Operation Manual

Item Description Value range Default
Voice Activated(VA)
Switching
*1
Specifies whether to use the
Voice Activated Switching feature
(The site with the highest volume
[speaker] is displayed in the first
priority position automatically).
Enable, Disable Enable
Auto conference
start
*1
Set whether to start an Ad-Hoc
conference automatically when
the HDVC-MPCS restarts.
Yes, No No
Encryption
*1*2
Set whether to enable encryption
or not.
Enable, Disable Disable
Encryption Key
*1*2
Set the encryption key when the
encryption setting is enabled.
4-256 characters
―
Settings for HD Video
Bandwidth
*1
Set the maximum bandwidth per
site connected with HD video.
Individual settings for each site
cannot be made.
512 kbps, 768 kbps,
1.0 Mbps, 1.5 Mbps,
2.0 Mbps
1.0 Mbps
Screen Layout
*1
Set the screen layout in a
conference connected with HD
video.
CP1, CP4, CP6, CP8,
CP10, CP13, CP16
CP8
Site Name Display
*1
Specifies whether to display the
site's name on each site image
during a conference connected
with HD video.
Show, Hide Show
Settings for SD Video
Bandwidth
*1
Set the maximum bandwidth per
site connected with SD video.
Individual settings for each site
cannot be made.
384 kbps, 512 kbps,
768 kbps, 1.0 Mbps,
1.5 Mbps
512 kbps
Screen Layout
*1
Set the screen layout in a
conference connected with SD
video.
CP1, CP4, CP6, CP8,
CP10, CP13, CP16
CP4
Site Name Display
*1
Specifies whether to display the
site's name on each site image
during a conference connected
with SD video.
Show, Hide Show
Note
• Make sure to set the value of "Bandwidth" for the HD video settings higher than that for the SD
video settings.
• If the value of "Bandwidth" for the SD video settings is lower than the participants' bandwidth, a
conference is established with HD video and the HDVC-MPCS sends HD video image. However,
for the participants incapable of receiving HD video image, SD video image is sent. Also, if the
30 Operating Instructions
Settings and Registration