Operation Manual

Starting a Conference
Making a Conference In Normal Mode
A conference is made with the sites registered in a profile. You can select which sites participate in the
conference and which sites to not dial out to, from the registered sites.
1. Click the "Home" screen selecting tab.
• The Home screen is displayed.
2. Click the "Conference Start/End" tab in the operation area.
• The select conference mode screen is displayed.
3. Set the following items:
"Conference Mode": Select "Normal Mode".
"Profile": Select the profile to use from the drop-down list.
Note
• To select a profile, it is necessary to configure the profile in advance (Page 31).
4. Click "Next".
• The conference start screen is displayed.
16 Operating Instructions
Basic Operation