Datasheet

13
Dual Display Digital Pressure Sensor DP-100L SERIES
DP-100L
SERIES
DP-100L
Panel mounting bracket MS-DP1-4
DP2-20
–101.3kPa
OUT2
OUT1
MODE
0-ADJ
DP2 / DP3
Insert
Remove
Remove
Mounting holes for
DP2 / DP3 series
can be used as is.
Front protection cover
DPX-04 (optional)
can be installed on
MS-DP1-4.
Front protection cover
MS-DP1-3
Panel mounting bracket
MS-DP1-2
Designation Model No. Description
Connector
attached cable
CN-14A-C1
Length: 1 m 3.281 ft
Discrete wires
0.2 mm
2
4-core cabtyre cable with
connector on one end
Cable outer diameter: ø3.7 mm
ø0.146 in
CN-14A-C2 (Note)
Length: 2 m 6.562 ft
CN-14A-C3
Length: 3 m 9.843 ft
CN-14A-C5
Length: 5 m 16.404 ft
Connector
attached cable
Bending-
resistant cable
CN-14A-R-C1
Length: 1 m 3.281 ft
Discrete wires
0.2 mm
2
4-core bending-resistant
cabtyre cable with connector on one
end
Cable outer diameter: ø3.7 mm
ø0.146 in
CN-14A-R-C2
Length: 2 m 6.562 ft
CN-14A-R-C3
Length: 3 m 9.843 ft
CN-14A-R-C5
Length: 5 m 16.404 ft
Connector
CN-14A
Set of 10 housings and 40 contacts
Sensor
mounting
bracket
MS-DP1-1
Allows sensors to be installed on the ooring or ceiling.
Multiple sensors can also be mounted closely.
MS-DP1-5
Allows sensors to be installed on the wall. Multiple sensors
can also be mounted closely.
Panel mounting
bracket
MS-DP1-2
Allows installation to panels with thickness of 1 to 6 mm
0.039 to 0.236 in. Multiple sensors can also be mounted
closely.
MS-DP1-4
Allows replacement from DP2 / DP3 series to DP-100L
series. For newly designed set-up, please use panel
mounting bracket MS-DP1-2 for panel mounting.
Front protection
cover
MS-DP1-3
Protects the adjustment surfaces of sensors.
(Can be attached when using the panel mounting bracket
MS-DP1-2)
DPX-04
Protects the adjustment surfaces of sensors.
(Can be attached when using the panel mounting bracket
MS-DP1-4)
Conversion
bushing
MS-DP1-7
By equipping with the sensor, pressure port can be converted
to Rc
1
/
8
female thread. Replacement from DP2 / DP3 series
is possible.
Flat attachment
MS-DP1-FM
M5 female thread
Pressure port and cable can now be
pulled out in downward, left or right
directions. Flat mounting on surfaces
such as the wall is made possible.
MS-DP1-FR
Rc
1
/
8
female thread
MS-DP1-FN
NPT
1
/
8
female thread
MS-DP1-FE
G
1
/
8
female thread
Note: The connector attached cable CN-14A-C2 is supplied with DP-10□ZL3-M-P.
Recommended connector*
Manufactured by J.S.T. Mfg. Co.,Ltd.
Contact: SPHD-001T-P0.5
Housing: PAP-04V-S
Recommended crimping tool*
Manufactured by J.S.T. Mfg. Co.,Ltd.
Model No.: YC-610R
Recommended connector (e-CON)*
Manufactured by 3M Japan Limited
Applicable connector: 37104-3122-000 FL
Sensor mounting bracket
• MS-DP1-1
OPTIONS
• MS-DP1-2
• MS-DP1-3
Panel mounting bracket, Front protection cover
• MS-DP1-4
• MS-DP1-FM
Flat attachment
• MS-DP1-FR
• MS-DP1-FN
• MS-DP1-FE
Net weight: MS-DP1-FM 15g approx.
MS-DP1-FR/FN/FE 25g approx.
Two M3 (length 8 mm 0.315 in) screws, two
M4 (length 20 mm 0.787 in) screws are
attached.
Connector attached cable
• CN-14A-C□
• CN-14A-R-C□
• MS-DP1-5
Sensor mounting
bracket
MS-DP1-5
M3 (length 6 mm
0.236 in) screws
with washers
Accessory for
MS-DP1-5
( )
Conversion bushing
• MS-DP1-7
Conversion bushing
MS-DP1-7
M5 female
thread
Rc
1
/8 female
thread
Sensor mounting
bracket
MS-DP1-1
M3 (length 6 mm
0.236 in) screws
with washers
Accessory for
MS-DP1-1
( )
Manufactured by OMRON Corporation
Extension cable with connectors
on both ends XS5W series
* Contact the manufacturer for details of the
recommended products.
Recommended extension cables for
M12 connector type*
Smartclick is a registered trademark of
OMRON Corporation.