Operation Manual

3. Click "OK".
• The selected site is disconnected from the conference.
Disconnect all sites:
1. Click "Disconnect All".
• A dialogue box to confirm the disconnection is displayed.
2. Click "OK".
• All sites are disconnected from the conference.
Note
• If the site has been disconnected, the site’s name (or IP address//Terminal ID of the KX-VC Series
NAT Traversal Service) and "left" will be displayed on the site’s screen for approximately 5 seconds.
To check the disconnection of the site on the site’s screen, hide the guides and icons for the site. For
details, refer to the Operating Manual or User Manual of the HD Visual Communication Unit.
Checking the Status of the Conference
1. Click the "Home" screen selecting tab.
• The Home screen is displayed.
2. Click the
"Conference Status" tab in the operation area.
• The conference status screen is displayed.
Note
• Click "Refresh", and the latest status will be shown on the screen.
Checking the Traffic
The status of the traffic for the sites in a conference is displayed.
1. Click the "Home" screen selecting tab.
• The Home screen is displayed.
Operating Instructions 25
Basic Operation