Operation Manual

2. Click the "Traffic" tab in the operation area.
• The traffic status screen is displayed.
Note
• When a site in a conference is using "NAT Traversal Service", the Terminal ID is displayed in
"Terminal Address".
• Click "Refresh", and the latest status will be shown on the screen.
Ending a Conference
1. Click the "Home" screen selecting tab.
• The Home screen is displayed.
2. Click the
"Conference Start/End" tab in the operation area.
3. Click "End Conference".
• The conference ends with all the sites in the conference disconnected, and then the select conference
mode screen is displayed.
26 Operating Instructions
Basic Operation