Manualshelf

Datasheet

ManualsBrandsPanasonic ManualsOptical SensorsIO-Link Displacement Sensor 35mm PNP
11121314151617181920
15
Attached cable
Sensor
+
−
Load
Load
50 mA max.
(Blue) 0 V
(Black) Communication
output (C/Q)
(Note)
(White) Control output (DO)
(Brown) +V
50 mA max.
Color code
Attached cable
Sensor
(Blue) 0 V
IO-Link master
(Black) Communication output (C/Q)
(White) Control output (DO)
(Brown) +V
0 V
C/Q
DI
+V
Color code
WIRING DIAGRAMS
Terminal arrangement diagram of the connector on the sensor side
WIRING DIAGRAMS
Terminal No. Designation
+V
Communication output (C/Q) (Note)
Control output (DO)
0 V
<When using as an ordinary sensor>
<When using as an ordinary sensor>
<When connecting to the IO-Link master>
<When connecting to the IO-Link master>
Note: When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Note: When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Notes: 1) When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
2) Be sure to use the dedicated M12 connector cable attached to the product. Note that the pin arrangement is different from that for commercially
available M12 connector cables.
3) When wiring with the discrete wire or extending the cable from the dedicated M12 connector attached to the product, separately prepare commercially
available M12 connector cable.
DP-10□ZL3-M-P
DP-10□ZL3-M-P-C
Discrete wire type
M12 connector type
Dual Display Digital Pressure Sensor
DP-100L SERIES
DP-100L
SERIES
M12 connector
(Note 3)
M12 connector cable
attached to the product
(Note 2)
Sensor
+
−
Load
Load
0 V
Communication
output (C/Q)
(Note 1)
Control output (DO)
+V
M12 connector terminal No.
M12 connector
50 mA max.
50 mA max.
0 V
IO-Link masterM12 connector
Communication output (C/Q)
Control output (DO)
+V
0 V
C/Q
DI
+V
M12 connector terminal No.
M12 connector
(Note 3)
M12 connector cable
attached to the product
(Note 2)
Sensor
Note: When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
M12 connector terminal arrangement diagram
Terminal No. Designation
+V
Control output (DO)
0 V
Communication output (C/Q) (Note)
Control output (DO)
+V
0 V
Communication output (C/Q)
(Note)