Manualshelf

Datasheet

ManualsBrandsPANASONIC ManualsRelaysPCB relays 12 Vdc 20 A 2 makers HEV2AN-P
12345
HE-V
1
ds_61C06_0002_en_hev: 270213J
ORDERING INFORMATION
TYPES
Standard packing: Carton: 10 pcs.; Case: 50 pcs.
Max. 1,000 V DC, 20 A
cut-off possible
High capacity
power relays
HE-V RELAYS
Nominal coil voltage Part No.
6V DC HEV2aN-P-DC6V
9V DC HEV2aN-P-DC9V
12V DC HEV2aN-P-DC12V
15V DC HEV2aN-P-DC15V
24V DC HEV2aN-P-DC24V
FEATURES
• Compact size
(L: 41.0 W: 50.0 H: 39.4 mm
L: 1.614 W: 1.969 H: 1.551 inch)
Maximum 1,000 V DC, 20 A cut-off has
been achieved (at each 1 Form A
contact connected in series)
• Contact arrangement: 2 Form A
400 DC, 20 A per 1 Form A
• Contributes to energy saving in
devices thanks to reduced coil hold
voltage
Coil hold voltage can be reduced down
to 33% of the nominal coil voltage. This
equals to operating power of
approximately 210 mW.
*Coil hold voltage is the coil voltage
after 100 ms following application of the
nominal coil voltage.
• Clearance distance min. 8mm
• Creepage distance min. 9.6mm
• Protective construction: Flux-Resistant type
TYPICAL APPLICATIONS
• Photovoltaic power generation
systems
• Battery charge and discharge
systems
• Inverter control, DC load control, etc.
Contact connection
method
Contact arrangement
2a: 2 Form A (Single side stable type)
Pick-up voltage
N: 70% of nominal voltage
HEV 2a N P DC
Terminals
P: PC board terminal type
Coil voltage (DC)
6V, 9V, 12V, 15V, 24V

Summary of content (5 pages)