Operation Manual

Item Description Value range Default
Endpoint List
*1
Set the sites that can participate in
the conference.
Note
• The order of registration
corresponds with the
display priority.
Select from the address book:
1. Click "Address Book".
2. Select the site you want to set,
and click "OK".
Enter the address directly:
1. Click "Add".
2. Enter the IP address or the
KX-VC Series NAT Traversal
Service Terminal ID of the site
in "IP
Address", and then click
"OK"
.
Note
• Enter the IP address
within the following
range:
Class A: 1.0.0.0–
126.255.255.255
Class B: 128.0.0.0–
191.255.255.255
Class C: 192.0.0.0–
223.255.255.255
• You cannot add sites
that have the same IP
address or Terminal ID
for the KX-VC Series
NAT Traversal Service.
2 to 32 sites
*4
―
Manual Control Set whether to change the screen
layout or display
position of the
site
image manually during a
conference. When this setting is
disabled, the order of registration in
"Endpoint List" corresponds to
the display priority.
Enable, Disable Enable
Screen Layout
Switching
Set whether to change the screen
layout automatically according to
the number of sites in the
conference or manually.
Auto, Manual Manual
Operating Instructions 33
Settings and Registration