Datasheet

Lightweight body that can be
used on moving machinery
IP67 dust- and water-proof protective
enclosure
Compact size despite the built-in
controller and digital readout
The sensor’s lightweight plastic body, which weighs 70 g
approx., can be installed on moving parts such as sliders
and robot arms. The sensor ships standard with fl exible
cables.
Thanks to its IP67-rated protective
enclosure, the HL-G1 can be used
in the presence of water and dust.
Mounting holes are lined with metal
sleeves, allowing the instrument to
be tightened securely in place with
up to 0.8 N•m of torque.
Height: 60 mm 2.362 in
Width: 20.4 mm 0.803 in
Flexible cable
Depth: 57 mm 2.244 in
Support for both NPN and PNP polarity Memory switching function
Fewer model numbers to register Smooth setup changes
A single model number accommodates both NPN and PNP
wiring polarity, reducing the number of model numbers
that must be registered for maintenance purposes.
Up to four groups of sensor settings can be stored for fast
recall. Easy switching among setting groups allows smooth
setup changes.
C
ompact
compact, self-contained body for exceptional ease of use.
4