Operation Manual

Introduction
About this Manual
This manual describes how to operate the HDVC
-MPCS from the HDVC-MPCS Console. By using the
HDVC-MPCS Console, you can perform
operations such as starting a conference, changing the screen layout,
changing address book settings etc.
The HDVC-MPCS Console can be used by simply accessing a server that has the HDVC-MPCS software
installed from your computer’s browser. Special software is not required.
Feature Highlights
Image
HDVC-MPCS
HD Visual Communication Mobile
HD Visual
Communication
Mobile
HDVC-MPCS
Console
KX-VC Series
NAT Traversal Service
HDVC-MPCS
is
multi
-point
conference
software
that enables setting up a flexible SIP communication system
with 6 to 16 participants for the HD Visual Communication Unit or the HD Visual Communication Mobile.
It is possible to separate the conference screen into a maximum of 16 parts, and customise the screen layout
or display position of the participants.
Sites that can be Connected
• To connect to the HDVC-MPCS, the software version of the HD Visual Communication Unit must be
2.20 or later.
• To connect to the HDVC-MPCS, the software version of the HD Visual Communication Mobile for
Android™ must be 2.0 or later.
• To connect to the HDVC-MPCS, the software version of the HD Visual Communication Mobile for
Windows
®
must be 2.0 or later.
• When using encryption and KX-VC series NAT Traversal Service with the HD Visual Communication Unit,
it is necessary to update the software to version 3.00 or later.
• When using the KX-VC500 to connect to the HDVC-MPCS, it is necessary to activate the Connection
Enhancement feature with an activation key card (sold separately). For details about this feature, refer to
the Operating Manual or User Manual of the HD Visual Communication Unit.
2 Operating Instructions
Introduction