Operation Manual

2. Click "Network Status" in the maintenance menu list.
• The network status screen is displayed.
Note
• Perform the following operation if you want to change the IP address of the HDVC-MPCS for a
conference. In this case, it is also necessary to change the IP address of the server. For details,
contact your dealer.
1. Click "Change".
• The IP address entering screen is displayed.
2. Enter the IP address, and click "OK".
• The IP address is changed, and the network status screen is displayed.
• Use the following procedure to perform the connection test with the KX-VC Series NAT Traversal
Service.
1. Click
"Connection Test".
• The connection test with the KX-VC Series NAT Traversal Service begins.
2. Click "Refresh".
• The result of the connection test is displayed.
Note
• If some items are still being tested, click "Refresh" again after a few seconds.
3. Click "Show Results".
40 Operating Instructions
Maintenance