Operation Manual

4. Select the display position from the "Display Position Switching" drop-down list.
"Top": The first priority position
"Bottom": The last priority position
"Hide": Not displayed
5. Click
"Execute".
• A dialogue box to confirm the change of the display position is displayed.
6. Click "OK".
• The display position of the site is changed.
Muting/Unmuting the Audio (Normal Mode only)
Note
• To perform this operation, "Manual Control" in the profile
must be set to "Enable". For details, refer
to "Profile Settings".
1. Click the "Home" screen selecting tab.
• The Home screen is displayed.
2. Click the "Conference Operation" tab in the operation area.
• The conference operation screen is displayed.
3. Select the site you want to mute/unmute from the "Active Participant List".
4. Select "ON" (mute) or "OFF" (unmute) for "Mute/Unmute Switching".
5. Click "Execute".
• A dialogue box to confirm the muting/unmuting is displayed.
6. Click "OK".
• The selected site is muted/unmuted.
20 Operating Instructions
Basic Operation