Operating Instructions

28 VQT3P01
Caution:
Check that the status indicator has gone off.
1 Open the SD card door and insert (remove) the SD
card into (from) the card slot B.
≥ Face the label side C in the direction shown in the illustration and
press it straight in as far as it will go.
≥ Press the centre of the SD card and then pull it straight out.
≥
Open the SD card door after releasing the lock with the LOCK
lever for the SD card door.
2 Securely close the SD card door.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other
equipment, for the first time on this unit, format the SD card. (
l 58) When the
SD card is formatted, all of the recorded data is deleted. Once the data is
deleted, it cannot be restored.



HM-TA2
Status indicator A
≥ When this unit is accessing
the SD card, the status
indicator lights up.
≥ Insert SD card as shown in the figure.
HM-TA20
HMTA20&TA2EB&EP&GC&GN-VQT3P01_mst.book 28 ページ ２０１１年４月２２日 金曜日 午後１時２５分