Operation Manual

Item Description Value range Default
Display Position
Switching
Set whether to display the site with
the highest volume (speaker) in the
first priority position automatically
or
to change the display position of
the site image manually.
Voice Activation, Manual Manual
Settings for HD Video
Bandwidth Set the maximum bandwidth per
site connected with HD video.
Individual settings for each site
cannot be made.
512 kbps, 768 kbps,
1.0 Mbps, 1.5 Mbps,
2.0 Mbps
1.0 Mbps
Site Name Display Specifies whether to display the
site's name on each site image
during a conference connected
with HD video.
Show, Hide Show
Settings for SD Video
Bandwidth Set the maximum bandwidth per
site connected with SD video.
Individual settings for each site
cannot be made.
384 kbps, 512 kbps,
768 kbps, 1.0 Mbps,
1.5 Mbps
512 kbps
Site Name Display Specifies whether to display the
site's name on each site image
during a conference connected
with SD video.
Show, Hide Hide
Note
• Make sure to set the value of "Bandwidth" for the HD video settings higher than that for the SD
video settings.
• If the value of "Bandwidth" for the SD video settings is lower than the participants' bandwidth, a
conference is established with HD video and the HDVC-MPCS sends HD video image. However,
for the participants incapable of receiving HD video image, SD video image is sent. Also, if the
value of "Bandwidth" for the
SD video settings is higher than the bandwidth of the participants, a
conference is established with SD video and the HDVC-MPCS sends SD video image.
*1
These settings are available for profiles for dial out in Ad-Hoc Mode. These settings are used when configuring a profile with an
ID number from 101 to 110.
*2
If you configure the encryption settings, you will only be able to establish video conference calls with a party that has the same
encryption key, so you can prevent making calls to, or receiving calls from, unknown parties unintentionally.
*3
While being entered, the characters of the encryption key are displayed, but once the settings are saved, all the characters will
be displayed as asterisks (*), and you will no longer be able to check the encryption key on the screen. Record the encryption
key beforehand, and store it in a safe location.
*4
The maximum number of sites that can join a conference at the same time is 16 (depending on the number of license ports).
You can select which sites to join a conference from the sites that are registered in the profile at the start of the conference.
5. Click "Set".
• The setting of the profile is saved, and the profile list screen is displayed.
34 Operating Instructions
Settings and Registration