Operation Manual

Making a Conference In Ad-Hoc Mode
1. Click the "Home" screen selecting tab.
• The Home screen is displayed.
2. Click the "Conference Start/End" tab in the operation area.
• The select conference mode screen is displayed.
3. Select "Ad-Hoc Mode" in "Conference Mode".
4. Click "Next".
• The conference start screen is displayed.
5. Select sites to dial out to by following one of the following instructions.
Select from the address book:
1. Click "Address Book".
2. Select sites to dial out to.
3. Click "OK".
Select from the profile:
1. Click "Profile".
2. Enter the ID number of the profile to dial out to.
3. Click "OK".
Enter the address directly:
18 Operating Instructions
Basic Operation