Operation Manual

• The detailed result screen is displayed.
• After the KX-VC Series NAT Traversal Service period expires, clicking "Disable NAT
Traversal Service" will stop the service expiration message from appearing.
Port Setting
You can configure the ports for connecting the HDVC-MPCS using the KC-VC Series NAT Traversal Service.
Note
• You cannot configure the ports if activation of the KX-VC Series NAT Traversal Service is not complete.
1. Click the "Maintenance" screen selecting tab.
• The maintenance screen is displayed.
2. Click "Port Settings" in the maintenance menu list.
• The port setting screen is displayed.
3. Perform one of the following procedures to configure the settings:
Automatic entry:
1. Enter the first port number for Site 1’s WAN side.
2. Click "Auto Input for WAN".
• The WAN-side port numbers for other sites are assigned automatically.
1. Click "Same port on WAN and LAN".
• The port numbers for the LAN side are copied to the WAN side.
Entering manually:
• Set the following items in the setting area.
Operating Instructions 41
Maintenance