Operation Manual

6. Click "OK".
• The port settings are changed, and the port setting screen is displayed.
Note
• It is necessary to configure the port settings for sites up to the number of registered licenses.
Language Setting
You can specify the language used to display messages from the KX
-VC Series NAT Traversal Service.
1. Click the "Maintenance" screen selecting tab.
• The maintenance screen is displayed.
2. Click "Language Setting" in the maintenance menu list.
• The language setting screen is displayed.
3. Select the desired language from the "Language" pull-down menu.
4. Click "Set".
• Settings are saved and a message showing that saving is complete is displayed.
5. Click "OK".
• The language setting is saved, and the language setting screen is displayed.
Account Setting
You can add/delete user accounts or change the password of the user account for logging in to the
HDVC-MPCS Console.
Adding Accounts
1. Click the "Maintenance" screen selecting tab.
• The maintenance screen is displayed.
2. Click "Account Settings" in the maintenance menu list.
• The account setting screen is displayed.
Operating Instructions 43
Maintenance