Operating instructions

ManualsBrandsPanasonic ManualsCamcordersHDCSDT750EB

Operating Instructions

High Definition Video Camera

Model No. HDC-SDT750

Before use, please read these instructions completely.

VQT3B28

until

2010/9/16

Model number suffix “EB” denotes UK model.

HDC-SDT750EB-VQT3B28_mst.book 1 ページ２０１０年８月２０日　金曜日　午後３時１５分

Summary of content (168 pages)

PAGE 1
HDC-SDT750EB-VQT3B28_mst.book 1 ページ２０１０年８月２０日金曜日午後３時１５分 Operating Instructions High Definition Video Camera Model No. HDC-SDT750 Before use, please read these instructions completely. Model number suffix “EB” denotes UK model.
PAGE 2
HDC-SDT750EB-VQT3B28_mst.book 2 ページ２０１０年８月２０日金曜日午後３時１５分 Information for Your Safety Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic High Definition Video Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc.
PAGE 3
HDC-SDT750EB-VQT3B28_mst.book 3 ページ２０１０年８月２０日 IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue.
PAGE 4
HDC-SDT750EB-VQT3B28_mst.book 4 ページ２０１０年８月２０日 The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle. Warning Risk of fire, explosion and burns. Do not disassemble. Do not heat the batteries above the following temperatures or incinerate.
PAGE 5
HDC-SDT750EB-VQT3B28_mst.book 5 ページ２０１０年８月２０日 [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Cd Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol.
PAGE 6
HDC-SDT750EB-VQT3B28_mst.book 6 ページ２０１０年８月２０日金曜日午後３時１５分 Contents Information for Your Safety.....................2 Accessories..............................................9 Preparation Before using [1] Parts identification and handling ...................................... 10 Setup [1] Power supply.............................. 14 Charging the battery .................... 14 Inserting/removing the battery ..... 15 Charging and recording time........ 16 Connecting to the AC outlet .........
PAGE 7
２０１０年８月２０日 With a TV [1] Watching Video/Pictures on your TV...................................... 101 Connecting with a HDMI mini cable .......................................... 104 Listening in 5.1 channel sound ......................................... 104 Connecting with the AV multi cable .......................................... 104 [2] 3D video playback.................... 105 Functions not available during 3D playback .................... 106 [3] Playback using VIERA Link (HDAVI Control™) ........
PAGE 8
HDC-SDT750EB-VQT3B28_mst.book 8 ページ２０１０年８月２０日 ∫ Sales and Support Information Customer Care Centre ≥ For customers within the UK: 0844 844 3852 ≥ For customers within the Republic of lreland: 01 289 8333 ≥ Visit our website for product information www.panasonic.co.uk. ≥ E-mail: customer.care@panasonic.co.
PAGE 9
HDC-SDT750EB-VQT3B28_mst.book 9 ページ２０１０年８月２０日金曜日午後３時１５分 Accessories Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of Aug. 2010. These may be subject to change.
PAGE 10
HDC-SDT750EB-VQT3B28_mst.book 10 ページ２０１０年８月２０日 Preparation Before using 1 1 23 4 5 1 2 3 4 6 11 12 13 14 16 17 18 19 20 21 22 23 24 10 VQT3B28 午後３時１５分 Parts identification and handling 7 8 9 10 15 金曜日 Speaker Power button [ ] (l 21) Inlet (cooling fan) (l 26) Intelligent auto/Manual button [iA/MANUAL] (l 31, 82) 5 Optical image stabilizer button [ O.I.S.
PAGE 11
HDC-SDT750EB-VQT3B28_mst.book 11 ページ２０１０年８月２０日 25 金曜日午後３時１５分 25 LCD monitor (Touch screen) (l 23) 26 ≥ It can open up to 90o. 27 28 29 30 31 ≥ It can rotate up to 180o A towards the lens or 90o B towards the viewfinder. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
PAGE 12
HDC-SDT750EB-VQT3B28_mst.
PAGE 13
HDC-SDT750EB-VQT3B28_mst.book 13 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ About the 3D Conversion Lens (l 52) 1 2 3 4 5 1 2 3 4 5 Attachment screw Protective glass (front) Lens Adjustment dial cover Vertical position adjustment dial 6 Vertical alignment adjustment dial 7 Horizontal image position adjustment dial [ ] Protective glass (rear) Camera body attachment part (convex) 8 9 [ [ ] ] 6 7 8 9 Lens front cap 10 10 Horizontal line for adjustment ≥ Use to adjust the lens attachment position.
PAGE 14
HDC-SDT750EB-VQT3B28_mst.book 14 ページ２０１０年８月２０日 Preparation Setup 1 金曜日午後３時１５分 Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. ≥ The unit has a function for distinguishing batteries which can be used safely. The dedicated battery (VW-VBG130/VW-VBG260/VW-VBG6) supports this function.
PAGE 15
HDC-SDT750EB-VQT3B28_mst.book 15 ページ２０１０年８月２０日金曜日午後３時１５分 ≥ We recommend using Panasonic batteries (l 9, 16, 163). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure.
PAGE 16
HDC-SDT750EB-VQT3B28_mst.book 16 ページ２０１０年８月２０日金曜日午後３時１５分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC/humidity: 60%RH Battery model number [Voltage/Capacity (minimum)] Supplied battery/ VW-VBG130 (optional) [7.2 V/1250 mAh] VW-VBG260 (optional) [7.2 V/2500 mAh] VW-VBG6 (optional)* [7.
PAGE 17
HDC-SDT750EB-VQT3B28_mst.book 17 ページ２０１０年８月２０日金曜日午後３時１５分 * The battery pack holder kit VW-VH04 (optional) is necessary. ≥ These times are approximations. ≥ The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/low temperature. ≥ Recordable time of 3D recording mode is the same. (During 3D recording mode, 1080/50p recording mode can not be used.
PAGE 18
HDC-SDT750EB-VQT3B28_mst.book 18 ページ２０１０年８月２０日金曜日午後３時１５分 Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit.
PAGE 19
HDC-SDT750EB-VQT3B28_mst.book 19 ページ２０１０年８月２０日 Preparation Setup 2 金曜日午後３時１５分 Recording to a card This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC memory card with other equipment, check the equipment is compatible with these memory cards. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.
PAGE 20
HDC-SDT750EB-VQT3B28_mst.book 20 ページ２０１０年８月２０日金曜日午後３時１５分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 43) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Caution: Check that the access lamp has gone off. Access lamp [ACCESS] A ≥ When this unit is accessing the SD card, the access lamp lights up.
PAGE 21
HDC-SDT750EB-VQT3B28_mst.book 21 ページ２０１０年８月２０日 Preparation Setup 3 金曜日午後３時１５分 Turning the unit on/off You can turn the unit on and off using the power button, the LCD monitor or the viewfinder. Turning the unit on and off with the power button Press the power button to turn on the unit To turn off the unit Hold down the power button until the status indicator goes off. A The status indicator lights.
PAGE 22
HDC-SDT750EB-VQT3B28_mst.book 22 ページ２０１０年８月２０日 Preparation Setup 4 金曜日午後３時１５分 Selecting a mode Change the mode to recording or playback. Operate the mode dial to change the mode to ≥ Align with the status indicator A. Motion picture recording mode (l 27) Still picture recording mode (l 29) Playback mode (l 33, 86) 22 VQT3B28 , or .
PAGE 23
HDC-SDT750EB-VQT3B28_mst.book 23 ページ２０１０年８月２０日 Preparation Setup 5 金曜日午後３時１５分 Adjusting LCD monitor/ viewfinder How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. ∫ About the operation icons / / / : These icons are used to switch the menu and thumbnail display page, for item selection and setting etc.
PAGE 24
HDC-SDT750EB-VQT3B28_mst.book 24 ページ２０１０年８月２０日 Viewfinder adjustment ∫ Adjusting the field of view It adjusts the field of view to show the images on the viewfinder clearly. Adjust the focus by rotating the eyepiece corrector dial. ≥ Extend the viewfinder and close the LCD monitor to turn on the viewfinder. 金曜日午後３時１５分 Recording showing the contents to a partner ¬ Change the mode to or . Extend the viewfinder and rotate the LCD monitor towards the lens side.
PAGE 25
HDC-SDT750EB-VQT3B28_mst.book 25 ページ２０１０年８月２０日 Preparation Setup 6 金曜日午後３時１５分 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Change the mode to 1 or . Select the menu. : [SETUP] # [CLOCK SET] 2 Touch the date or time to be set, then set the desired value using / .
PAGE 26
HDC-SDT750EB-VQT3B28_mst.book 26 ページ２０１０年８月２０日 Basic Recording/ Playback 1 金曜日午後３時１５分 Before recording ∫ Basic camera positioning 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use sub recording start/stop button A when holding the unit around your waist. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. ≥ When you are outdoors, record pictures with the sunlight behind you.
PAGE 27
HDC-SDT750EB-VQT3B28_mst.book 27 ページ２０１０年８月２０日 Basic Recording/ Playback 2 金曜日午後３時１５分 Recording motion pictures 1 2 Change the mode to 3 Press the recording start/stop button to start recording. . Open the LCD monitor or extend the viewfinder. B When you begin recording, ; changes to ¥. 4 Press the recording start/stop button again to pause recording. ≥ Align with the status indicator A. ≥ Still pictures can be recorded while recording the motion picture.
PAGE 28
HDC-SDT750EB-VQT3B28_mst.book 28 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ Screen indications in the motion picture recording mode 0h00m00s HG R 1h20m A Recording mode B Approximate remaining recordable time (When the remaining time is less than 1 minute, [R 0h00m] flashes red.) C Recording time elapsed Each time the unit is put into recording pause, the counter display will be reset to “0h00m00s”. (“h” is an abbreviation for hour, “m” for minute and “s” for second.
PAGE 29
HDC-SDT750EB-VQT3B28_mst.book 29 ページ２０１０年８月２０日 Basic Recording/ Playback 3 金曜日午後３時１５分 Recording still pictures 1 2 Change the mode to 3 Press the button halfway. (For auto focus only) 4 Press the . Open the LCD monitor or extend the viewfinder. button fully. ≥ Align with the status indicator A. Focus indication:   A Focus indication ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful.
PAGE 30
HDC-SDT750EB-VQT3B28_mst.book 30 ページ２０１０年８月２０日 ∫ About the screen indications in still picture recording MEGA 14.2M R3000 : ß: ßj: : MEGA : : : 14.2M : R3000: : Still picture operation indicator (l 135) Flash (l 61) Flash level (l 61) Red eye reduction (l 61) MEGA optical image stabilizer (l 29) Optical image stabilizer (l 48) Quality of still pictures (l 79) Size of still pictures (l 78) Remaining number of still pictures (Flashes in red when [0] appears.
PAGE 31
HDC-SDT750EB-VQT3B28_mst.book 31 ページ２０１０年８月２０日 Basic Recording/ Playback 4 金曜日午後３時１５分 Intelligent auto mode The following modes appropriate for the condition are set just by pointing the unit to what you want to record. /MANUAL Intelligent auto/Manual button Press this button to switch intelligent auto mode/manual mode. ≥ Please refer to page 82 about manual mode.
PAGE 32
HDC-SDT750EB-VQT3B28_mst.book 32 ページ２０１０年８月２０日金曜日午後３時１５分 ≥ Faces cannot be detected depending on the recording conditions, such as when faces are of certain sizes or at certain tilts or when digital zoom is used. ≥ The microphone setup is set to surround in the intelligent auto mode. (l 73) ∫ Intelligent auto mode When switching to intelligent auto mode, the auto white balance and auto focus operate and automatically adjust the colour balance and focusing.
PAGE 33
HDC-SDT750EB-VQT3B28_mst.book 33 ページ２０１０年８月２０日 Basic Recording/ Playback 5 金曜日午後３時１５分 Motion picture/Still picture playback ≥ Align with the status indicator A. 1 2 Change the mode to 3 Select the [VIDEO/PICTURE] you wish to play back. . Touch the play mode select icon B.  ≥ Touch [ENTER]. 4 Touch the scene or the still picture to be played back.  is displayed when [1080/50p] is touched or is displayed when [AVCHD] is touched in step 3.
PAGE 34
HDC-SDT750EB-VQT3B28_mst.book 34 ページ２０１０年８月２０日 5 金曜日午後３時１５分 Select the playback operation by touching the operation icon. A Operation icon 0h00m00s ≥ Touch icon. F / F to display/not-display the operation F  Motion picture playback 1/;: 6: 5: ∫: 1: 34 VQT3B28 Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. Displays the direct playback bar.
PAGE 35
HDC-SDT750EB-VQT3B28_mst.book 35 ページ２０１０年８月２０日 ∫ Change the thumbnail display While the thumbnail is displayed, the thumbnail display changes in the following order if the zoom lever or adjust zoom buttons are operated to side or side. 20 scenes () 9 scenes () 1 scene () Highlight&Time frame index* (l 88) * Highlight&Time frame index can only set in motion picture playback mode. ≥ 9 scenes display returns if the unit is turned off or the mode is changed.
PAGE 36
HDC-SDT750EB-VQT3B28_mst.book 36 ページ２０１０年８月２０日 Basic Setup 1 2 3 1 Press the MENU button. 4 Touch the desired item to enter the setting. 5 Touch [EXIT] or press the MENU button to exit the menu setting. Touch the top menu A. Touch the submenu B. ≥ Next (previous) page can be displayed by touching / .
PAGE 37
HDC-SDT750EB-VQT3B28_mst.book 37 ページ２０１０年８月２０日金曜日午後３時１５分 Using the quick menu This allows quick setting of some of the menus. 1 Press the Q.MENU button. The following menus can be set. Touch the desired menu. ≥ The items displayed differ depending on the position of the mode dial or settings. Icon 14.2M / 13.
PAGE 38
HDC-SDT750EB-VQT3B28_mst.book 38 ページ２０１０年８月２０日 Basic 2 Setup 金曜日午後３時１５分 Using the Setup Menu ≥ The items displayed differ depending on the position and settings of the mode dial. Select the menu. : [SETUP] # desired setting [DISPLAY] [OFF]/[ON] The screen display can be changed to [OFF] (a portion of information displayed) or [ON] (all information displayed). ≥ It is possible to set from the quick menu. (l 37) [CLOCK SET] Please refer to page 25.
PAGE 39
HDC-SDT750EB-VQT3B28_mst.book 39 ページ２０１０年８月２０日 5 (Only when setting the region of your travel destination) 午後３時１５分  Touch / to select your travel destination and touch [ENTER]. ≥ Touch [SUMMER TIME SET] to set daylight saving time. appears and the summer time setting is turned on. The travel destination time and time difference from the home region time are set forward by one hour. Touch [SUMMER TIME SET] again to return to the normal time setting. ≥ Close the setting by pressing the MENU button.
PAGE 40
HDC-SDT750EB-VQT3B28_mst.book 40 ページ２０１０年８月２０日 [QUICK POWER ON] 金曜日午後３時１５分 [OFF]/[ON] The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set to or . ≥ Depending on the recording conditions, start time may be longer than 1 second. ≥ In the quick power on mode, the zoom magnification becomes 1k. [QUICK START] [OFF]/[ON] This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is reopened or the viewfinder is extended.
PAGE 41
HDC-SDT750EB-VQT3B28_mst.book 41 ページ２０１０年８月２０日 [REMOTE CONTROL] 金曜日午後３時１５分 [OFF]/[ON] Please refer to page 45. [REC LAMP] [OFF]/[ON] The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording. [ALERT SOUND] [OFF]/ / Touch screen operation, start and stop of recording and unit on/off can be confirmed with this sound.
PAGE 42
HDC-SDT750EB-VQT3B28_mst.book 42 ページ２０１０年８月２０日金曜日 [EVF SET] It adjusts the brightness of the viewfinder. ≥ These settings will not affect the images actually recorded. 1 2 Extend the viewfinder and open the LCD monitor. Touch [EVF SET]. ≥ The viewfinder turns on. 3 Touch / to adjust the setting. ≥ Adjust while checking the picture in the viewfinder. 4 Touch [ENTER]. ≥ Touch [EXIT] or press the MENU button to complete the setting. [AV MULTI] [COMPONENT]/[AV OUT] Please refer to page 104.
PAGE 43
HDC-SDT750EB-VQT3B28_mst.book 43 ページ２０１０年８月２０日金曜日午後３時１５分 [INITIAL SET] Set to [YES] for changing the menu settings back to the default condition. ≥ Settings for [CLOCK SET] and [LANGUAGE] will not be changed. [FORMAT CARD] Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 109, 120) ≥ When formatting is complete, touch [EXIT] to exit the message screen.
PAGE 44
HDC-SDT750EB-VQT3B28_mst.book 44 ページ２０１０年８月２０日 [DEMO MODE] 金曜日午後３時１５分 [OFF]/[ON] This item is used to start the unit demonstration. (Only when the mode is at the or position) If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted, the demonstration automatically starts. If any operation takes place, the demonstration is cancelled. However if no operations take place for approx. 10 minutes, the demonstration automatically starts again.
PAGE 45
HDC-SDT750EB-VQT3B28_mst.book 45 ページ２０１０年８月２０日 Basic 3 Setup : [SETUP] # [REMOTE CONTROL] # [ON] 2 3 4 START/ STOP /VOL DATE/TIME EXT DISPLAY SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP 5 6 午後３時１５分 Using with the remote control Select the menu. 1 金曜日 7 8 9 10 Menu button [MENU]* 11 OK button [OK] * means that these buttons function in the same manner as the corresponding buttons on the unit. Remove the insulation sheet A before using.
PAGE 46
HDC-SDT750EB-VQT3B28_mst.book 46 ページ２０１０年８月２０日 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. 金曜日午後３時１５分 Operation of direction buttons/OK button 1 Press a direction button. STILL ADV PAUSE SKIP STOP SKIP MENU OK Warning Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth.
PAGE 47
HDC-SDT750EB-VQT3B28_mst.book 47 ページ２０１０年８月２０日 Advanced 1 Recording (Advanced) 金曜日午後３時１５分 Zoom in/out function The maximum optical zoom ratio is 12k. The default setting of the [ZOOM MODE] is [Opt.Zoom 12k]. (l 65) ¬ Change the mode to or . VOL Zoom lever/Adjust zoom buttons W 6 W T T W VOL T Ring zoom Extra optical zoom Zoom operation can be done using the multi manual ring. Zoom by rotating the ring.
PAGE 48
HDC-SDT750EB-VQT3B28_mst.book 48 ページ２０１０年８月２０日 Advanced Recording (Advanced) 2 金曜日午後３時１５分 Image stabilizer function Use the image stabilizer to reduce the effects of shake during recording. This unit is equipped with HYBRID O.I.S. HYBRID O.I.S. is a hybrid of optical and electrical image stabilizer. ¬ Change the mode to or O.I.S. . Optical image stabilizer button Press the button to turn optical image stabilizer on/off. (Motion picture recording mode) / # OFF ≥ When [HYBRID O.I.S.
PAGE 49
HDC-SDT750EB-VQT3B28_mst.book 49 ページ２０１０年８月２０日金曜日午後３時１５分 Optical image stabilizer lock In motion picture recording mode, you can further improve optical image stabilization by touching and holding O.I.S. LOCK icon. With this function, you can further reduce the effects of the shake that tends to occur when using zoom. F A O.I.S. LOCK icon ≥ Press the Optical image stabilizer button to switch the image stabilizer to ON. ≥ is displayed while you are touching the icon.
PAGE 50
HDC-SDT750EB-VQT3B28_mst.book 50 ページ２０１０年８月２０日 Advanced Recording (Advanced) 3 金曜日午後３時１５分 AF/AE tracking It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking) ¬ Change the mode to 1 Touch or . . ≥ will be displayed on the screen. ≥ When [FACE RECOG.] (l 67) is [ON] and a registered face is detected, the target is automatically locked.
PAGE 51
HDC-SDT750EB-VQT3B28_mst.book 51 ページ２０１０年８月２０日 Advanced Recording (Advanced) 4 金曜日午後３時１５分 1080/50p recording This is a 1080/50p (1920k1080/50 progressive) recording mode that can record in maximum quality*. * This means the highest quality for this unit. Latest information, such as which Panasonic TVs can play back the scenes recorded in 1080/50p recorded with this unit, can be found on the following support site. (As of Aug. 2010) http://panasonic.jp/support/global/cs/e_cam/index.
PAGE 52
HDC-SDT750EB-VQT3B28_mst.book 52 ページ２０１０年８月２０日 Advanced Recording (Advanced) 5 金曜日午後３時１５分 Recording 3D video With the supplied 3D Conversion Lens attached, you can record life-like and powerful 3D video. To view 3D video, a television that supports 3D is required. 3D video The image is an illustration. ≥ In the unit, the recordable 3D videos are side-by-side format (2-screen structure).
PAGE 53
HDC-SDT750EB-VQT3B28_mst.book 53 ページ２０１０年８月２０日 3 金曜日午後３時１５分 Tighten the attachment screw of the 3D Conversion Lens by rotating to LOCK. ≥ Be careful not to overtighten. If the 3D Conversion Lens is overtightened, it may not be possible to remove it from the unit. ≥ Attach the 3D Conversion Lens securely so it will not tilt or move. LOCK ∫ Recording 3D video When using for the first time, be sure to adjust the 3D Conversion Lens attachment position. ≥ Turn off the unit. ≥ Change the mode to .
PAGE 54
HDC-SDT750EB-VQT3B28_mst.book 54 ページ２０１０年８月２０日 5 金曜日午後３時１５分 Open the adjustment dial cover. ≥ When turning the adjustment dials, hold the 3D Conversion Lens in the palm of your hand from the bottom and operate with the fingers of your other hand without applying too much force from above. When checking the adjustment, check with your fingers off the adjustment dials. 6 (After checking the operation description, touch [NEXT].
PAGE 55
HDC-SDT750EB-VQT3B28_mst.book 55 ページ２０１０年８月２０日 8 金曜日午後３時１５分 Removing the lens front cap. ≥ Touch [NEXT]. 9 (After checking the operation description, touch [NEXT].) Adjust the vertical alignment adjustment dial position of the subject shown duplicated. to align the vertical 7/8 7/8  ≥ Aim the unit at a subject from a distance of approximately 1.2 m to 2 m, and keep the image shown level by using the guidelines A. ≥ Difference in horizontal direction is characteristic of 3D video.
PAGE 56
HDC-SDT750EB-VQT3B28_mst.book 56 ページ２０１０年８月２０日金曜日午後３時１５分 ≥ Use of a tripod is recommended for recording with a stable picture. ≥ The reception range for the remote control might become narrow at the upper side of the unit, so operate from the lower side. (l 46) ≥ You will hear a sound when the unit is moved rapidly with the 3D Conversion Lens attached, but this is not a malfunction.
PAGE 57
HDC-SDT750EB-VQT3B28_mst.book 57 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ Functions that cannot be used during 3D recording When recording with the 3D Conversion Lens, you cannot use certain functions. Functions not available during 3D recording (Button/lever operations) j Zoom in/out function*1 j HYBRID O.I.S.
PAGE 58
HDC-SDT750EB-VQT3B28_mst.book 58 ページ２０１０年８月２０日 Advanced 6 Recording (Advanced) 金曜日午後３時１５分 Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. ¬ Change the mode to 1 or . Touch to display the operation icons on the screen. F F ≥ Touch 1 at the bottom right of the screen to change the page and touch F / F to display/not-display the operation icon. 2 (e.g. Backlight compensation) Select an operation icon.
PAGE 59
HDC-SDT750EB-VQT3B28_mst.book 59 ページ２０１０年８月２０日金曜日午後３時１５分 Fade When you start recording, the image/audio gradually appears. (Fade in) When you pause recording, the image/audio gradually disappears. (Fade out) ≥ The fade setting is cancelled when the recording stops. (Fade in) ∫ To select the colour for fade in/out : [RECORD SETUP] # [FADE COLOUR] # [WHITE] or [BLACK] (Fade out) ≥ The thumbnails of scenes recorded using fade in become black (or white).
PAGE 60
HDC-SDT750EB-VQT3B28_mst.book 60 ページ２０１０年８月２０日金曜日午後３時１５分 Smile shot When a smiling face is detected during motion picture recording, the unit automatically records a still picture. The icon changes each time it is touched. (ON) # (Face recognition) # OFF : : OFF: The unit records a still picture on detecting a smiling face. Still pictures are only recorded when the face of a person registered using face recognition (l 67) is detected. Cancel the setting.
PAGE 61
HDC-SDT750EB-VQT3B28_mst.book 61 ページ２０１０年８月２０日金曜日午後３時１５分 Built-in flash When the button is pressed, the flash is activated and the picture will be recorded. Use the built-in flash in order to record still pictures in dark places. Each time the ß icon is selected, the indication changes by one setting in the following order: ß ([ON]) # ßA ([AUTO]) # ([OFF]) ≥ The unit automatically determines if the flash is necessary even when it has been set to by detecting the ambient brightness.
PAGE 62
HDC-SDT750EB-VQT3B28_mst.book 62 ページ２０１０年８月２０日金曜日午後３時１５分 Self-timer This is for recording still pictures using the timer. Each time the icon is selected, the indication changes by one setting in the following order: Ø10 (Records after 10 seconds) # Ø2 (Records after 2 seconds) # setting cancelled ≥ When the button is pressed, a still picture is recorded after the Ø10 or Ø2 display and the recording lamp flashes for the time which has been set. After recording, the selftimer is cancelled.
PAGE 63
HDC-SDT750EB-VQT3B28_mst.book 63 ページ２０１０年８月２０日金曜日午後３時１５分 Guideline You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition. It will switch every time the icon is touched. # # # Setting cancelled ≥ It is possible to set from the quick menu. (l 37) ≥ The guidelines do not appear on the images actually recorded.
PAGE 64
HDC-SDT750EB-VQT3B28_mst.book 64 ページ２０１０年８月２０日 Advanced Recording (Advanced) 7 金曜日午後３時１５分 Recording functions of menus [SCENE MODE] When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ≥ Change the mode to or .
PAGE 65
HDC-SDT750EB-VQT3B28_mst.book 65 ページ２０１０年８月２０日 ≥ (Fireworks) j The shutter speed is 1/25. j Image may get washed out when recorded in bright surrounding. 金曜日午後３時１５分 ≥ (Night scenery/Night portrait) j The shutter speed is 1/2 or more in still picture recording mode. j It is recommended using a tripod. ≥ (Night portrait) j The flash is set to [ON]. [ZOOM MODE] Set the maximum zoom ratio for the motion picture recording mode. ≥ Change the mode to . : [RECORD SETUP] # [ZOOM MODE] # desired setting [Opt.
PAGE 66
HDC-SDT750EB-VQT3B28_mst.book 66 ページ２０１０年８月２０日金曜日午後３時１５分 [TIME LAPSE REC] A scene that moves slowly for long period of time is recorded frame by frame with an interval, and is recorded as a short time motion picture. A frame is recorded with a set recording interval. 25 frames will make up motion picture of 1 second. ≥ Change the mode to . ≥ Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 65) : [RECORD SETUP] # [TIME LAPSE REC] # desired setting ≥ It is possible to set from the quick menu.
PAGE 67
HDC-SDT750EB-VQT3B28_mst.book 67 ページ２０１０年８月２０日金曜日午後３時１５分 [DIGITAL CINEMA] Use this function to record an image with vivid colour, like an image on a movie film. ≥ Change the mode to . ≥ Switch to manual mode. (l 82) ≥ Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 65) ≥ Set [REC MODE] to [HA] or [HG]. (l 65) : [RECORD SETUP] # [DIGITAL CINEMA] # [ON] ≥ This function cannot be used in the intelligent auto mode or 1080/50p recording mode. ≥ The images may not appear smooth. [FACE RECOG.
PAGE 68
HDC-SDT750EB-VQT3B28_mst.book 68 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ Registering a face for face recognition [RECORD SETUP] # [FACE RECOG.] # [SET] # [SAVE] ≥ Up to a maximum of 6 people can be registered. 1 Align the person’s face with the guide. ≥ Take a picture of the persons face from the front, ensuring that their hair does not hide the outline of their face, their eyes or their eyebrows. 2 Touch [REC] or press the button fully. ≥ Touch [ENTER].
PAGE 69
HDC-SDT750EB-VQT3B28_mst.book 69 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ Changing the information of a registered person 1 Select the menu. [RECORD SETUP] # [FACE RECOG.] # [SET] # [EDIT] 2 Touch the desired item to enter the setting. ≥ Up to 3 face shots can be registered. To additionally register or to change/delete the registered face shots, touch or the face shot.
PAGE 70
HDC-SDT750EB-VQT3B28_mst.book 70 ページ２０１０年８月２０日金曜日午後３時１５分 [NAME DISPLAY] When a registered person is detected by face recognition during recording, the name registered for that person is displayed. ≥ Change the mode to or . : [RECORD SETUP] # [NAME DISPLAY] # desired number [OFF]/[1]/[2]/[3] ≥ Displayed name will disappear after a while. ≥ It is displayed according to the registration order setting from the first person. ≥ This function is not displayed during face-to-face recording or playback mode.
PAGE 71
HDC-SDT750EB-VQT3B28_mst.book 71 ページ２０１０年８月２０日金曜日午後３時１５分 [AUTO SLOW SHTR (2D)] You can record bright pictures even in dark places by slowing the shutter speed. ≥ Change the mode to . ≥ Switch to manual mode. (l 82) : [RECORD SETUP] # [AUTO SLOW SHTR (2D)] # [ON] ≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness. ≥ This function cannot be used when using the 3D Conversion Lens. ≥ This function cannot be used in still picture recording mode.
PAGE 72
HDC-SDT750EB-VQT3B28_mst.book 72 ページ２０１０年８月２０日金曜日午後３時１５分 [Digital Cinema Colour] Recording motion pictures with more vivid colours, using x.v.Colour™ technology. ≥ Change the mode to . ≥ Switch to manual mode. (l 82) : [RECORD SETUP] # [Digital Cinema Colour] # [ON] ≥ For more realistic colours, use an HDMI mini cable with a TV that supports the x.v.Colour™. ≥ When connecting this unit to a TV with the AV multi cable, the TV cannot detect the digital cinema colour setting on this unit automatically.
PAGE 73
HDC-SDT750EB-VQT3B28_mst.book 73 ページ２０１０年８月２０日金曜日午後３時１５分 [WIND NOISE CANCELLER] This will reduce the wind noise coming into the built-in microphones while maintaining the realism. ≥ Change the mode to . ≥ Switch to manual mode. (l 82) : [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON] ≥ This function’s default setting is [ON]. ≥ When switching to intelligent auto mode, [WIND NOISE CANCELLER] is set to [ON], and the setting cannot be changed.
PAGE 74
HDC-SDT750EB-VQT3B28_mst.book 74 ページ２０１０年８月２０日金曜日午後３時１５分 [MIC LEVEL] When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted. ≥ Change the mode to . ≥ Switch to manual mode. (l 82) 1 Select the menu. : [RECORD SETUP] # [MIC LEVEL] # desired setting [AUTO]: [SETr AGC is activated, and the recording level is adjusted automatically. ]/[SET]: The desired recording level can be set.
PAGE 75
HDC-SDT750EB-VQT3B28_mst.book 75 ページ２０１０年８月２０日金曜日午後３時１５分 [BASS SETTING] Change the lower setting of the built-in microphone according to your choice. ≥ Change the mode to . ≥ Switch to manual mode. (l 82) : [RECORD SETUP] # [BASS SETTING] # desired setting [0dB]/[+3dB]/[+6dB]/[LOWCUT] ≥ Normally set to [0dB]. ≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level. [PICTURE ADJUST] Adjust the quality of the image while recording.
PAGE 76
HDC-SDT750EB-VQT3B28_mst.book 76 ページ２０１０年８月２０日金曜日午後３時１５分 [ZEBRA] Parts where white saturation (colour saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). ≥ Change the mode to or . ≥ Switch to manual mode. (l 82) : [RECORD SETUP] # [ZEBRA] # [ON] ≥ It is possible to set from the quick menu in manual mode.
PAGE 77
HDC-SDT750EB-VQT3B28_mst.book 77 ページ２０１０年８月２０日金曜日午後３時１５分 [HISTOGRAM] A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is displayed. It is possible to determine the exposure of the whole image by looking at the distribution in the graph. Adjust the brightness using [IRIS]. (l 84) ≥ Change the mode to or . ≥ Switch to manual mode. (l 82) : [RECORD SETUP] # [HISTOGRAM] # desired setting ≥ It is possible to set from the quick menu in manual mode.
PAGE 78
HDC-SDT750EB-VQT3B28_mst.book 78 ページ２０１０年８月２０日金曜日午後３時１５分 [PICTURE SIZE] The higher the number of pixels, the higher the clarity of the picture when printing. ≥ Change the mode to . : [PICTURE] # [PICTURE SIZE] # desired setting ≥ It is possible to set from the quick menu. (l 37) ≥ The number of recording pixels that can be set changes depending on selected screen aspect ratio. (l 79) ∫ Picture size and Maximum zoom ratio Picture size Aspect ratio Extra optical zoom (l 47) –* 12.2M 4032k3024 7.
PAGE 79
HDC-SDT750EB-VQT3B28_mst.book 79 ページ２０１０年８月２０日金曜日午後３時１５分 [QUALITY] Selecting the picture quality. ≥ Change the mode to or . : [PICTURE] # [QUALITY] # desired setting : : Still pictures with a high picture quality are recorded. Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality. [ASPECT RATIO] This allows you to select the aspect ratio of the pictures to suit printing or the playback method. ≥ Change the mode to .
PAGE 80
HDC-SDT750EB-VQT3B28_mst.book 80 ページ２０１０年８月２０日金曜日午後３時１５分 [HI-SPEED BURST] Recording is done continuously at the rate of 50 still pictures per second. Use this function to record an object with fast movement. ≥ Change the mode to . 1 Select the menu. : [PICTURE] # [HI-SPEED BURST] # desired setting [OFF]: Cancel the setting. [50 Frames/sec]: 180 still pictures are recorded continuously at the rate of 50 per second. The picture size is 2.1 M (1920k1080). 2 Press the Touch [Record] or [Delete].
PAGE 81
HDC-SDT750EB-VQT3B28_mst.book 81 ページ２０１０年８月２０日金曜日午後３時１５分 [AF ASSIST LAMP] Illuminating the subject makes it easier for the camera to focus when recording in low light conditions that make focusing difficult. ≥ Change the mode to . ≥ Switch to manual mode. (l 82) : [PICTURE] # [AF ASSIST LAMP] # [AUTO] ≥ The available distance of the AF assist lamp is approx. 1.5 m.
PAGE 82
HDC-SDT750EB-VQT3B28_mst.book 82 ページ２０１０年８月２０日 Advanced 8 Recording (Advanced) 金曜日午後３時１５分 Manual recording The operation sequence differs for the LCD monitor and viewfinder. ¬ Change the mode to or . (The manual focus, white balance, shutter speed, brightness (Iris and Gain) settings are retained when you change between motion picture recording mode and still picture recording mode) Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual mode.
PAGE 83
HDC-SDT750EB-VQT3B28_mst.book 83 ページ２０１０年８月２０日金曜日午後３時１５分 White balance The automatic white balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ≥ Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual mode. (l 82) ≥ For how to perform the settings when using the viewfinder, refer to page 82. 1 2 Touch [WB]. Touch / to select white balance mode.
PAGE 84
HDC-SDT750EB-VQT3B28_mst.book 84 ページ２０１０年８月２０日金曜日午後３時１５分 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual mode. (l 82) ≥ For how to perform the settings when using the viewfinder, refer to page 82. 1 2 Touch [SHTR] or [IRIS]. Touch / settings.
PAGE 85
HDC-SDT750EB-VQT3B28_mst.book 85 ページ２０１０年８月２０日金曜日午後３時１５分 Recording with manual focus Perform focus adjustments using the multi manual ring. If auto focusing is difficult due to the conditions, then use manual focus. ¬ Change the mode to or . ≥ Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual mode. (l 82) ≥ For how to perform the settings when using the viewfinder, refer to page 82. /MANUAL CAMERA FUNCTION  A Rotate the multi manual ring to adjust the focus.
PAGE 86
HDC-SDT750EB-VQT3B28_mst.book 86 ページ２０１０年８月２０日 Advanced Playback (Advanced) 1 金曜日午後３時１５分 Playback Operations Motion picture playback using operation icon For details on the basic playback operations, refer to page 33. Playback operation Playback display Fast forward/ rewind playback During Playback Frame-by-frame playback The motion picture is advanced one frame at a time. 86 VQT3B28 Touch 5 during playback to fast forward. (Touch 6 to rewind.
PAGE 87
HDC-SDT750EB-VQT3B28_mst.book 87 ページ２０１０年８月２０日 Playback operation Playback display 金曜日午後３時１５分 Operating steps 1) During Playback Direct playback Touch 1 to display the direct playback bar A. 2) Touch or drag the direct playback bar. (l 23) ≥ The playback pauses temporarily and skips to the touched or dragged position. ≥ Playback will start by releasing your touching or dragging finger. ≥ Touch 2 to display the operation icon. ≥ Direct playback bar cannot be operated with the remote control.
PAGE 88
HDC-SDT750EB-VQT3B28_mst.book 88 ページ２０１０年８月２０日金曜日午後３時１５分 Highlight&Time frame index An image of one scene is displayed as a thumbnail at set search condition. Scene can be played back from any midway point of the scene you wish to see. ≥ Operate the zoom lever or the adjust zoom buttons to side and change over the thumbnail display to Highlight&Time frame index. (l 35) 1 Touch selected search condition. ≥ Next (previous) scene can be displayed by touching / . 2 Touch the desired search condition.
PAGE 89
HDC-SDT750EB-VQT3B28_mst.book 89 ページ２０１０年８月２０日金曜日午後３時１５分 Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. : [VIDEO SETUP] # [RESUME PLAY] # [ON] If playback of a motion picture is stopped, scene. appears on the thumbnail view of the stopped ≥ The memorised resume position is cleared if you turn off the unit or change the mode. (The setting of [RESUME PLAY] does not change.
PAGE 90
HDC-SDT750EB-VQT3B28_mst.book 90 ページ２０１０年８月２０日 Advanced Playback (Advanced) 2 金曜日午後３時１５分 Various playback functions Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. 1 Touch the date select icon.  A Date select icon 2 Touch the playback date. The scenes or the still pictures recorded on the date selected are displayed as thumbnails. 3 Touch the scene or the still picture to be played back.
PAGE 91
HDC-SDT750EB-VQT3B28_mst.book 91 ページ２０１０年８月２０日金曜日午後３時１５分 Face highlight playback/Highlight playback/Intelligent scene selection A part can be extracted and played back even when not set to normal playback. 1 Touch 2 Touch the desired playback mode. . [FACE HIGHLIGHT]: Giving priority to the parts with detected faces, the part that was recognised as clearly recorded is extracted from a long recording, and it can be played back in a short time with music added.
PAGE 92
HDC-SDT750EB-VQT3B28_mst.book 92 ページ２０１０年８月２０日金曜日午後３時１５分 ≥ Playing back of all the scenes returns if the unit is turned off or the mode is changed. (Highlight playback) ≥ Highlight playback cannot be performed with interval-recorded motion pictures. (l 66) (Intelligent scene selection) ≥ Up to 9 sections can be skipped for a single scene. ≥ When motion pictures are skipped, the image stops momentarily. ≥ Divided scene will not be skipped.
PAGE 93
HDC-SDT750EB-VQT3B28_mst.book 93 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ Playback time setting Touch the playback time. ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even play back if the part recognised as clearly recorded is short. ∫ Date setting Touch the playback date. ∫ Music setting 1 Touch your favourite music. ≥ When [NO MUSIC] is selected, the audio recorded at the time of shooting is played back.
PAGE 94
HDC-SDT750EB-VQT3B28_mst.book 94 ページ２０１０年８月２０日金曜日午後３時１５分 Changing the playback settings and playing back the slide show 1 Touch 2 Touch the desired item. . [DATE SETUP]: Select the date to be played back. [SLIDES INTERVAL]: Selects the interval between still pictures at playback. [MUSIC SELECT]: Select the music to be played on playback. 3 (When [DATE SETUP] is selected) Touch the playback date. (When [SLIDES INTERVAL] is selected) Touch the interval of playback for the slide show.
PAGE 95
HDC-SDT750EB-VQT3B28_mst.book 95 ページ２０１０年８月２０日 Advanced Editing 1 金曜日午後３時１５分 Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to . To delete by confirming images being played back 0h00m00s Press the button while scenes or still pictures to be deleted are being played back.
PAGE 96
HDC-SDT750EB-VQT3B28_mst.book 96 ページ２０１０年８月２０日金曜日午後３時１５分 ≥ You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] # [ALL SCENES] or [SELECT]. ≥ You can also delete still pictures by pressing the MENU button, selecting [PHOTO SETUP] # [DELETE] # [ALL SCENES] or [SELECT]. ≥ During face highlight playback, highlight playback, intelligent scene selection, or disc playback when connected to a DVD burner (optional), scenes/still pictures cannot be deleted.
PAGE 97
HDC-SDT750EB-VQT3B28_mst.book 97 ページ２０１０年８月２０日金曜日午後３時１５分 Dividing a scene to partially delete To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. ≥ Change the mode to and touch the play mode select icon to select [SD CARD]/ [1080/50p] or [SD CARD]/[AVCHD]. (l 33) 1 Select the menu. : [EDIT SCENE] # [DIVIDE] # [SET] 2 3 Touch the scene to be divided. Touch to set the dividing point.
PAGE 98
HDC-SDT750EB-VQT3B28_mst.book 98 ページ２０１０年８月２０日金曜日午後３時１５分 Deleting personal information Deletes face recognition information from scenes in which faces were recognised. ≥ Change the mode to and touch the play mode select icon to select [SD CARD]/ [1080/50p] or [SD CARD]/[AVCHD]. (l 33). 1 Select the menu. : [VIDEO SETUP] # [DELETE PERSONAL INFO] 2 Touch the desired scenes to be deleted personal information. appears at scenes for which faces were recognised.
PAGE 99
HDC-SDT750EB-VQT3B28_mst.book 99 ページ２０１０年８月２０日金曜日午後３時１５分 Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ≥ Change the mode to . 1 Select the menu. : [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT] 2 Touch the scene/still picture to be protected. ≥ When touched, the scene/still picture is selected and the indication appears on the thumbnail.
PAGE 100
HDC-SDT750EB-VQT3B28_mst.book 100 ページ２０１０年８月２０日 Advanced 2 Editing 金曜日午後３時１５分 DPOF setting You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Change the mode to and touch the play mode select icon to select [SD CARD]/[PICTURE].
PAGE 101
HDC-SDT750EB-VQT3B28_mst.book 101 ページ２０１０年８月２０日 Advanced With a TV 1 金曜日午後３時１５分 Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the AV multi cable (supplied) or HDMI mini cable (supplied/optional) and check the output settings.
PAGE 102
HDC-SDT750EB-VQT3B28_mst.book 102 ページ２０１０年８月２０日金曜日午後３時１５分 ≥ Check that the plugs are inserted as far as they go. ≥ Always use the supplied HDMI mini cable or a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other AV multi cables except the supplied one. ≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required.
PAGE 103
HDC-SDT750EB-VQT3B28_mst.book 103 ページ２０１０年８月２０日 ∫ To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen Change the menu setting to display the images correctly. (Check the TV setting.) [4:3] : [SETUP] # [TV ASPECT] # Example of images with a 16:9 aspect ratio on a regular TV (4:3) [TV ASPECT] setting [16:9] [4:3] ≥ If a wide-screen TV is connected, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.
PAGE 104
HDC-SDT750EB-VQT3B28_mst.book 104 ページ２０１０年８月２０日金曜日午後３時１５分 Connecting with a HDMI mini cable Select the desired method of HDMI output. : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p] ≥ [AUTO] determines the output resolution automatically based on information from the connected TV. If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [576p] which enables the images to be displayed on your TV.
PAGE 105
HDC-SDT750EB-VQT3B28_mst.book 105 ページ２０１０年８月２０日 Advanced With a TV 2 金曜日午後３時１５分 3D video playback Connect the unit to a 3D compatible television and play back scenes recorded in 3D to enjoy life-like and powerful 3D video. For the latest information on 3D compatible televisions and recorders that are capable of playing back 3D video recorded using the unit, see the support site below. http://panasonic.jp/support/global/cs/e_cam/index.
PAGE 106
HDC-SDT750EB-VQT3B28_mst.book 106 ページ２０１０年８月２０日金曜日午後３時１５分 ≥ You cannot play back 3D video on the LCD monitor of the unit. When you play back scenes recorded in 3D on the LCD monitor, they will be played back in 2D. ≥ You can also play back scenes recorded in 3D by date. Even if scenes are recorded on the same day, the unit will display the date separately when switching between 2D and 3D recordings.
PAGE 107
HDC-SDT750EB-VQT3B28_mst.book 107 ページ２０１０年８月２０日 Advanced With a TV 3 金曜日午後３時１５分 Playback using VIERA Link (HDAVI Control™) What is the VIERA Link? ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable for automatic linked operations. (Not all operations are possible.
PAGE 108
HDC-SDT750EB-VQT3B28_mst.book 108 ページ２０１０年８月２０日 3 金曜日午後３時１５分 Operate with the remote control for the TV. 1) 2)     1) Press the button up, down, left or right to select a scene or still picture to be played back, and then press the button in the centre to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
PAGE 109
HDC-SDT750EB-VQT3B28_mst.book 109 ページ２０１０年８月２０日 Copy/Dubbing With this unit/other products 1 金曜日午後３時１５分 Connecting a DVD burner to copy to/play back a disc Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner (optional) to this unit using a Mini AB USB Connection Cable (supplied with DVD burner). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
PAGE 110
HDC-SDT750EB-VQT3B28_mst.book 110 ページ２０１０年８月２０日 1 金曜日午後３時１５分 Connect the AC adaptor (supplied with DVD burner) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. 2 3 Connect this unit to the AC adaptor and change the mode to Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with DVD burner). A Mini AB USB Connection Cable (supplied with DVD burner) B DVD burner (optional) ≥ Insert the plugs as far as they will go.
PAGE 111
HDC-SDT750EB-VQT3B28_mst.book 111 ページ２０１０年８月２０日金曜日午後３時１５分 Copying to discs ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ You cannot copy motion pictures together with still pictures or motion pictures in a different picture quality (AVCHD picture quality and conventional normal picture quality) to the same disc. 1 2 3 Connect this unit to the DVD burner to prepare for copying. (l 110) Touch [BURN DISC].
PAGE 112
HDC-SDT750EB-VQT3B28_mst.book 112 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ About recording formats when copying motion pictures [AVCHD] ([HA]/[HG]/[HX]/[HE]): Copying scenes of 1080/50p picture quality The scenes recorded in 1080/50p by this unit will be copied after converting to AVCHD picture quality. ≥ When copying scenes recorded in 1080/50p, select the recording picture quality ([HA]/ [HG]/[HX]/[HE]).
PAGE 113
HDC-SDT750EB-VQT3B28_mst.book 113 ページ２０１０年８月２０日金曜日午後３時１５分 Approximate time for copying to a disc To copy motion pictures to the full capacity of a disc Disc type Copy time [AVCHD] DVD-RAM Approx. 50 min to 1 h 20 min DVD-RW*/ +RW* Approx. 35 min to 1 h 15 min DVD-R*/+R* Approx. 15 min to 45 min [Standard] ([XP]) [Standard] ([SP]) Approx. 1 h 30 min to 2 h 30 min Approx.
PAGE 114
HDC-SDT750EB-VQT3B28_mst.book 114 ページ２０１０年８月２０日金曜日午後３時１５分 ≥ The disc that was copied to can be played back by connecting this unit and a DVD burner. ≥ Do not turn off this unit or the DVD burner or disconnect the Mini AB USB Connection Cable while copying. Also, do not shake this unit or the DVD burner. ≥ It is impossible to stop copying halfway. ≥ The order in which the scenes were copied cannot be changed. ≥ Data that has been recorded on another device may not be copied.
PAGE 115
HDC-SDT750EB-VQT3B28_mst.book 115 ページ２０１０年８月２０日金曜日午後３時１５分 Managing the copied disc ≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 110) ∫ Formatting discs This is for initializing DVD-RAM, DVD-RW and +RW discs. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Back up important data on a PC etc. : [DISC SETUP] # [FORMAT DISC] ≥ When formatting is complete, touch [EXIT] to exit the message screen.
PAGE 116
HDC-SDT750EB-VQT3B28_mst.book 116 ページ２０１０年８月２０日 Copy/Dubbing With this unit/other products 2 金曜日午後３時１５分 Dubbing with a Blu-ray disc recorder, video, etc. Dubbing in high-definition picture quality You can dub using a Panasonic Blu-ray disc recorder or high-definition (AVCHD) compatible DVD recorder. Depending on the recorders or the media to be copied to, you may not be able to copy in high-definition (AVCHD) picture quality. For further details, see the operating instructions of your recorder.
PAGE 117
HDC-SDT750EB-VQT3B28_mst.book 117 ページ２０１０年８月２０日 2 金曜日午後３時１５分 Touch [RECORDER] on the screen of this unit. ≥ When you select an option other than [RECORDER], reconnect the USB cable. ≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on. 3 Dubbing through operations on the Blu-ray disc recorder or highdefinition (AVCHD) compatible DVD recorder.
PAGE 118
HDC-SDT750EB-VQT3B28_mst.book 118 ページ２０１０年８月２０日金曜日午後３時１５分 Dubbing in standard picture quality Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to. ≥ The channel set will differ depending on the terminal to which the unit is connected.
PAGE 119
HDC-SDT750EB-VQT3B28_mst.book 119 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ Dubbing scenes recorded in 3D Copying unaltered as 3D video When [3D PLAYBACK] is [3D], the 3D video is recorded in side-by-side format. : [SETUP] # [3D PLAYBACK] # [3D] ≥ If the dubbed video does not change to 3D video, make the necessary settings on the TV. (For further details, please read the operating instructions for the TV.) Copying after conversion to 2D video Set [3D PLAYBACK] to [2D].
PAGE 120
HDC-SDT750EB-VQT3B28_mst.book 120 ページ２０１０年８月２０日 With a PC Before using 1 金曜日午後３時１５分 What you can do with a PC HD Writer AE 2.6T You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs (BD), DVD discs or SD cards using HD Writer AE 2.6T, the software installed in the supplied CD-ROM. Refer to the operating instructions of HD Writer AE 2.6T (PDF file) for details on how to use it.
PAGE 121
HDC-SDT750EB-VQT3B28_mst.book 121 ページ２０１０年８月２０日 Available function Copying data to a PC ≥ Scenes recorded in 3D will be copied unaltered as 3D video. Copying in BD/AVCHD format ≥ Scenes recorded in 3D will be copied unaltered as 3D video. Data type Motion picture and still picture Copying in DVD-Video format: ≥ Converted to conventional standard quality (MPEG2 format). ≥ Scenes recorded in 3D will be converted to 2D video when copied.
PAGE 122
HDC-SDT750EB-VQT3B28_mst.book 122 ページ２０１０年８月２０日 Available function Data type Playing back on a PC Still picture Copying still pictures to a PC (l 131) 金曜日午後３時１５分 Software required HD Writer AE 2.6T or Standard Windows picture viewer or a commercially available picture viewer Windows Explorer Refer to page 133 if using a Mac. Important Notice ≥ When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.
PAGE 123
HDC-SDT750EB-VQT3B28_mst.book 123 ページ２０１０年８月２０日金曜日午後３時１５分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
PAGE 124
HDC-SDT750EB-VQT3B28_mst.book 124 ページ２０１０年８月２０日 With a PC Before using 2 金曜日午後３時１５分 Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible BD/DVD writer drive and media are necessary for writing to a BD/DVD.) ≥ Operation is not guaranteed in the following cases.
PAGE 125
HDC-SDT750EB-VQT3B28_mst.book 125 ページ２０１０年８月２０日金曜日午後３時１５分 Display High Colour (16 bit) or more (32 bit or more recommended) Desktop resolution of 1024k768 pixels or more (1280k1024 pixels or more recommended) Windows Vista/Windows 7: DirectX 9.0c compatible video card (DirectX 10 recommended) Windows XP: DirectX 9.
PAGE 126
HDC-SDT750EB-VQT3B28_mst.
PAGE 127
HDC-SDT750EB-VQT3B28_mst.book 127 ページ２０１０年８月２０日 With a PC Setup 1 金曜日午後３時１５分 Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed.
PAGE 128
HDC-SDT750EB-VQT3B28_mst.book 128 ページ２０１０年８月２０日 7 8 金曜日午後３時１５分 When installation is complete, some notes will appear. Check the contents, then close the window. Select [Yes, I want to restart my computer now.], then click [Finish]. The PC must be rebooted for the application to work. ∫ Uninstalling HD Writer AE 2.6T Follow the steps below to uninstall any software applications that you no longer require. 1 Select [Start] # [Control Panel] # [Uninstall a Program]. 2 Select [HD Writer AE 2.
PAGE 129
HDC-SDT750EB-VQT3B28_mst.book 129 ページ２０１０年８月２０日 With a PC Setup 2 金曜日午後３時１５分 Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 Connect this unit to the AC adaptor. ≥ It is possible to use it connected to the PC with the batteries only. Use the AC adaptor to free you from worrying about the battery running down. ≥ Connect with the AC adaptor when using the Conversion assist function.
PAGE 130
HDC-SDT750EB-VQT3B28_mst.book 130 ページ２０１０年８月２０日金曜日午後３時１５分 ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) ≥ When the unit is connected to a PC, it cannot be turned off. Disconnect the USB cable, before turning this unit off. ≥ Do not disconnect the USB cable or the AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen.
PAGE 131
HDC-SDT750EB-VQT3B28_mst.book 131 ページ２０１０年８月２０日金曜日午後３時１５分 About the PC display When the unit is connected to a PC, it is recognised as an external drive. ≥ Removable disk (Example: ) is displayed in [Computer]. We recommend using HD Writer AE 2.6T to copy motion picture data. Using Windows Explorer or other programmes on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable with HD Writer AE 2.6T.
PAGE 132
HDC-SDT750EB-VQT3B28_mst.book 132 ページ２０１０年８月２０日 With a PC Using with a PC 1 金曜日午後３時１５分 Starting HD Writer AE 2.6T ≥ When using HD Writer AE 2.6T on Windows XP, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer AE 2.
PAGE 133
HDC-SDT750EB-VQT3B28_mst.book 133 ページ２０１０年８月２０日 With a PC Using with a PC 2 金曜日午後３時１５分 If using Mac ≥ HD Writer AE 2.6T is not available for Mac. ≥ iMovie’09 supported. For details about iMovie’09, please contact Apple Inc. ≥ 1080/50p scenes cannot be imported to a Mac. ≥ Since iMovie’09 is not compatible with 1080/50p, it cannot acquire the scenes recorded in 1080/50p. Record in normal recording mode when importing to Mac. ≥ Scenes recorded in 3D are not supported by iMovie’09.
PAGE 134
HDC-SDT750EB-VQT3B28_mst.book 134 ページ２０１０年８月２０日 Others 1 Indications (White) Card recording possible status (Green) Recognising the card Motion picture recording mode MF 0h00m00s HG1920 1h30m R 1h20m PRE-REC 1/100 OPEN 0dB +6dB ¥/; (Red) Recording ; (Green) Recording pause PRE-REC (l 59) PRE-REC Interval recording (l 66) 99%↑ 99 Manual mode (l 82) MNL 12:34 15. 11. 2010 F / / / / MF MEGA A 1h30m 14.2M R 3000 1/100 OPEN 0dB / / Shutter speed (l 84) OPEN/F2.
PAGE 135
HDC-SDT750EB-VQT3B28_mst.book 135 ページ２０１０年８月２０日 Zoom microphone (l 73) Focus microphone (l 73) Stereo microphone (l 73) Wind noise canceller (l 73) +3dB/ +6dB / Bass setting (l 75) / Smile shot (l 60) Microphone level (l 74) Backlight compensation (l 62) 1/;/5/ /6/ D/E/;1/2; / F Playback time (l 33) No.
PAGE 136
HDC-SDT750EB-VQT3B28_mst.book 136 ページ２０１０年８月２０日 ∫ Indication of connection to other devices Accessing the card (l 130) ∫ Confirmatory indications –– (Time display) The built-in battery is low. (l 25) Warning for face-to-face recording (l 24) SD card is not inserted or is non-compatible.
PAGE 137
HDC-SDT750EB-VQT3B28_mst.book 137 ページ２０１０年８月２０日 Others Indications 2 金曜日午後３時１５分 Messages Major confirmation/error messages to be indicated on the screen in text. CHECK CARD. This card is not compatible or it cannot be recognised by the unit. If this message appears even though motion pictures and still pictures are recorded on an SD card, the card may be unstable. Reinsert the SD card, then turn the unit off and then on again. THIS BATTERY CANNOT BE USED.
PAGE 138
HDC-SDT750EB-VQT3B28_mst.book 138 ページ２０１０年８月２０日金曜日午後３時１５分 About recovery If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.) SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. (IRREPARABLE SCENES WILL BE DELETED.) ≥ The above message is displayed when abnormal management information is detected when the scenes are displayed in thumbnail.
PAGE 139
HDC-SDT750EB-VQT3B28_mst.book 139 ページ２０１０年８月２０日金曜日午後３時１５分 Others Troubleshooting Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. Check points ≥ Charge the battery again to ensure it is sufficiently charged. (l 14) ≥ In cold places, the battery using time becomes shorter. ≥ The battery has a limited life. If the operating time is still too short even after the battery is fully charged, the battery has worn out and needs to be replaced.
PAGE 140
HDC-SDT750EB-VQT3B28_mst.book 140 ページ２０１０年８月２０日 Problem This unit cannot be operated though it is turned on. This unit does not operate normally. 金曜日午後３時１５分 Check points ≥ Remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the unit again. (Conducting the above operation while the media is being accessed may damage the data on the media.
PAGE 141
HDC-SDT750EB-VQT3B28_mst.book 141 ページ２０１０年８月２０日 Problem 金曜日午後３時１５分 Check points Colour balance of images is strange when recording in a place such as a gymnasium. ≥ In a place with multiple light sources, such as a gymnasium or a hall, set the white balance setting to (Indoor mode 2). If you cannot record clearly with the (Indoor mode 2), set it to (Manual adjustment mode). (l 83) Any scenes/still pictures cannot be played back.
PAGE 142
HDC-SDT750EB-VQT3B28_mst.book 142 ページ２０１０年８月２０日金曜日午後３時１５分 Problem Check points Colour or brightness of the image changes, or you may see horizontal bars in the image. ≥ Colour or brightness of the image may change, or you may see horizontal bars in the image when the object is recorded under fluorescent light, mercury light or sodium light, etc., but this is not a malfunction.
PAGE 143
HDC-SDT750EB-VQT3B28_mst.book 143 ページ２０１０年８月２０日 Problem VIERA Link does not work. 金曜日午後３時１５分 Check points [Setting on this unit] ≥ Connect with a HDMI mini cable. (l 107) ≥ Press the MENU button, then touch [SETUP] # [VIERA Link] # [ON]. (l 107) ≥ Turn the unit off and then back on again. [Setting on other devices] ≥ If the TV input does not switch automatically, switch the input using the TV remote control. ≥ Check the VIERA Link setting on the connected device.
PAGE 144
HDC-SDT750EB-VQT3B28_mst.book 144 ページ２０１０年８月２０日金曜日午後３時１５分 Problem Check points Cannot see the PDF operating instructions for HD Writer AE 2.6T. ≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the PDF operating instructions for HD Writer AE 2.6T. Cannot copy scenes on the SD card by connecting to other equipment with the USB cable. ≥ Other equipment might have not recognised the SD card. Unplug the USB cable once, and reconnect it.
PAGE 145
HDC-SDT750EB-VQT3B28_mst.book 145 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit.
PAGE 146
HDC-SDT750EB-VQT3B28_mst.book 146 ページ２０１０年８月２０日金曜日午後３時１５分 Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
PAGE 147
HDC-SDT750EB-VQT3B28_mst.book 147 ページ２０１０年８月２０日 Do not use the unit for surveillance purposes or other business uses. ≥ This unit was designed for consumer intermittent use. It was not intended for continuous use, or for any industrial or commercial application resulting in prolonged use. ≥ In certain situations, continuous use could cause the unit to overheat and cause a malfunction. Such use is strongly discouraged.
PAGE 148
HDC-SDT750EB-VQT3B28_mst.book 148 ページ２０１０年８月２０日 record for. Cold places such as a ski resort can shorten the period which you can record for. If you drop the battery accidentally, check to see if the terminals are damaged. ≥ Attaching a battery with damaged terminals can damage the unit or AC adaptor. Do not throw old battery into fire. ≥ Heating a battery or throwing it into a fire may result in an explosion.
PAGE 149
HDC-SDT750EB-VQT3B28_mst.book 149 ページ２０１０年８月２０日 About the 3D Conversion Lens ≥ Image may be affected when the surface of the protective glass is contaminated by water, oil, fingerprints, etc. Wipe the surface of the protective glass gently with a dry soft cloth before and after the recording. ≥ Remove the 3D Conversion Lens from the unit and place it in the lens storage bag when carrying. ≥ Do not hold the 3D Conversion Lens when the 3D Conversion Lens is attached to the unit.
PAGE 150
HDC-SDT750EB-VQT3B28_mst.book 150 ページ２０１０年８月２０日 When viewing 3D video, we recommend taking a break every 30 to 60 minutes. ≥ Viewing for extended periods may cause eye-fatigue. Short-sighted or long-sighted persons, those with differences in the sight of their right and left eyes, and those with astigmatism are advised to correct their vision by wearing glasses etc. Stop viewing if you can clearly see a double image while viewing 3D video.
PAGE 151
HDC-SDT750EB-VQT3B28_mst.book 151 ページ２０１０年８月２０日 LCD monitor/viewfinder ≥ When the LCD monitor gets dirty, wipe it with a soft cloth, such as eye glass cleaner. ≥ Do not touch the LCD monitor with your finger nails, or rub or press with strong force. ≥ It may become hard to see or hard to recognise the touch when the LCD protection sheet is affixed. ≥ In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with a soft cloth, such as eye glass cleaner.
PAGE 152
HDC-SDT750EB-VQT3B28_mst.book 152 ページ２０１０年８月２０日 About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥ When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
PAGE 153
HDC-SDT750EB-VQT3B28_mst.book 153 ページ２０１０年８月２０日金曜日午後３時１５分 Others About copyright ∫ Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. ∫ Licenses ≥ SDXC Logo is a trademark of SD-3C, LLC. ≥ “AVCHD” and the “AVCHD” Logo are trademarks of Panasonic Corporation and Sony Corporation.
PAGE 154
HDC-SDT750EB-VQT3B28_mst.book 154 ページ２０１０年８月２０日金曜日午後３時１５分 Others Recording modes/approximate recordable time ≥ SD cards are only mentioned with their main memory size. The stated times are the approximate recordable times for continuous recording.
PAGE 155
HDC-SDT750EB-VQT3B28_mst.book 155 ページ２０１０年８月２０日金曜日午後３時１５分 Others Approximate number of recordable pictures ≥ SD cards are only mentioned with their main memory size. The stated number is the approximate number of recordable pictures. (In still picture recording mode) Aspect ratio Picture size 4:3 12.2M 4032k3024 7.7M 3200k2400 4.9M 2560k1920 0.
PAGE 156
HDC-SDT750EB-VQT3B28_mst.book 156 ページ２０１０年８月２０日 Aspect ratio Picture size Picture quality 512 MB 1 GB 2 GB 4 GB SD card 8 GB 16 GB 32 GB 48 GB 64 GB 金曜日午後３時１５分 16:9 13.3M 4864k2736 8.3 M 3840k2160 5.
PAGE 157
HDC-SDT750EB-VQT3B28_mst.book 157 ページ２０１０年８月２０日金曜日午後３時１５分 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording; 6.0 W Signal system: 1080/50p, 1080/50i Recording format: 1080/50p; Original format HA/HG/HX/HE; AVCHD format compliant Image sensor: 1/4.1 type (1/4.
PAGE 158
HDC-SDT750EB-VQT3B28_mst.book 158 ページ２０１０年８月２０日金曜日午後３時１５分 Viewfinder: 0.69 cm (0.27z) wide EVF (Approx. 123 K dots) Microphone: 5.1 channel surround microphone (with a zoom microphone/focus microphone function) Speaker: 1 round speaker, dynamic type White balance adjustment: Auto tracking white balance system Standard illumination: 1,400 lx Minimum required illumination: Approx. 1.6 lx (1/25 with low light mode in the scene mode) Approx.
PAGE 159
HDC-SDT750EB-VQT3B28_mst.book 159 ページ２０１０年８月２０日金曜日午後３時１５分 USB: Reader function (No copyright protection support) Hi-Speed USB (USB 2.0), USB terminal Type Mini AB USB host function (for DVD burner) Flash: Available range; Approx. 1.0 m to 2.5 m Dimensions: 66 mm (W)k69 mm (H)k138 mm (D) (excluding projecting parts) Mass: Approx. 375 g [without battery (supplied) and an SD card (optional)] Mass in operation: Approx.
PAGE 160
HDC-SDT750EB-VQT3B28_mst.book 160 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ 3D Conversion Lens Dimensions: 78 mm (W)k59 mm (H)k97 mm (D) Mass: Approx. 195 g Lens (when attached to the unit): F3.2 (f = 2.5 mm) 35 mm equivalent; 58 mm Minimum recording distance; approx. 1.2 m Stereo base: 12.4 mm Minimum illumination: Approx.
PAGE 161
HDC-SDT750EB-VQT3B28_mst.book 161 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ Still pictures Recording media: SD Memory Card (FAT12 and FAT16 system compliant) SDHC Memory Card (FAT32 system compliant) SDXC Memory Card (exFAT system compliant) Refer to page 19 for details on SD cards usable in this unit. Compression: JPEG (Design rule for Camera File system, based on Exif 2.
PAGE 162
HDC-SDT750EB-VQT3B28_mst.book 162 ページ２０１０年８月２０日 AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 19 W DC 9.3 V, 1.2 A (Unit operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions: 92 mm (W)k33 mm (H)k61 mm (D) Mass: Approx. 115 g Specifications may change without prior notice.
PAGE 163
HDC-SDT750EB-VQT3B28_mst.book 163 ページ２０１０年８月２０日金曜日午後３時１５分 Others Optional accessories Product numbers correct as of Aug. 2010. These may be subject to change. Some optional accessories may not be available in some countries.
PAGE 164
HDC-SDT750EB-VQT3B28_mst.book 164 ページ２０１０年８月２０日 ∫ Attaching the battery pack holder kit To use the VW-VBG6 for this unit, the battery pack holder kit/VW-VH04 (optional) is required.  金曜日午後３時１５分 ∫ Attaching the optional accessories on the shoe adaptor The video DC light/VW-LDC103E (optional) etc. can be mounted on the shoe adaptor (supplied). 1 Open the shoe adaptor cover. 2 Attach the shoe adaptor to this unit.   3 Attach the video DC light to this unit.
PAGE 165
HDC-SDT750EB-VQT3B28_mst.book 165 ページ２０１０年８月２０日金曜日午後３時１５分 ∫ Attaching the conversion lens/ filter kit Attach the wide conversion lens (VW-W4607H; optional), the wide end conversion lens (VW-WE08H; optional), ND filter or MC protector of the Filter kit (VW-LF46NE; optional) in front of the lens. ≥ It is not possible to attach it to the front of the lens hood. (l 26) ≥ You will not be able to use the flash. Set the flash setting to (OFF). (l 61) Be careful about the following.
PAGE 166
HDC-SDT750EB-VQT3B28_mst.book 166 ページ２０１０年８月２０日金曜日午後３時１５分 Index ∫ Numerics 1080/50p recording . . . . . . . . . . . . . . . 51 3D Conversion Lens . . . . 13, 52, 56, 149 3D playback/viewing . . . . . . . . . 105, 149 3D recording . . . . . . . . . . . . . . . . 52, 149 5.1 channel . . . . . . . . . . . . . . . . . . . . 104 ∫A AC adaptor . . . . . . . . . . . . . . 14, 18, 148 AF assist lamp . . . . . . . . . . . . . . . . . . . 81 AF/AE tracking . . . . . . . . . . . . . . . . . . 50 Alert sound . .
PAGE 167
HDC-SDT750EB-VQT3B28_mst.book 167 ページ２０１０年８月２０日 Lens hood . . . . . . . . . . . . . . . . . . . . . . 26 Luminance . . . . . . . . . . . . . . . . . . . . . 76 ∫M Manual focus . . . . . . . . . . . . . . . . . . . . 85 Manual recording . . . . . . . . . . . . . . . . . 82 Menu . . . . . . . . . . . . . . . . . . . . . . . . . 36 MF assist . . . . . . . . . . . . . . . . . . . . . . 85 Microphone level . . . . . . . . . . . . . . . . . 74 Microphone setup . . . . . . . . . . . . . . . .
PAGE 168
HDC-SDT750EB-VQT3B28_mst.book 168 ページ２０１０年８月２０日金曜日午後３時１５分 EU Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany B VQT3B28 F0810KB0 ( 600 ) Panasonic Corporation Web site: http://panasonic.