HDC-SD800EB_eng.book 1 ページ 2010年12月24日 金曜日 午前9時9分 Operating Instructions High Definition Video Camera Model No. HDC-SD800 Before use, please read these instructions completely. Model number suffix “EB” denotes UK model.
HDC-SD800EB_eng.book 2 ページ 2010年12月24日 金曜日 午前9時9分 Information for Your Safety Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic High Definition Video Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your High Definition Video Camera may look somewhat different from those shown in the illustrations in these Operating Instructions.
HDC-SD800EB_eng.book 3 ページ 2010年12月24日 How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1. Open the fuse cover with a screwdriver. 2. Replace the fuse and close or attach the fuse cover.
HDC-SD800EB_eng.book 4 ページ 2010年12月24日 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Warning Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth. If swallowed call your doctor.
HDC-SD800EB_eng.book 5 ページ 2010年12月24日 金曜日 午前9時9分 ∫ About the recording format for recording motion pictures You can select from AVCHD, 1080/50p or iFrame recording formats to record motion pictures using this unit. (l 49, 60) AVCHD: You can record high definition quality images with this format. It is suitable for viewing on a large format TV or for saving to disc. 1080/50p: This is a 1080/50p (1920k1080/50 progressive) recording mode that can record in maximum quality*.
HDC-SD800EB_eng.book 6 ページ 2010年12月24日 ∫ Cards that you can use with this unit SD Memory Card, SDHC Memory Card and SDXC Memory Card ≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications. ≥ Refer to page 18 for more details on SD cards. ∫ For the purposes of these operating instructions ≥ SD Memory Card, SDHC Memory Card and SDXC Memory Card are referred to as the “SD card”.
午前9時9分 Basic Before recording ..................................... 25 Recording motion pictures ....................27 Recording still pictures .......................... 29 Recording still pictures in motion picture recording mode.......... 30 Intelligent auto mode.............................. 31 Motion picture/Still picture playback .... 33 Using the menu screen .......................... 36 Using the quick menu ....................... 37 Using the Setup Menu ............................
HDC-SD800EB_eng.book 8 ページ 2010年12月24日 Deleting scenes/still pictures ................ 92 Dividing a scene (AVCHD, 1080/50p) .......................... 93 Dividing a scene to partially delete (iFrame) ............................................ 94 Deleting personal information ........... 95 Protecting scenes/still pictures.......... 95 DPOF setting ........................................... 96 Watching Video/Pictures on your TV .... 97 Connecting with a HDMI mini cable...........................
HDC-SD800EB_eng.book 9 ページ 2010年12月24日 金曜日 午前9時9分 ∫ Sales and Support Information Customer Care Centre ≥ For customers within the UK: 0844 844 3852 ≥ For customers within Ireland: 01 289 8333 ≥ Visit our website for product information www.panasonic.co.uk. ≥ E-mail: customer.care@panasonic.co.
HDC-SD800EB_eng.book 10 ページ 2010年12月24日 金曜日 午前9時9分 Accessories Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of Dec. 2010. These may be subject to change.
HDC-SD800EB_eng.book 11 ページ 2010年12月24日 金曜日 午前9時9分 Preparation Parts identification and handling 1 2 3 4 1 2 34 5 6 7 8 9 10 11 13 Speaker Power button [ ] (l 20) Inlet (cooling fan) (l 25) Intelligent auto/Manual button [iA/MANUAL] (l 31, 76) 5 Optical image stabilizer button [ O.I.S.
HDC-SD800EB_eng.book 12 ページ 2010年12月24日 金曜日 午前9時9分 21 LCD monitor (Touch screen) (l 22) 21 ≥ It can open up to 90o. ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture. 22 Tripod receptacle ≥ If you attach a tripod which has 5.5 mm screw or larger, it may damage this unit.
HDC-SD800EB_eng.book 13 ページ 23 24 25 27 28 2010年12月24日 午前9時9分 23 Status indicator (l 20) 24 Photoshot button [ ] (l 29) 25 Zoom lever [W/T] (In motion picture recording mode or still picture recording mode) (l 47) Thumbnail display switch [ / ]/ Volume lever [sVOLr] (In playback mode) (l 34) 26 Internal microphones 27 Mode switch (l 21) 28 Recording start/stop button (l 27) 29 Shoulder strap fixture 30 Grip belt Adjust the length of the grip belt so that it fits your hand.
HDC-SD800EB_eng.book 14 ページ 2010年12月24日 金曜日 午前9時9分 Preparation Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBN130/VW-VBN260. ≥ The unit has a function for distinguishing batteries which can be used safely. The dedicated battery (VW-VBN130/VW-VBN260) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic.
HDC-SD800EB_eng.book 15 ページ 2010年12月24日 金曜日 午前9時9分 Charging the battery When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit. The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: ≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device.
HDC-SD800EB_eng.book 16 ページ 2010年12月24日 金曜日 午前9時9分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC/humidity: 60%RH Battery model number [Voltage/Capacity (minimum)] Supplied battery/ VW-VBN130 (optional) [7.2 V/1250 mAh] VW-VBN260 (optional) [7.
HDC-SD800EB_eng.book 17 ページ 2010年12月24日 金曜日 午前9時9分 ≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever etc. ≥ The batteries heat up after use or charging. This is not a malfunction. Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then will flash.
HDC-SD800EB_eng.book 18 ページ 2010年12月24日 金曜日 午前9時9分 Preparation Preparation of SD cards This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC memory card with other equipment, check the equipment is compatible with these memory cards. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.
HDC-SD800EB_eng.book 19 ページ 2010年12月24日 金曜日 午前9時9分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 43) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Caution: Check that the access lamp has gone off. Access lamp [ACCESS] A ≥ When this unit is accessing the SD card, the access lamp lights up.
HDC-SD800EB_eng.book 20 ページ 2010年12月24日 金曜日 午前9時9分 Preparation Turning the unit on/off You can turn the unit on and off using the power button or by opening and closing the LCD monitor. A clicking sound is heard when the unit is shaken. ≥ This is the sound of the lens moving and is not a defect. This sound will no longer be heard when the unit is turned on and change the mode to or . Turning the unit on and off with the power button Press the power button to turn on the unit.
HDC-SD800EB_eng.book 21 ページ 2010年12月24日 金曜日 午前9時9分 ≥ The unit will not turn off while recording motion pictures even if the LCD monitor is closed. ≥ In the following cases, opening the LCD monitor does not turn on the unit. Press the power button to turn on the unit. j When the unit is purchased j When you have turned off the unit using the power button Preparation Selecting a mode Change the mode to recording or playback. Operate the mode switch to change the mode to , or .
HDC-SD800EB_eng.book 22 ページ 2010年12月24日 金曜日 午前9時9分 Preparation How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. ∫ Touch Touch and release the touch screen to select icon or picture. ≥ Touch the centre of the icon. ≥ Touching the touch screen will not operate while you are touching another part of the touch screen.
HDC-SD800EB_eng.book 23 ページ 2010年12月24日 金曜日 午前9時9分 About the touch menu Touch Touch (left side)/ (right side) of (left side)/ on the touch menu to switch the operation icons. (right side) of on the touch menu. ≥ It is also possible to switch the operation icons by sliding the touch menu right or left while touching it. A Touch menu T W Recording mode T FOCUS Playback mode Q. MENU WB W ALL SHTR IRIS MENU MENU B Touch these icons to switch pages upward or downward.
HDC-SD800EB_eng.book 24 ページ 2010年12月24日 金曜日 午前9時9分 Preparation Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. 1 Select the menu. (l 36) MENU 2 : [SETUP] # [CLOCK SET] Touch the date or time to be set, then set the desired value using . / A Displaying the World time setting (l 38): [HOME]/ [DESTINATION] ≥ The year can be set between 2000 and 2039.
HDC-SD800EB_eng.book 25 ページ 2010年12月24日 金曜日 午前9時9分 Basic Before recording ∫ Basic camera positioning 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use recording button icon A when holding the unit around your waist. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. ≥ When you are outdoors, record pictures with the sunlight behind you.
HDC-SD800EB_eng.book 26 ページ 2010年12月24日 金曜日 午前9時9分 ∫ To recording Yourself Rotate the LCD monitor towards the lens side. ≥ The image is horizontally flipped as if you see a mirror image. (However the image recorded is the same as a normal recording.) ≥ Only some indications will appear on the screen. When appears, return the direction of the LCD monitor to normal position and check the warning/alarm indication.
HDC-SD800EB_eng.book 27 ページ 2010年12月24日 金曜日 午前9時9分 Basic Recording motion pictures 1 2 3 Change the mode to . Open the LCD monitor. Press the recording start/stop button to start recording. T W A When you begin recording, ; changes to ¥. 4 Press the recording start/stop button again to pause recording. B You can also start or pause recording by touching the recording start/stop button icon. This icon functions in the same manner as the recording start/stop button.
HDC-SD800EB_eng.book 28 ページ 2010年12月24日 金曜日 午前9時9分 ≥ There are 3 recording formats that can be used with this unit: AVCHD that records high-definition motion pictures, 1080/50p that records motion pictures in maximum quality for this unit and iFrame that records motion pictures suitable for playback and editing on Mac (iMovie’11). To change the recording format, change the recording mode (l 60) or press and hold the 1080/50p button.
HDC-SD800EB_eng.book 29 ページ 2010年12月24日 金曜日 午前9時9分 Basic Recording still pictures 1 2 3 Change the mode to 4 Press the . Open the LCD monitor. Press the button halfway. (For auto focus only) button fully. Focus indication: A Focus indication ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful.
HDC-SD800EB_eng.book 30 ページ 2010年12月24日 金曜日 午前9時9分 ∫ About the screen indications in still picture recording : R3000: : 14.2M : MEGA : : : ß: ßj: : Still picture operation indicator (l 131) Remaining number of still pictures (Flashes in red when [0] appears.) Quality of still pictures (l 73) Size of still pictures (l 72) MEGA optical image stabilizer (l 29) Optical image stabilizer (l 48) AF assist lamp (l 75) Flash (l 56) Flash level (l 56) Red eye reduction (l 56) R3000 14.
HDC-SD800EB_eng.book 31 ページ 2010年12月24日 金曜日 午前9時9分 Basic Intelligent auto mode The following modes appropriate for the condition are set just by pointing the unit to what you want to record. /MANUAL Intelligent auto/Manual button Press this button to switch intelligent auto mode/manual mode. ≥ Please refer to page 76 about manual mode. Mode Scene Effect Portrait When the object is a person Faces are detected and focused automatically, and the brightness is adjusted so it is recorded clearly.
HDC-SD800EB_eng.book 32 ページ 2010年12月24日 金曜日 午前9時9分 ≥ Faces cannot be detected depending on the recording conditions, such as when faces are of certain sizes or at certain tilts or when digital zoom is used. ≥ [ZOOM MIC] is set to [OFF] in the intelligent auto mode. (l 68) ∫ Intelligent auto mode When switching to intelligent auto mode, the auto white balance and auto focus operate and automatically adjust the colour balance and focusing. Depending on the brightness of the subject etc.
HDC-SD800EB_eng.book 33 ページ 2010年12月24日 金曜日 午前9時9分 Basic Motion picture/Still picture playback 1 2 Change the mode to 3 Select the [VIDEO/PICTURE] you wish to play back. . Touch the play mode select icon A. (l 23) ALL ≥ Touch [ENTER]. 4 Touch the scene or the still picture to be played back. 1080/50p is displayed when [1080/50p] is touched, ALL is displayed when [AVCHD] is touched or is displayed when [iFrame] is touched in step 3.
HDC-SD800EB_eng.book 34 ページ 2010年12月24日 Motion picture playback 1/;: 6: 5: ∫: Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. 金曜日 午前9時9分 Still picture playback 1/;: 2;: ;1: ∫: Slide show (playback of the still pictures in numerical order) start/pause. Plays back the previous picture. Plays back the next picture. Stops the playback and shows the thumbnails.
HDC-SD800EB_eng.book 35 ページ 2010年12月24日 金曜日 午前9時9分 ≥ Sound will be heard only during normal playback. ≥ If pause play is continued for 5 minutes, the screen returns to the thumbnails. ≥ The elapsed time for playback indication will be reset to 0h00m00s each scene. ≥ When playing back iFrame scenes, the image will pause momentarily and the screen may turn black when the scenes are switching. Motion picture compatibility Please refer to page 49 about 1080/50p.
HDC-SD800EB_eng.book 36 ページ 2010年12月24日 金曜日 午前9時9分 Basic Using the menu screen ≥ Touch 1 (left side)/ (right side) of Touch [MENU]. on the touch menu to display MENU . (l 23) 4 Touch the desired item to enter the setting. 5 Touch [EXIT] to exit the menu setting. Q. MENU MENU 2 Touch the top menu A. ∫ About 3 Touch the submenu B. ≥ Next (previous) page can be displayed by touching / .
HDC-SD800EB_eng.book 37 ページ 2010年12月24日 金曜日 午前9時9分 Using the quick menu This allows quick setting of some of the menus. ≥ Touch (left side)/ (right side) of on the touch menu to display 1 Q. MENU . (l 23) Touch [Q.MENU]. The following menus can be set. Touch the desired menu. ≥ The items displayed differ depending on the position of the mode switch or settings. Icon 14.2M / 13.
HDC-SD800EB_eng.book 38 ページ 2010年12月24日 金曜日 午前9時9分 Basic Using the Setup Menu ≥ The items displayed differ depending on the position or settings of the mode switch. Select the menu. MENU : [SETUP] # desired setting [CLOCK SET] Please refer to page 24. [SET WORLD TIME] It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. 1 Touch [SET WORLD TIME]. ≥ If the clock is not set, adjust the clock to the current time.
HDC-SD800EB_eng.book 39 ページ 5 2010年12月24日 金曜日 午前9時9分 (Only when setting the region of your travel destination) Touch / to select your travel destination and touch [ENTER]. ≥ Touch [SUMMER TIME SET] to set daylight saving time. appears and the summer time setting is turned on. The travel destination time and time difference from the home region time are set forward by one hour. Touch [SUMMER TIME SET] again to return to the normal time setting. ≥ Close the setting by touching [EXIT].
HDC-SD800EB_eng.book 40 ページ [QUICK POWER ON] 2010年12月24日 金曜日 午前9時9分 [OFF]/[ON] The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set to or . ≥ Depending on the recording conditions, start time may be longer than 1 second. ≥ In the quick power on mode, the zoom magnification becomes 1k. [QUICK START] [OFF]/[ON] This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is reopened.
HDC-SD800EB_eng.book 41 ページ [REMOTE CONTROL] 2010年12月24日 金曜日 午前9時9分 [OFF]/[ON] Please refer to page 45. [REC LAMP] [OFF]/[ON] The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording. [ALERT SOUND] [OFF]/ / Touch screen operation, start and stop of recording and unit on/off can be confirmed with this sound.
HDC-SD800EB_eng.book 42 ページ [AV MULTI] 2010年12月24日 金曜日 午前9時9分 [COMPONENT]/[AV OUT] Please refer to page 100. [COMPONENT OUT] [576i]/[1080i] Please refer to page 100. [HDMI RESOLUTION] [AUTO]/[1080p]/[1080i]/[576p] Please refer to page 100. [VIERA Link] [OFF]/[ON] Please refer to page 101. [TV ASPECT] [16:9]/[4:3] Please refer to page 99. [3D PLAYBACK] [3D]/[2D] Please refer to page 103. [INITIAL SET] Set to [YES] for changing the menu settings back to the default condition.
HDC-SD800EB_eng.book 43 ページ 2010年12月24日 金曜日 午前9時9分 [NUMBER RESET] Set the file number of the iFrame and still picture recorded next to 0001. ≥ Folder number is updated and file number will start from 0001. (l 128) ≥ To reset the folder number, format the SD card, and then perform [NUMBER RESET]. ≥ Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc.
HDC-SD800EB_eng.book 44 ページ 2010年12月24日 金曜日 午前9時9分 [CALIBRATION] Perform the touch screen calibration if a different object to the one touched is selected. 1 Touch [CALIBRATION]. ≥ Touch [ENTER]. 2 Touch the [_] that appears on the screen with the supplied stylus pen. ≥ Touch [_] in sequence (up left # down left # down right # up right # centre). 3 Touch [ENTER]. [DEMO MODE] [OFF]/[ON] This item is used to start the unit demonstration.
HDC-SD800EB_eng.book 45 ページ 2010年12月24日 金曜日 午前9時9分 Basic Using with the remote control Select the menu. MENU : [SETUP] # [REMOTE CONTROL] # [ON] 1 2 3 4 START/ STOP /VOL DATE/TIME EXT DISPLAY SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP 5 6 7 11 OK button [OK] * means that these buttons function in the same manner as the corresponding buttons on the unit. Remove the insulation sheet A before using.
HDC-SD800EB_eng.book 46 ページ 2010年12月24日 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. 金曜日 午前9時9分 Operation of direction buttons/OK button 1 Press a direction button. STILL ADV PAUSE SKIP STOP STILL ADV SKIP MENU OK Warning Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth.
HDC-SD800EB_eng.book 47 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Recording) Zoom in/out function VOL Zoom lever/Zoom button icons T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) T W 6 W T T W ≥ Maximum zoom magnification for recording motion pictures can be set with [ZOOM MODE]. (l 60) ≥ You can also zoom by simply touching the LCD monitor.
HDC-SD800EB_eng.book 48 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Recording) Image stabilizer function Use the image stabilizer to reduce the effects of shake during recording. This unit is equipped with hybrid optical image stabilizer. Hybrid optical image stabilizer is a hybrid of optical and electrical image stabilizer. ≥ Please refer to page 52 for details about the optical image stabilizer lock. O.I.S. Optical image stabilizer button Press the button to turn optical image stabilizer on/off.
HDC-SD800EB_eng.book 49 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Recording) 1080/50p recording This is a 1080/50p (1920k1080/50 progressive) recording mode that can record in maximum quality*. * This means the highest quality for this unit. 1080/50p button To set to 1080/50p recording mode, press and hold the button until 1080/50p is displayed. ≥ To return to normal recording mode, press and hold the button until 1080/50p disappears. ≥ Please refer to page 149 about approximate recordable time.
HDC-SD800EB_eng.book 50 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Recording) Recording with the Touch function You can record using convenient functions just by the easy operation of touching the screen. 1 2 Touch (left side)/ (right side) of on the touch menu to display touch function icons. (l 23) (e.g. AF/AE tracking) Touch the touch function icon. ≥ To cancel, touch the Touch function icon again. (Optical image stabilizer lock is cancelled by releasing the finger touching .
HDC-SD800EB_eng.book 51 ページ 2010年12月24日 金曜日 午前9時9分 AF/AE tracking It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking) 1 Touch . ≥ When [FACE RECOG.] (l 62) is [ON] and a registered face is detected, the target is automatically locked. 2 Touch the object and lock the target.
HDC-SD800EB_eng.book 52 ページ 2010年12月24日 金曜日 午前9時9分 Optical image stabilizer lock In motion picture recording mode, you can further improve optical image stabilization by touching and holding optical image stabilizer lock icon. With this function, you can further reduce the effects of the shake that tends to occur when using zoom. A Optical image stabilizer lock icon 1 2 Press the optical image stabilizer button to turn the image stabilizer on. Touch and hold .
HDC-SD800EB_eng.book 53 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Recording) Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. 1 Touch (left side)/ (right side) of on the touch menu to display the operation icons. (l 23) ≥ Touch / downward. 2 on touch menu to switch pages upward or (e.g. Backlight compensation) Touch an operation icon. ≥ Select the operation icon again to cancel the function.
HDC-SD800EB_eng.book 54 ページ 2010年12月24日 金曜日 午前9時9分 Fade When you start recording, the image/audio gradually appears. (Fade in) When you pause recording, the image/audio gradually disappears. (Fade out) ≥ The fade setting is cancelled when the recording stops. ∫ To select the colour for fade in/out MENU : [RECORD SETUP] # [FADE COLOUR] # [WHITE] or [BLACK] (Fade in) (Fade out) ≥ The thumbnails of scenes recorded using fade in become black (or white).
HDC-SD800EB_eng.book 55 ページ 2010年12月24日 金曜日 午前9時9分 ≥ Images displayed on the thumbnail in playback mode will differ from the motion pictures displayed at the start of playback. Smile shot When a smiling face is detected during motion picture recording, the unit automatically records a still picture. The icon changes each time it is touched. ([ON]) # ([FACE RECOG.]) # [OFF] : : The unit records a still picture on detecting a smiling face.
HDC-SD800EB_eng.book 56 ページ 2010年12月24日 金曜日 午前9時9分 Built-in flash When the button is pressed, the flash is activated and the picture will be recorded. Use the built-in flash in order to record still pictures in dark places. Each time the ß icon is selected, the indication changes by one setting in the following order: ß ([ON]) # ßA ([AUTO]) # ([OFF]) ≥ The unit automatically determines if the flash is necessary even when it has been set to by detecting the ambient brightness.
HDC-SD800EB_eng.book 57 ページ 2010年12月24日 金曜日 午前9時9分 Self-timer This is for recording still pictures using the timer. Each time the icon is selected, the indication changes by one setting in the following order: Ø10 (Records after 10 seconds) # Ø2 (Records after 2 seconds) # setting cancelled ≥ When the button is pressed, a still picture is recorded after the Ø10 or Ø2 display and the recording lamp flashes for the time which has been set. After recording, the selftimer is cancelled.
HDC-SD800EB_eng.book 58 ページ 2010年12月24日 金曜日 午前9時9分 Tele macro A more impressive image can be obtained by focusing on the object only in close-up and shading off the background. ≥ The unit can focus on the subject at a distance of approx. 70 cm. ≥ When the Tele macro is set with the zoom magnification less than 12k, it will automatically be set to 12k. ≥ The tele macro function is cancelled when the zoom magnification becomes lower than 12k.
HDC-SD800EB_eng.book 59 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Recording) Recording functions of menus [SCENE MODE] When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures.
HDC-SD800EB_eng.book 60 ページ 2010年12月24日 金曜日 午前9時9分 ≥ (Night scenery/Night portrait) j The shutter speed is 1/2 or more in still picture recording mode. j It is recommended using a tripod. ≥ (Night portrait) j The flash is set to [ON]. [ZOOM MODE] Set the maximum zoom ratio for the motion picture recording mode. MENU : [RECORD SETUP] # [ZOOM MODE] # desired setting [Opt.Zoom 12k]: Optical zoom only (Up to 12k) [i.Zoom 20k]: This zoom function allows you to maintain high-definition picture quality.
HDC-SD800EB_eng.book 61 ページ 2010年12月24日 金曜日 午前9時9分 [TIME LAPSE REC] A scene that moves slowly for long period of time is recorded frame by frame with an interval, and is recorded as a short time motion picture. A frame is recorded with a set recording interval. 25 frames will make up motion picture of 1 second. ≥ Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 60) ≥ Set [REC MODE] to [HA], [HG], [HX] or [HE]. (l 60) MENU : [RECORD SETUP] # [TIME LAPSE REC] # desired setting [OFF]: Cancel the setting.
HDC-SD800EB_eng.book 62 ページ 2010年12月24日 金曜日 午前9時9分 [FACE RECOG.] Face recognition is a function for finding faces that resemble faces which have already been registered and automatically prioritising focus and exposure for those faces. This function makes it possible to keep the face of your loved ones in focus even when they are at the back or on the end of a line in a group picture. MENU : [RECORD SETUP] # [FACE RECOG.
HDC-SD800EB_eng.book 63 ページ 2010年12月24日 金曜日 午前9時9分 ∫ Registering a face for face recognition MENU : [RECORD SETUP] # [FACE RECOG.] # [SET] # [SAVE] ≥ Up to a maximum of 6 people can be registered. 1 Align the person’s face with the guide. ≥ Take a picture of the persons face from the front, ensuring that their hair does not hide the outline of their face, their eyes or their eyebrows. 2 Touch [REC] or press the button fully. ≥ Touch [ENTER].
HDC-SD800EB_eng.book 64 ページ 2010年12月24日 金曜日 午前9時9分 ∫ Changing the information of a registered person 1 Select the menu. MENU 2 : [RECORD SETUP] # [FACE RECOG.] # [SET] # [EDIT] Touch the desired item to enter the setting. ≥ Up to 3 face shots can be registered. To additionally register or to change/delete the registered face shots, touch or the face shot.
HDC-SD800EB_eng.book 65 ページ 2010年12月24日 金曜日 午前9時9分 [NAME DISPLAY] When a registered person is detected by face recognition during recording, the name registered for that person is displayed. MENU : [RECORD SETUP] # [NAME DISPLAY] # desired number [OFF]/[1]/[2]/[3] ≥ Displayed name will disappear after a while. ≥ It is displayed according to the registration order setting from the first person. ≥ This function is not displayed during recording of yourself or playback mode.
HDC-SD800EB_eng.book 66 ページ 2010年12月24日 金曜日 午前9時9分 [AUTO SLOW SHTR (2D)] You can record bright pictures even in dark places by slowing the shutter speed. ≥ Switch to manual mode. (l 76) MENU : [RECORD SETUP] # [AUTO SLOW SHTR (2D)] # [ON] ≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness. ≥ This function cannot be used when using the 3D Conversion Lens (optional). ≥ This function cannot be used in still picture recording mode.
HDC-SD800EB_eng.book 67 ページ 2010年12月24日 金曜日 午前9時9分 [Digital Cinema Colour] Recording motion pictures with more vivid colours, using x.v.Colour™ technology. ≥ Switch to manual mode. (l 76) ≥ Set [REC MODE] to [HA], [HG], [HX] or [HE] (l 60), or set to 1080/50p recording mode. (l 49) MENU : [RECORD SETUP] # [Digital Cinema Colour] # [ON] ≥ For more realistic colours, use an HDMI mini cable with a TV that supports the x.v.Colour™.
HDC-SD800EB_eng.book 68 ページ 2010年12月24日 金曜日 午前9時9分 [WIND NOISE CANCELLER] This will reduce the wind noise coming into the built-in microphones while maintaining the realism. ≥ Switch to manual mode. (l 76) MENU : [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON] ≥ This function’s default setting is [ON]. ≥ When switching to intelligent auto mode, [WIND NOISE CANCELLER] is set to [ON], and the setting cannot be changed. ≥ You may not see the full effect depending on the recording conditions.
HDC-SD800EB_eng.book 69 ページ 2010年12月24日 金曜日 午前9時9分 [MIC LEVEL] When recording, the input level from the built-in microphones can be adjusted. ≥ Switch to manual mode. (l 76) 1 Select the menu. MENU : [RECORD SETUP] # [MIC LEVEL] # desired setting [AUTO]: [SETr AGC is activated, and the recording level is adjusted automatically. ]/[SET]: The desired recording level can be set. ≥ It is possible to select the setting from the quick menu in manual mode.
HDC-SD800EB_eng.book 70 ページ 2010年12月24日 金曜日 午前9時9分 [PICTURE ADJUST] Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ This setting is retained when you change between motion picture recording mode and still picture recording mode. ≥ Switch to manual mode. (l 76) 1 Select the menu. MENU 2 : [RECORD SETUP] # [PICTURE ADJUST] Touch the desired setting items.
HDC-SD800EB_eng.book 71 ページ 2010年12月24日 金曜日 午前9時9分 [LUMINANCE] Displays the luminance level of the centre of the screen (luminance display frame) in %. It makes the adjustment of the brightness of the object easier, by checking the luminance level of the object, when recording same object in different surroundings. Adjust the brightness using [IRIS]. (l 78) ≥ Switch to manual mode. (l 76) MENU : [RECORD SETUP] # [LUMINANCE] # desired setting ≥ It is possible to set from the quick menu in manual mode.
HDC-SD800EB_eng.book 72 ページ 2010年12月24日 金曜日 午前9時9分 [PICTURE SIZE] The higher the number of pixels, the higher the clarity of the picture when printing. MENU : [PICTURE] # [PICTURE SIZE] # desired setting ≥ It is possible to set from the quick menu. (l 37) ≥ The number of recording pixels that can be set changes depending on selected screen aspect ratio. (l 73) ∫ Picture size and Maximum zoom ratio Picture size Aspect ratio Extra optical zoom (l 47) –* 12.2M 4032k3024 7.7M 3200k2400 4.
HDC-SD800EB_eng.book 73 ページ 2010年12月24日 金曜日 午前9時9分 ≥ This function’s default settings are 14.2M in still picture recording mode and 13.3M in motion picture recording mode. ≥ The recording will become longer depending on the recording pixels. ≥ Please refer to page 150 about the number of recordable pictures. [QUALITY] Selecting the picture quality. MENU : [PICTURE] # [QUALITY] # desired setting : Still pictures with a high picture quality are recorded.
HDC-SD800EB_eng.book 74 ページ 2010年12月24日 金曜日 午前9時9分 [HI-SPEED BURST] Recording is done continuously at the rate of 50 still pictures per second. Use this function to record an object with fast movement. 1 Select the menu. MENU : [PICTURE] # [HI-SPEED BURST] # desired setting [OFF]: Cancel the setting. [50 Frames/sec]: 180 still pictures are recorded continuously at the rate of 50 per second. The picture size is 2.1 M (1920k1080). 2 Press the button. ≥ flashes in red during recording.
HDC-SD800EB_eng.book 75 ページ 2010年12月24日 金曜日 午前9時9分 [AF ASSIST LAMP] Illuminating the subject makes it easier for the camera to focus when recording in low light conditions that make focusing difficult. ≥ Switch to manual mode. (l 76) MENU : [PICTURE] # [AF ASSIST LAMP] # [AUTO] ≥ The available distance of the AF assist lamp is approx. 1.5 m. ≥ A conversion lens (optional) can block the AF assist lamp, and it will become harder to adjust the focus.
HDC-SD800EB_eng.book 76 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Recording) Manual recording ≥ The manual focus, white balance, shutter speed, brightness (Iris and Gain) settings are retained when you change between motion picture recording mode and still picture recording mode. Press the iA/MANUAL button to switch to manual mode. ≥ MNL appears on the screen.
HDC-SD800EB_eng.book 77 ページ 2010年12月24日 金曜日 午前9時9分 White balance The automatic white balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ≥ Press the iA/MANUAL button to switch to manual mode. (l 76) 1 2 Touch [WB]. Touch / MNL FOCUS to select white balance mode. ≥ Select the optimal mode by confirming the colour on the screen. ≥ Touch [WB] to determine the mode.
HDC-SD800EB_eng.book 78 ページ 2010年12月24日 金曜日 午前9時9分 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Press the iA/MANUAL button to switch to manual mode. (l 76) 1 2 Touch [SHTR] or [IRIS]. Touch / to adjust settings. ≥ Touch [SHTR]/[IRIS] to complete the adjustments.
HDC-SD800EB_eng.book 79 ページ 2010年12月24日 金曜日 午前9時9分 Manual focus adjustment If auto focusing is difficult due to the conditions, then use manual focus. ≥ Press the iA/MANUAL button to switch to manual mode. (l 76) 1 (When MF assist function is used) Select the menu. MENU : [RECORD SETUP] # [MF ASSIST] # [ON] ≥ It is possible to set from the quick menu. (l 37) ≥ Touch 2 3 to display the manual icon. Touch [FOCUS]. Touch [MF] to change to manual focus. ≥ MF appears on the screen.
HDC-SD800EB_eng.book 80 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Recording) Recording 3D video With the 3D Conversion Lens (optional) attached, you can record life-like and powerful 3D video. To view 3D video, a television that supports 3D is required. 3D video The image is an illustration. ≥ In the unit, the recordable 3D videos are side-by-side format (2-screen structure). ≥ Since the 3D video is recorded in side-by-side format, the recorded 3D video is not of high definition picture quality.
HDC-SD800EB_eng.book 81 ページ 4 2010年12月24日 金曜日 Touch [EXIT] to end the adjustment. ≥ After adjustment, a single screen appears. ≥ When re-attaching the 3D Conversion Lens or after an impact etc., it is recommended that you perform the adjustment again. A 5 午前9時9分 3D HG 3D 0h00m00s R 1h20m appears. Press the recording start/stop button to start recording. ≥ Start recording after removing the Lens front cap.
HDC-SD800EB_eng.book 82 ページ 2010年12月24日 金曜日 午前9時9分 ∫ Functions that cannot be used during 3D recording When recording with the 3D Conversion Lens, you cannot use certain functions.
HDC-SD800EB_eng.book 83 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Playback) Playback operations Motion picture playback using operation icon For details on the basic playback operations, refer to page 33. Playback operation Fast forward/ rewind playback Playback display During Playback Operating steps Touch 5 during playback to fast forward. (Touch 6 to rewind.) ≥ The fast forward/rewind speed increases if you touch 5/6 again. (The display on the screen changes from 5 to .
HDC-SD800EB_eng.book 84 ページ Playback operation 2010年12月24日 Playback display During Playback Direct playback 金曜日 午前9時9分 Operating steps Touch the Direct playback bar or slide it while touching. ≥ The playback pauses temporarily and skips to the position touched or slid to while touching. ≥ Playback will start by releasing your touching or sliding finger. ≥ Direct playback bar cannot be operated with the remote control.
HDC-SD800EB_eng.book 85 ページ 2010年12月24日 金曜日 午前9時9分 ≥ A portion judged to be clearly recorded will be detected and displayed in thumbnail if you select [HIGHLIGHT]. 3 (When [MINUTES] is selected) Touch / to set the time. ≥ It can be set up to a maximum of 60 minutes. ≥ Touch [ENTER]. 4 Touch the thumbnail to be played back. ≥ Next (previous) thumbnail can be displayed by touching / . Repeat playback Playback of the first scene starts after playback of the last scene finishes.
HDC-SD800EB_eng.book 86 ページ 2010年12月24日 金曜日 午前9時9分 Zooming in on a still picture during playback (Playback zoom) You can zoom in by touching a still picture during playback. 1 Touch and hold the part you wish to zoom in on during still picture playback. ≥ The still picture is zoomed in the following order: k1 # k2 # k4. Touch and hold the screen to zoom in from the normal display to k2, Touch the screen to zoom in from k2 to k4. ≥ The still picture is zoomed in on, centring on the part you touched.
HDC-SD800EB_eng.book 87 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Playback) Various playback functions Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. 1 2 Touch the date select icon. (l 23) Touch the playback date. ALL The scenes or the still pictures recorded on the date selected are displayed as thumbnails. 3 Touch the scene or the still picture to be played back.
HDC-SD800EB_eng.book 88 ページ 2010年12月24日 金曜日 午前9時9分 Highlight playback Part that was recognised as clearly recorded is extracted from a long recording, and it can be played back in a short time with effects and music added. ≥ Highlight playback cannot be used for iFrame scenes. 1 Touch . (l 23) ALL 2 (Only when you would like to change the settings) Touch [SET] to select the item to change. [SCENE SETUP]: Select the scene or date to be played back.
HDC-SD800EB_eng.book 89 ページ 2010年12月24日 金曜日 午前9時9分 ∫ Priority settings 1 Touch [FACE] or [FACE RECOG.]. ≥ Touch [FACE], any detected face, including the face of person registered for face recognition, is given priority on playback. 2 (When [FACE RECOG.] is selected) Touch a face to specify. KEN 1 ANNA 2 MARY ≥ You can specify up to 6 faces, which are to be played back in priority. JOE ≥ When touched, the registered face is selected and surrounded by red.
HDC-SD800EB_eng.book 90 ページ 2010年12月24日 金曜日 午前9時9分 ∫ Music setting 1 Touch your favourite music. ≥ When [EFFECT SETUP] is set to [NONE], you will be able to select [NO MUSIC]. When [NO MUSIC] is selected, the audio recorded at the time of shooting is played back. ≥ To adjust the volume of music during playback or audio testing, operate the volume lever. (l 34) 2 Touch [ENTER]. To test the music audio Touch [START]. ≥ Touch the other music option to change the music to be tested.
HDC-SD800EB_eng.book 91 ページ 2010年12月24日 金曜日 午前9時9分 (When [SLIDES INTERVAL] is selected) Touch the interval of playback for the slide show. [SHORT]: Approx. 1 second [NORMAL]: Approx. 5 seconds [LONG]: Approx. 15 seconds (When [MUSIC SELECT] is selected) Touch the desired sound. ≥ To adjust the volume of music during playback of the slide show or audio testing, operate the volume lever. (l 34) ≥ Touch [ENTER]. (To test the music audio) Touch [START] and start the audio testing.
HDC-SD800EB_eng.book 92 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Playback) Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to . ∫ To delete the scene or still picture being played back Touch while scenes or still pictures to be deleted are being played back.
HDC-SD800EB_eng.book 93 ページ 2010年12月24日 金曜日 午前9時9分 ≥ The scenes or still pictures that have already been deleted when the deletion is cancelled cannot be restored. To complete editing Touch [Return]. ≥ You can also delete scenes by touching [MENU], selecting [EDIT SCENE] # [DELETE] # [ALL SCENES], [MULTI] or [SINGLE]. ≥ You can also delete still pictures by touching [MENU], selecting [PHOTO SETUP] # [DELETE] # [ALL SCENES], [MULTI] or [SINGLE].
HDC-SD800EB_eng.book 94 ページ 2010年12月24日 金曜日 午前9時9分 ≥ You cannot divide a scene if you are playing back a disc with a DVD burner (optional) connected, or if the number of scenes of a given date would exceed 99 scenes. ≥ It may not be possible to divide scenes with a short recording time. ≥ Data that has been recorded or edited on another device cannot be divided and the divided points cannot be deleted.
HDC-SD800EB_eng.book 95 ページ 2010年12月24日 金曜日 午前9時9分 Deleting personal information Deletes face recognition information from scenes in which faces were recognised. ≥ Change the mode to and touch the play mode select icon. Then set [VIDEO/ PICTURE] to [1080/50p] or [AVCHD]. (l 33) ≥ Personal information is not recorded in the iFrame scenes. 1 Select the menu. MENU 2 : [VIDEO SETUP] # [DELETE PERSONAL INFO] Touch the desired scenes to be deleted personal information.
HDC-SD800EB_eng.book 96 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Playback) DPOF setting You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Change the mode to and touch the play mode select icon. Then set [VIDEO/PICTURE] to [PICTURE].
HDC-SD800EB_eng.book 97 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Playback) Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. A High quality 1 HDMI terminal 2 Component terminal 3 Video terminal ≥ Use the AV multi cable (supplied) or HDMI mini cable (optional) and check the output settings. (l 100) ≥ HDMI is the interface for digital devices.
HDC-SD800EB_eng.book 98 ページ 2010年12月24日 金曜日 午前9時9分 ≥ Check that the plugs are inserted as far as they go. ≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other AV multi cables except the supplied one. ≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required. ≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug of the AV multi cable.
HDC-SD800EB_eng.book 99 ページ 2010年12月24日 ∫ To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen Change the menu setting to display the images correctly. (Check the TV setting.
HDC-SD800EB_eng.book 100 ページ 2010年12月24日 金曜日 午前9時9分 Connecting with a HDMI mini cable Select the desired method of HDMI output. MENU : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p] ≥ [AUTO] determines the output resolution automatically based on information from the connected TV. If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [576p] which enables the images to be displayed on your TV.
HDC-SD800EB_eng.book 101 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Playback) Playback using VIERA Link What is the VIERA Link (HDAVI Control™)? ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
HDC-SD800EB_eng.book 102 ページ 2010年12月24日 3 金曜日 午前9時9分 Operate with the remote control for the TV. 1) 2) 1) Press the button up, down, left or right to select a scene or still picture to be played back, and then press the button in the centre to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
HDC-SD800EB_eng.book 103 ページ 2010年12月24日 金曜日 午前9時9分 Advanced (Playback) 3D video playback Connect the unit to a 3D compatible television and play back scenes recorded in 3D to enjoy life-like and powerful 3D video. ¬ Change the mode to and touch the play mode select icon. Then set [VIDEO/PICTURE] to [AVCHD]. (l 33) 1 Select the menu. MENU : [SETUP] # [3D PLAYBACK] # [3D] [3D]: Play back scenes recorded in 3D in unaltered form as 3D video.
HDC-SD800EB_eng.book 104 ページ 2010年12月24日 金曜日 午前9時9分 ≥ You cannot play back 3D video on the LCD monitor of the unit. When you play back scenes recorded in 3D on the LCD monitor, they will be played back in 2D. ≥ You can also play back scenes recorded in 3D by date. Even if scenes are recorded on the same day, the unit will display the date separately when switching between 2D and 3D recordings.
HDC-SD800EB_eng.book 105 ページ 2010年12月24日 金曜日 午前9時9分 Copy/Dubbing Copy/Dubbing Connecting a DVD burner to copy to/ play back a disc Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner (optional) to this unit using a USB Connection Cable (supplied with DVD burner). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
HDC-SD800EB_eng.book 106 ページ 2010年12月24日 1 金曜日 午前9時9分 Connect the AC adaptor (supplied with DVD burner) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. 2 3 Connect this unit to the AC adaptor and change the mode to Connect this unit to the DVD burner with the USB Connection Cable (supplied with DVD burner). A USB Connection Cable (supplied with DVD burner) B DVD burner (optional) ≥ Insert the plugs as far as they will go. 4 Insert the disc in the DVD burner.
HDC-SD800EB_eng.book 107 ページ 2010年12月24日 金曜日 午前9時9分 Copying to discs ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ You cannot copy motion pictures together with still pictures or motion pictures in a different picture quality (AVCHD picture quality and conventional normal picture quality) to the same disc. ≥ iFrame scenes cannot be copied to disc. Copy to PC to make a backup. (l 118) 1 2 3 Connect this unit to the DVD burner to prepare for copying.
HDC-SD800EB_eng.book 108 ページ 2010年12月24日 金曜日 午前9時9分 Important Notice ≥ When connecting an optional DVD burner and this unit for copying a disc, do not insert a disc with recorded motion pictures in high definition picture quality into devices that do not support the AVCHD format. In some cases the disc may get stuck in the device. The disc will not play back on devices that do not support the AVCHD format.
HDC-SD800EB_eng.book 109 ページ 2010年12月24日 金曜日 午前9時9分 ≥ The disc that was copied to can be played back by connecting this unit and a DVD burner. ≥ Do not turn off this unit or the DVD burner or disconnect the USB Connection Cable while copying. Also, do not shake this unit or the DVD burner. ≥ It is impossible to stop copying halfway. ≥ The order in which the scenes were copied cannot be changed. ≥ Data that has been recorded on another device may not be copied.
HDC-SD800EB_eng.book 110 ページ 2010年12月24日 金曜日 午前9時9分 Managing the copied disc ≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 106) ∫ Formatting discs This is for initializing DVD-RAM, DVD-RW and +RW discs. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Back up important data on a PC etc. MENU : [DISC SETUP] # [FORMAT DISC] ≥ When formatting is complete, touch [EXIT] to exit the message screen.
HDC-SD800EB_eng.book 111 ページ 2010年12月24日 金曜日 午前9時9分 Copy/Dubbing Dubbing with a Blu-ray disc recorder, video devices, etc. ∫ Check before dubbing Check the equipment used for dubbing.
HDC-SD800EB_eng.book 112 ページ 2010年12月24日 金曜日 午前9時9分 Dubbing in high-definition picture quality You can dub using a Panasonic Blu-ray disc recorder or high-definition (AVCHD) compatible DVD recorder. ≥ Depending on the recorders or the media to be copied to, you may not be able to copy in high-definition (AVCHD) picture quality. For further details, see the operating instructions of your recorder. ≥ Note that the equipment described may not be available in certain countries and regions.
HDC-SD800EB_eng.book 113 ページ 2010年12月24日 3 金曜日 午前9時9分 Dubbing through operations on the Blu-ray disc recorder or highdefinition (AVCHD) compatible DVD recorder. About the screen indication of the unit ≥ When the unit is accessing the SD card, card access icon ( ) appears on the unit screen or the access lamp is on. ≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing the media, as this may result in the loss of recorded content.
HDC-SD800EB_eng.book 114 ページ 2010年12月24日 金曜日 午前9時9分 Dubbing in standard picture quality ∫ Dubbing using equipment without an SD card slot or a USB terminal, or using a video device You can dub by connecting an AV multi cable. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to.
HDC-SD800EB_eng.book 115 ページ 2010年12月24日 金曜日 午前9時9分 Copy/Dubbing 3D video storage You can store 3D video with a DVD burner, a video device or a PC. Copying with a DVD burner ≥ Please refer to page 105 for details about copying with a DVD burner. ∫ Copying unaltered as 3D video Recording format: [AVCHD] The scenes recorded in 3D using the unit can be copied and stored in unaltered form as 3D video.The video is recorded unaltered in side-by-side format.
HDC-SD800EB_eng.book 116 ページ 2010年12月24日 金曜日 午前9時9分 ∫ Dubbing in standard picture quality ≥ Please refer to page 114 for details about dubbing in standard picture quality. Copying unaltered as 3D video When [3D PLAYBACK] is [3D], the 3D video is recorded in side-by-side format. MENU : [SETUP] # [3D PLAYBACK] # [3D] ≥ If the dubbed video does not change to 3D video, make the necessary settings on the TV. (For further details, please read the operating instructions for the TV.
HDC-SD800EB_eng.book 117 ページ 2010年12月24日 金曜日 午前9時9分 Using HD Writer AE 3.0 ≥ Please refer to page 118 for details about copying with HD Writer AE 3.0. When you use HD Writer AE 3.0 to handle scenes recorded in 3D, the following operations are possible. j Copying data to a PC (Scenes recorded in 3D will be copied unaltered as 3D video.) j Copying in BD/AVCHD format (Scenes recorded in 3D will be copied unaltered as 3D video.
HDC-SD800EB_eng.book 118 ページ 2010年12月24日 金曜日 午前9時9分 With a PC What you can do with a PC HD Writer AE 3.0 You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs, DVD discs or SD cards using HD Writer AE 3.0, the software installed in the supplied CD-ROM. Refer to the operating instructions of HD Writer AE 3.0 (PDF file) for details on how to use it.
HDC-SD800EB_eng.book 119 ページ 2010年12月24日 金曜日 午前9時9分 ≥ It is possible to play back on a PC using a image viewer standard to Windows or commercially available image browsing software, and copy pictures to a PC using Windows Explorer. ≥ Please refer to page 130 for details about using a Mac. Important Notice ≥ When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.html ≥ Do not insert a disc recorded in AVCHD format with HD Writer AE 3.
HDC-SD800EB_eng.book 120 ページ 2010年12月24日 金曜日 午前9時9分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
HDC-SD800EB_eng.book 121 ページ 2010年12月24日 金曜日 午前9時9分 With a PC Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible Blu-ray disc/DVD writer drive and media are necessary for writing to a Blu-ray disc/DVD.) ≥ Operation is not guaranteed in the following cases.
HDC-SD800EB_eng.book 122 ページ 2010年12月24日 金曜日 午前9時9分 Display High Colour (16 bit) or more (32 bit or more recommended) Desktop resolution of 1024k768 pixels or more (1920k1080 pixels or more recommended) Windows 7/Windows Vista: DirectX 9.0c compatible video card (DirectX 10 recommended) Windows XP: DirectX 9.
HDC-SD800EB_eng.book 123 ページ 2010年12月24日 金曜日 午前9時9分 ∫ Operating environment for the card reader function (mass storage) PC IBM PC/AT compatible PC OS Windows 7 (32 bit/64 bit) Windows Vista (32 bit) (SP1/SP2) Windows XP (32 bit) (SP3) CPU Windows 7/Windows Vista: 1.
HDC-SD800EB_eng.book 124 ページ 2010年12月24日 金曜日 午前9時9分 With a PC Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed. ≥ Explanation of operations and screens is based on Windows 7.
HDC-SD800EB_eng.book 125 ページ 2010年12月24日 5 Select where the application is to be installed, then click [Next]. 6 Select [Yes] or [No] to create shortcut. 金曜日 午前9時9分 ≥ A message regarding the playback in the environment used may be displayed depending on the performance of the PC used. Click [OK] after confirming. 7 8 When installation is complete, some notes will appear. Check the contents, then close the window. Select [Yes, I want to restart my computer now.], then click [Finish].
HDC-SD800EB_eng.book 126 ページ 2010年12月24日 金曜日 午前9時9分 With a PC Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) ≥ Insert the plugs as far as they will go. 1 Connect this unit to the AC adaptor. ≥ It is possible to use it connected to the PC with the batteries only. Use the AC adaptor to free you from worrying about the battery running down.
HDC-SD800EB_eng.book 127 ページ 2010年12月24日 金曜日 午前9時9分 ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) ≥ When the unit is connected to a PC, it cannot be turned off. Disconnect the USB cable, before turning this unit off. ≥ When performing reading/writing between a PC and an SD card, be aware that some SD card slots built into PCs and some SD card readers are not compatible with the SDHC memory card or SDXC memory card.
HDC-SD800EB_eng.book 128 ページ 2010年12月24日 金曜日 午前9時9分 About the PC display When the unit is connected to a PC, it is recognised as an external drive. ≥ Removable disk (Example: ) is displayed in [Computer]. We recommend using HD Writer AE 3.0 to copy motion picture data. Using Windows Explorer or other programmes on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable with HD Writer AE 3.0.
HDC-SD800EB_eng.book 129 ページ 2010年12月24日 金曜日 午前9時9分 With a PC Starting HD Writer AE 3.0 ≥ To use the software, log on as an Administrator or as user name for standard user account (only for Windows 7/Windows Vista). The software cannot be used with the user name for a guest account. (On the PC) Select [Start] # [All Programs] # [Panasonic] # [HD Writer AE 3.0] # [HD Writer AE]. ≥ For details on how to use the software applications, read the PDF operating instructions of the software.
HDC-SD800EB_eng.book 130 ページ 2010年12月24日 金曜日 午前9時9分 With a PC If using Mac ≥ HD Writer AE 3.0 is not available for Mac. ≥ iMovie’11 supported. For details about iMovie’11, please contact Apple Inc. ≥ 1080/50p scenes cannot be imported to a Mac. ≥ Since iMovie’11 is not compatible with 1080/50p, it cannot acquire the scenes recorded in 1080/50p. Record in normal recording mode when importing to Mac. ≥ There are some limitations in the functions when iMovie’11 is used. Refer to page 140 for details.
HDC-SD800EB_eng.book 131 ページ 2010年12月24日 金曜日 午前9時9分 Others Indications ∫ Recording indications Motion picture recording mode 0h00m00s Still picture recording mode 1h30m R 1h20m +1 R 3000 1h30m +1 14.2M MEGA PRE-REC MF 1/100 OPEN 0dB 12:34 15. 11. 2011 99%↑ / / / / / / +2 / / / / / / Remaining time for motion picture recording (l 27) / +1 / -1 / A Power LCD (l 41) Manual mode (l 76) / / / Intelligent auto mode (l 31) MNL MF 1/100 OPEN 0dB 12:34 15. 11.
HDC-SD800EB_eng.
HDC-SD800EB_eng.book 133 ページ 2010年12月24日 ∫ Playback indications 1/;/5/ /6/ D/E/;1/2; /7/8/9/:/ 金曜日 午前9時9分 ∫ Indication of connection to other devices Accessing the card (l 113, 127) Display during playback (l 33, 83) 0h00m00s Playback time (l 33) ∫ Confirmatory indications No.10 Scene number –– (Time display) Repeat playback (l 85) The built-in battery is low.
HDC-SD800EB_eng.book 134 ページ 2010年12月24日 金曜日 午前9時9分 Others Messages Major confirmation/error messages to be indicated on the screen in text. CHECK CARD. This card is not compatible or it cannot be recognised by the unit. If this message appears even though motion pictures and still pictures are recorded on an SD card, the card may be unstable. Reinsert the SD card, then turn the unit off and then on again. THIS BATTERY CANNOT BE USED. ≥ Use a battery that is compatible with this unit.
HDC-SD800EB_eng.book 135 ページ 2010年12月24日 金曜日 午前9時9分 About recovery If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.) SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. (IRREPARABLE SCENES WILL BE DELETED.) ≥ The above message is displayed when abnormal management information is detected when the scenes are displayed in thumbnail.
HDC-SD800EB_eng.book 136 ページ 2010年12月24日 金曜日 午前9時9分 Others Troubleshooting Power Problem This unit cannot be turned on. This unit does not stay on long enough. Check points ≥ Charge the battery again to ensure it is sufficiently charged. (l 15) ≥ In cold places, the battery using time becomes shorter. ≥ The battery has a limited life. If the operating time is still too short even after the battery is fully charged, the battery has worn out and needs to be replaced. Battery runs down quickly.
HDC-SD800EB_eng.book 137 ページ 2010年12月24日 金曜日 午前9時9分 Indication Problem Remaining battery indication is not displayed properly. Check points ≥ The remaining battery capacity indication is an approximation. If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again. Recording Problem Check points The unit arbitrarily stops recording. ≥ Use an SD card that can be used for motion picture recording.
HDC-SD800EB_eng.book 138 ページ 2010年12月24日 金曜日 午前9時9分 Playback Problem Check points Any scenes/still pictures cannot be played back. ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be played back. Scenes cannot be deleted. ≥ Release the protect setting. (l 95) ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be deleted. If the scenes/still pictures are unnecessary, format the media to erase the data.
HDC-SD800EB_eng.book 139 ページ 2010年12月24日 金曜日 午前9時9分 With other products Problem Although this unit is correctly connected to a TV, images cannot be seen. The images are squeezed horizontally. Check points ≥ Please read the operating instructions of your TV and select the channel that matches the input used for the connection. ≥ Change the [TV ASPECT] setting to match the aspect ratio of the TV. (l 99) ≥ Change the setting of the unit depending on the cable connecting to the TV.
HDC-SD800EB_eng.book 140 ページ 2010年12月24日 金曜日 午前9時9分 With a PC Problem Check points When connected by the USB cable, this unit is not detected by the PC. ≥ After re-inserting the SD card into the unit, reconnect the supplied USB cable. ≥ Select another USB terminal on the PC. ≥ Check the operating environment. (l 121, 130) ≥ Connect the supplied USB cable again after restarting the PC and turning on this unit again. When the USB cable is disconnected, an error message will appear on the PC.
HDC-SD800EB_eng.book 141 ページ 2010年12月24日 金曜日 午前9時9分 ∫ If scenes do not change smoothly when played back on another device (AVCHD, 1080/50p) The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit.
HDC-SD800EB_eng.book 142 ページ 2010年12月24日 金曜日 午前9時9分 Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
HDC-SD800EB_eng.book 143 ページ 2010年12月24日 Do not use the unit for surveillance purposes or other business uses. ≥ This unit was designed for consumer intermittent use. It was not intended for continuous use, or for any industrial or commercial application resulting in prolonged use. ≥ In certain situations, continuous use could cause the unit to overheat and cause a malfunction. Such use is strongly discouraged.
HDC-SD800EB_eng.book 144 ページ 2010年12月24日 ≥ After use, be sure to disconnect the AC adaptor. (If it is left connected, a minute amount of current is consumed.) ≥ Always keep the electrodes of the AC adaptor and battery clean. About status indicator during charging When the status indicator is flashing at a particularly fast or slow rate, the following should be considered. Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx.
HDC-SD800EB_eng.book 145 ページ 2010年12月24日 When viewing 3D video, we recommend taking a break every 30 to 60 minutes. ≥ Viewing for extended periods may cause eye-fatigue. Short-sighted or long-sighted persons, those with differences in the sight of their right and left eyes, and those with astigmatism are advised to correct their vision by wearing glasses etc. Stop viewing if you can clearly see a double image while viewing 3D video.
HDC-SD800EB_eng.book 146 ページ 2010年12月24日 LCD monitor ≥ When the LCD monitor gets dirty, wipe it with a soft cloth, such as eye glass cleaner. ≥ Do not touch the LCD monitor with your finger nails, or rub or press with strong force. ≥ It may become hard to see or hard to recognise the touch when the LCD protection sheet is affixed. ≥ In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with a soft cloth, such as eye glass cleaner.
HDC-SD800EB_eng.book 147 ページ 2010年12月24日 金曜日 午前9時9分 About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥ When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
HDC-SD800EB_eng.book 148 ページ 2010年12月24日 金曜日 午前9時9分 Others About copyright ∫ Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. ∫ Licenses ≥ SDXC Logo is a trademark of SD-3C, LLC. ≥ “AVCHD” and the “AVCHD” Logo are trademarks of Panasonic Corporation and Sony Corporation.
HDC-SD800EB_eng.book 149 ページ 2010年12月24日 金曜日 午前9時9分 Others Recording modes/approximate recordable time ≥ SD cards are only mentioned with their main memory size. The stated times are the approximate recordable times for continuous recording.
HDC-SD800EB_eng.book 150 ページ 2010年12月24日 金曜日 午前9時9分 Others Approximate number of recordable pictures ≥ SD cards are only mentioned with their main memory size. The stated number is the approximate number of recordable pictures. (When [ASPECT RATIO] is set to [4:3] and [QUALITY] is set to Picture size SD card 12.2M 4032k3024 7.7M 3200k2400 4.9M 2560k1920 4 GB 610 940 1500 30000 2500 3900 6200 122000 64 GB 10000 15800 25000 492000 Picture size 4 GB 16 GB 64 GB 14.
HDC-SD800EB_eng.book 151 ページ 2010年12月24日 金曜日 午前9時9分 ≥ The number of recordable pictures depends on whether and are used together and on the subject being recorded. ≥ Maximum number of recordable pictures that can be displayed is 99999. If the number of recordable pictures exceeds 99999, the number will not change when the picture is taken until the number of recordable pictures gets less than 99999.
HDC-SD800EB_eng.book 152 ページ 2010年12月24日 金曜日 午前9時9分 Others Optional accessories Product numbers correct as of Dec. 2010. These may be subject to change. Some optional accessories may not be available in some countries.
HDC-SD800EB_eng.book 153 ページ 2010年12月24日 金曜日 午前9時9分 ∫ Attaching the conversion lens/ filter kit Attach the wide conversion lens (VW-W4607H; optional), the wide end conversion lens (VW-WE08H; optional), ND filter or MC protector of the Filter kit (VW-LF46NE; optional) in front of the lens. ≥ It is not possible to attach it to the front of the lens hood. (l 26) ≥ You will not be able to use the flash. Set the flash setting to ([OFF]). (l 56) Be careful about the following.
HDC-SD800EB_eng.book 154 ページ 2010年12月24日 金曜日 午前9時9分 Others Specifications High Definition Video Camera Information for your safety Power source: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Power consumption: Recording; 5.8 W Charging; 10.1 W Signal system: 1080/50p, 1080/50i, 540/25p Recording format: [1080/50p]; Original format [HA]/[HG]/[HX]/[HE]; AVCHD format compliant [iFrame]; MPEG-4 AVC file format complaint (.MP4) Image sensor: 1/4.1 type (1/4.
HDC-SD800EB_eng.book 155 ページ 2010年12月24日 金曜日 午前9時9分 Speaker: 1 round speaker, dynamic type White balance adjustment: Auto tracking white balance system Standard illumination: 1,400 lx Minimum required illumination: Approx. 1.6 lx (1/25 with low light mode in the scene mode) Approx. 1 lx with the colour night view function AV multi connector video output level: Component video out put level; Y; 1.0 Vp-p, 75 h Pb; 0.7 Vp-p, 75 h Pr; 0.7 Vp-p, 75 h AV video output level; 1.
HDC-SD800EB_eng.book 156 ページ 2010年12月24日 金曜日 午前9時9分 ∫ 3D Conversion Lens (optional) Lens: F3.2 (f = 2.5 mm) 35 mm equivalent; 58 mm Minimum recording distance; Approx. 1.2 m Minimum illumination: Approx. 28 lx (1/25 when [AUTO SLOW SHTR (3D)] is set to [ON]) ∫ Motion pictures Recording media: SD Memory Card (FAT12 and FAT16 system compliant) SDHC Memory Card (FAT32 system compliant) SDXC Memory Card (exFAT system compliant) Refer to page 18 for details on SD cards usable in this unit.
HDC-SD800EB_eng.book 157 ページ 2010年12月24日 金曜日 午前9時9分 AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 16 W DC 9.3 V, 1.2 A Dimensions: 52 mm (W)k26 mm (H)k86.3 mm (D) Mass: Approx. 115 g Specifications may change without prior notice.
HDC-SD800EB_eng.book 158 ページ 2010年12月24日 金曜日 午前9時9分 Index ∫ Numerics 1080/50p . . . . . . . . . . . . . . . . . . . . . . . . 5 1080/50p recording . . . . . . . . . . . . . . . 49 3D playback/viewing . . . . . . . . . 103, 144 3D recording . . . . . . . . . . . . . . . . 80, 144 ∫A AC adaptor . . . . . . . . . . . . . . . . . 15, 143 AF assist lamp . . . . . . . . . . . . . . . . . . . 75 AF/AE tracking . . . . . . . . . . . . . . . . . . 51 Alert sound . . . . . . . . . . . . . . . . . . . . .
HDC-SD800EB_eng.book 159 ページ 2010年12月24日 Mode switch . . . . . . . . . . . . . . . . . . . . 21 Motion picture compatibility . . . . . . . . . 35 ∫N Name display . . . . . . . . . . . . . . . . . . . 65 Number reset . . . . . . . . . . . . . . . . . . . 43 ∫O O.I.S. LOCK . . . . . . . . . . . . . . . . . . . . 52 Operation icons . . . . . . . . . . . . . . . . . . 53 Optical image stabilizer demo . . . . . . . . 44 ∫P Picture adjustment . . . . . . . . . . . . . . . . 70 Picture quality . . . . . . . .
HDC-SD800EB_eng.book 160 ページ 2010年12月24日 金曜日 午前9時9分 EU Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany B VQT3K43 F1210YK0 ( 1700 ) Panasonic Corporation Web site: http://panasonic.