password of your access point to connect this unit to the access point. Preparation: 1 Connect this unit with the smartphone. (l 17) Check the SSID and password of your access point. ≥ The SSID and password of the access point (e.g. a wireless broadband router) you use are described on the access point device or in its manual.
HX-A100_VQT4X97.book 43 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Playing back on a DLNA-compatible TV Play back the data in this unit on a DLNA-compatible device, such as a DLNA-compatible TV. ≥ Refer to “Connecting to devices on the network (Connecting in Access Point mode)” (l 41) for information on the connection. (To control this unit from a smartphone, you need to connect both the DLNA device and the smartphone to the same network.) ≥ For compatible devices, see the following support site.
HX-A100_VQT4X97.book 44 ページ ２０１３年２月１４日 木曜日 午後２時１６分 About network information of this unit For the network for this unit, tap # [Camera Wi-Fi settings] # [Camera SSID settings] from the Image App to make changes, etc. The following settings can be made. j Changing the SSID/Changing the network password j Displaying the MAC address information (MAC address refers to a unique ID number assigned to devices that are capable of connecting to the network. MAC address is used for identifying those devices.
HX-A100_VQT4X97.book 45 ページ ２０１３年２月１４日 木曜日 午後２時１６分 With a PC What you can do with a PC If you connect this unit to a PC while this unit is turned off, charging of this unit starts. (l 11) If you connect this unit to a PC while this unit is turned on, this unit is recognised as a card reader, so you can access the microSD card in this unit from the PC. ≥ If the battery has worn out with this unit, recharge sufficiently and turn on this unit. ≥ You can use HD Writer WE 1.0 when using with Windows.
HX-A100_VQT4X97.book 46 ページ ２０１３年２月１４日 木曜日 午後２時１６分 ∫ For use with Mac OS Mac OS X 10.8.2 CPU Intel Core 2 Duo or better RAM 2 GB or more Interface USB port Other requirements Mouse or equivalent pointing device Copying motion/still pictures on PC Using with Windows When using this unit as a card reader, removable disk (Example: in [Computer]. ) is displayed We recommend using HD Writer WE 1.0 (l 48) to copy motion picture files.
HX-A100_VQT4X97.book 47 ページ ２０１３年２月１４日 木曜日 午後２時１６分 About the PC display The folder structure of a microSD card on which this unit has performed recording is as follows. Example folder structure of a microSD card: ≥ Folder numbers range from 100 to 999. CAM_SD Four or five alphabetic characters after a three-digit number indicate the file type. DCIM ≥ A new folder is created each time the date changes.
HX-A100_VQT4X97.book 48 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Using the HD Writer WE 1.0 (Windows only) The feature of HD Writer WE 1.0 You can copy the motion/still picture files to the HDD of PCs or microSD cards using HD Writer WE 1.0, the software installed in the supplied CD-ROM. What can be done with the HD Writer WE 1.
HX-A100_VQT4X97.book 49 ページ ２０１３年２月１４日 木曜日 午後２時１６分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
HX-A100_VQT4X97.book 50 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Operating environment for HD Writer WE 1.0 When using HD Writer WE 1.0, the following PC environment is required. ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible Blu-ray disc/DVD writer drive and media are necessary for writing to a Blu-ray disc/DVD.
HX-A100_VQT4X97.book 51 ページ ２０１３年２月１４日 木曜日 午後２時１６分 ≥ Operation is not guaranteed in the following cases. j When 2 or more USB devices are connected to a PC, or when devices are connected through USB hubs or by using extension cables. j Operation on an upgraded OS. j Operation on an OS other than the one pre-installed. ≥ This software is not compatible with Microsoft Windows 3.1, Windows 95, Windows 98, Windows 98SE, Windows Me, Windows NT and Windows 2000.
HX-A100_VQT4X97.book 52 ページ ２０１３年２月１４日 木曜日 午後２時１６分 ∫ Uninstalling HD Writer WE 1.0 Follow the steps below to uninstall any software applications that you no longer require. 1 2 Select [Start] # [Control Panel] # [Uninstall a program]. Select [HD Writer WE 1.0], then click [Uninstall]. ≥ Proceed with the uninstallation by following the on-screen instructions. ≥ After uninstalling the software, be sure to reboot the PC. Starting HD Writer WE 1.
HX-A100_VQT4X97.book 53 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Others Initialising this unit Initialising the network settings This returns the following network-related settings to the default states. ≥ An SSID/password for this unit set after the purchase ([Camera Wi-Fi settings] # [Camera SSID settings] in the Image App) ≥ An SSID/password for the access point you use in Live broadcast mode ([Camera Wi-Fi settings] # [Live mode settings] # [Set connect. dest.
HX-A100_VQT4X97.book 54 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Troubleshooting Problem Check points The lens fogs up. ≥ This is due to condensation. It is not a malfunction. Please refer to page 4. This unit cannot be turned on. ≥ Charge the battery again to ensure it is sufficiently charged. (l 11) ≥ In cold places, the battery using time becomes shorter. ≥ If the operating time is very short even after the battery has been recharged sufficiently, the battery has worn out. Consult with your dealer.
HX-A100_VQT4X97.book 55 ページ ２０１３年２月１４日 Problem 木曜日 午後２時１６分 Check points Mosaic-like noise appears and movement is jagged when viewing the live view screen on a smartphone. ≥ If the Recording Mode is set to [1920k1080/50p] or a motion picture recorded in [1920k1080/50p] is played back, mosaic-like noise may appear on the screen, and movement may not seem smooth. (The images to be recorded are not affected.) A motion picture file is created that is longer than the recording time.
HX-A100_VQT4X97.book 56 ページ ２０１３年２月１４日 Problem 木曜日 午後２時１６分 Check points Access point is not displayed. ≥ Turn on the access point. ≥ Perform the connection closer to the access point. ≥ This unit may not display or connect to a access point depending on the radio wave condition. ≥ It may not display even if the radio waves exist depending on the setting of the access point. Check the settings of the access point. It takes long time every time to connect to a smartphone.
HX-A100_VQT4X97.book 57 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Alert Sound If this unit is not operating correctly, take note of the alert sound to resolve any problems. “2 Beeps” sound 4 times ≥ If the power is ON, the time of this unit has not been set. Set the date and time. (l 20) ≥ If the power lamp flashes quickly and the power turns OFF, the following symptoms are possible. j The remaining battery level is low. (Charge the battery.) (l 11) j This unit has become hot.
HX-A100_VQT4X97.book 58 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Cautions for use About this unit This unit and the microSD card become warm during use. This is not a malfunction. Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
HX-A100_VQT4X97.book 59 ページ ２０１３年２月１４日 About personal information Delete personal information from this unit when requesting repairs or handing it to others/ disposing of this unit in order to protect personal information. Wireless router and LUMIX CLUB ID/passwords are stored in this unit, so make a copy of this information and reset the network settings to prevent unauthorised use of the information. (l 53) Also remember to remove the microSD card from this unit.
HX-A100_VQT4X97.book 60 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Recordable time/Number of recordable pictures microSD cards are only mentioned with their main memory size. Recording modes/approximate recordable time ≥ The stated times are the approximate recordable times for continuous recording. ≥ The default setting is [1920k1080/25p] Mode. ≥ The recordable time may be reduced if recording with a lot of action is recorded or recording of short scene is repeated.
HX-A100_VQT4X97.book 61 ページ ２０１３年２月１４日 木曜日 午後２時１６分 Requests when disposing of this unit When disposing of your used products, remove the battery built into this unit after initialising the network settings (l 53), and please cooperate in recycling of the battery. Please refer to page 62 about how to remove the battery. ≥ Please make sure that the battery is disposed of at an officially assigned location, if there is one in your country.
HX-A100_VQT4X97.book 62 ページ ２０１３年２月１４日 4 How to remove the battery When disposing of your used products, delete personal information from this unit by initialising the network settings. 木曜日 午後２時１６分 Remove the 4 screws indicated in the figure below, and remove the heatsink E. This figure describes the disposal of this unit, it is not instruction for repair. If disassembled, repair is not possible. ≥ Disassemble after the battery runs out.
HX-A100_VQT4X97.book 63 ページ ２０１３年２月１４日 木曜日 午後２時１６分 About copyright ∫ Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. ∫ Licenses ≥ microSDHC Logo is a trademark of SD-3C, LLC.
HX-A100_VQT4X97.book 64 ページ ２０１３年２月１４日 This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or (5) open source software other than the software licensed under the GPL V2.
HX-A100_VQT4X97.book 66 ページ ２０１３年２月１４日 Panasonic Corporation Web site: http://panasonic.
