Operation Manual

Activation
By performing activation (license registration), you can increase the number of sites that can participate in a
conference and use the KX-VC Series NAT Traversal Service.
To
perform the activation, you must
obtain a Registration Key from your dealer and make a registration. First,
provide your dealer with the License No. and Registration ID on the Software License Card. The dealer will
enter this information into the Key Management System and then issue you with the Registration Key.
1. Click the "Maintenance" screen selecting tab.
• The maintenance screen is displayed.
2. Click "Activation" in the maintenance menu list.
• The activation screen is displayed.
3. Enter the Registration Key for the HDVC-MPCS or KX-VC Series NAT Traversal Service.
4. Click "Register".
• A message to confirm the performing of activation is displayed.
5. Click "OK".
• Activation is performed, and a message to show the completion of license registration is displayed.
6. Click "OK".
• The activation screen is displayed.
Note
• The features corresponding to the entered
Registration Key of the HDVC-MPCS or KX-VC Series NAT
Traversal Service are activated.
Network Status
You can check the network status of the HDVC-MPCS.
1. Click the "Maintenance" screen selecting tab.
• The maintenance screen is displayed.
Operating Instructions 39
M
a
i
n
t
e
n
a
n
c
e
Maintenance