Datasheet

HG-C
13
Error indication
•
In case of errors, attempt the following measures.
Error indication Description Remedy
<Hold OFF>
<Hold ON>
Measured value blinks
Insufcient amount of reected light.
The sensing object is out of the sensing range.
Conrm that the sensing distance is within the
specication range.
Adjust the installation angle of the sensor.
Flash memory is damaged or is past its life expectancy. Please contact our ofce.
Load of the sensing output is short-circuited causing an
over-current to ow.
Turn OFF the power and check the load.
The semiconductor laser is damaged or is past its life
expectancy.
Please contact our ofce.
•
When zero set is set, the measurement is not
performed normally.
•
Since the display setting is set to “Offset”, the zero set
function can not be used.
•
Conrm that the sensing distance is within the
specication range.
•
Set the display to any setting except “Offset.”
During teaching, the measurement is not performed
normally.
Conrm that the sensing distance is within the
specication range.
System error Please contact our ofce.
PRECAUTIONS FOR PROPER USE
DIMENSIONS (Unit: mm in)
CAD data can be downloaded from our website.
HG-C□
Sensor
DOWN key
UP key
TEACH key
Laser emission indicator (green)
Output operation indicator (orange)
Teaching indicator (yellow)
Zero set indicator (yellow)
PRO indicator (yellow)
Beam-emitting axis
Beam-receiving axis
2-ø3.2
3.5
0.138
ø4.1 mm 0.161 in, 2 m 6.562 ft long cable (5-core composite cable)
3.5 0.138
20
0.787
6.3
0.248
Measurement center
distance (L)
25
0.984
θ
18
0.709
37
1.457
44
1.732
Model No. Measurement center distance (L)
HG-C1030(-P)
30 1.181 30°
HG-C1050(-P)
50 1.969 22.5°
HG-C1100(-P)
100 3.937 12.5°
HG-C1200(-P)
200 7.874 6.3°
HG-C1400(-P)
400 15.748 3.2°