Operation Manual

Changing Screen Layout
There are 3 methods to change screen layout, as follows:
Automated Layout
The screen layout changes automatically depending on the number of sites in the conference.
Number of sites Layout number
1 CP1
2-4 CP4
5-6 CP6
7-8 CP8
9-10 CP10
11-13 CP13
14-16 CP16
Note
• To have the screen layout change automatically, the setting must be configured in Basic Settings (in
Ad-Hoc Mode) or in a
profile (in Normal Mode). For details, refer to "Basic Settings" (in Ad-Hoc Mode)
or "Profile Settings" (in Normal Mode).
Manual Layout (Normal Mode Only)
The screen layout can be changed manually during the conference. For details, refer to "Changing Screen
Layout (Normal Mode Only)".
Fixed Layout
The sites’ images are displayed according to the screen layout configured before the conference. Screen layout
cannot be changed during the conference. For details, refer to "Basic Settings" (in Ad-Hoc Mode) or "Profile
Settings" (in Normal Mode).
Changing the Display Position of the Site Image
You can change the display position of site images within the screen layout using one of the following 3
methods.
Voice Activated Switching
The site with the highest volume (speaker) is displayed in the first priority position automatically. For details,
refer to "Basic Settings" (in Ad-Hoc Mode) or "Profile Settings" (in Normal Mode).
Note
• After the Voice Activated Switching feature is performed, it cannot be performed again for
approximately 5 seconds (default).
Operating Instructions 13
Preparation