Operating instructions

- 63 -

This will reduce the wind noise coming into the built-in microphones while maintaining the

realism.

≥ Switch to manual mode. (l 71)

≥ This function’s default setting is [ON].

≥ When switching to intelligent auto mode, [WIND NOISE CANCELLER] is set to [ON], and

the setting cannot be changed.

≥ You may not see the full effect depending on the recording conditions.

Directivity of the microphone is interlocked with the zoom operation. Sounds near the front of

the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are

recorded more realistically if you zoom out (wide angle).

≥ Switch to manual mode. (l 71)

[WIND NOISE CANCELLER]

: [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON]

[ZOOM MIC]

: [RECORD SETUP] # [ZOOM MIC] # [ON]