HDC-SD600EP-VQT2U80_mst.book 1 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Operating Instructions High Definition Video Camera Model No. HDC-SD600 Before use, please read these instructions completely. Please also refer to Operating Instructions (PDF format) recorded on the CD-ROM containing the Operating Instructions (supplied). You can learn about advanced operation methods and check the Troubleshooting.
HDC-SD600EP-VQT2U80_mst.book 2 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. ≥ USE ONLY THE RECOMMENDED ACCESSORIES. ≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
HDC-SD600EP-VQT2U80_mst.book 3 ページ ２０１０年４月１２日 ∫ EMC Electric and magnetic compatibility This symbol (CE) is located on the rating plate. Use only the recommended accessories. ≥ Do not use any other AV multi cables and USB cables except the supplied one. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
HDC-SD600EP-VQT2U80_mst.book 4 ページ ２０１０年４月１２日 magnetic fields created by speakers or large motors. ≥ Electromagnetic wave radiation generated by microprocessors may adversely affect this unit, disturbing the pictures and/or sound. ≥ If this unit is adversely affected by electromagnetic equipment and stops functioning properly, turn this unit off and remove the battery or disconnect AC adaptor. Then reinsert the battery or reconnect AC adaptor and turn this unit on.
HDC-SD600EP-VQT2U80_mst.book 5 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Contents Information for Your Safety.....................2 Accessories..............................................6 Setup [1] Power supply.............................. 11 Charging the battery .................... 11 Inserting/removing the battery ..... 12 Charging and recording time........ 13 Connecting to the AC outlet ......... 14 [2] Recording to a card ................... 15 Cards that you can use with this unit .........................
HDC-SD600EP-VQT2U80_mst.book 6 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Accessories Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of Apr 2010. These may be subject to change.
HDC-SD600EP-VQT2U80_mst.book 7 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Optional accessories Product numbers correct as of Apr 2010. These may be subject to change. Some optional accessories may not be available in some countries.
HDC-SD600EP-VQT2U80_mst.book 8 ページ Preparation 1 Before using ２０１０年４月１２日 1 2 3 4 6 7 8 9 10 11 12 13 15 16 17 18 19 20 8 VQT2U80 (ENG) 午後２時３２分 Parts identification and handling 1 234 5 14 月曜日 Speaker Power button [ ] (l 17) Inlet (cooling fan) Intelligent auto/Manual button [iA/MANUAL] (l 23) 5 Optical image stabilizer button [ /O.I.S.
HDC-SD600EP-VQT2U80_mst.book 9 ページ ２０１０年４月１２日 月曜日 午後２時３２分 21 LCD monitor (Touch screen) (l 19) 21 ≥ It can open up to 90o. 22 23 24 25 26 ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture. 22 Quick menu button [Q.
HDC-SD600EP-VQT2U80_mst.book 10 ページ 28 29 30 32 33 月曜日 35 1 Flip the belt. 2 Adjust the length. 3 Replace the belt.
HDC-SD600EP-VQT2U80_mst.book 11 ページ Preparation Setup 1 ２０１０年４月１２日 月曜日 午後２時３２分 Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. ≥ The unit has a function for distinguishing batteries which can be used safely. The dedicated battery (VW-VBG130/VW-VBG260/VW-VBG6) supports this function.
HDC-SD600EP-VQT2U80_mst.book 12 ページ ２０１０年４月１２日 月曜日 午後２時３２分 ≥ We recommend using Panasonic batteries (l 6, 7, 13). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure.
HDC-SD600EP-VQT2U80_mst.book 13 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC/humidity: 60% Battery model number [Voltage/Capacity (minimum)] Supplied battery/ VW-VBG130 (optional) [7.2 V/1250 mAh] VW-VBG260 (optional) [7.2 V/2500 mAh] (optional)* VW-VBG6 [7.
HDC-SD600EP-VQT2U80_mst.book 14 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit.
HDC-SD600EP-VQT2U80_mst.book 15 ページ Preparation Setup 2 ２０１０年４月１２日 月曜日 午後２時３２分 Recording to a card This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC memory card with other equipment, check the equipment is compatible with these memory cards. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.
HDC-SD600EP-VQT2U80_mst.book 16 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Caution: Check that the access lamp has gone off. Access lamp [ACCESS] A ≥ When this unit is accessing the SD card, the access lamp lights up.
HDC-SD600EP-VQT2U80_mst.book 17 ページ Preparation Setup 3 ２０１０年４月１２日 月曜日 午後２時３２分 Turning the unit on/off You can turn the unit on and off using the power button or by opening and closing the LCD monitor. Turning the unit on and off with the power button Press the power button to turn on the unit To turn off the unit Hold down the power button until the status indicator goes off. A The status indicator lights.
HDC-SD600EP-VQT2U80_mst.book 18 ページ Preparation Setup 4 ２０１０年４月１２日 月曜日 午後２時３２分 Selecting a mode Change the mode to recording or playback. Operate the mode switch to change the mode to Motion picture recording mode (l 21) Still picture recording mode (l 22) Playback mode (l 24) 18 VQT2U80 (ENG) , or .
HDC-SD600EP-VQT2U80_mst.book 19 ページ Preparation Setup 5 ２０１０年４月１２日 月曜日 午後２時３２分 Adjusting LCD monitor How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. ≥ Do not touch the LCD monitor with hard pointed tips, such as ball point pens.
HDC-SD600EP-VQT2U80_mst.book 20 ページ Preparation Setup 6 ２０１０年４月１２日 月曜日 午後２時３２分 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Change the mode to 1 or . Select the menu. : [SETUP] # [CLOCK SET] 2 Touch the date or time to be set, then set the desired value using / .
HDC-SD600EP-VQT2U80_mst.book 21 ページ Basic 1 Recording/ Playback 1 2 3 Change the mode to ２０１０年４月１２日 月曜日 午後２時３２分 Recording motion pictures . Open the LCD monitor. Press the recording start/stop button to start recording. A When you begin recording, ; changes to ¥. 4 Press the recording start/stop button again to pause recording.
HDC-SD600EP-VQT2U80_mst.book 22 ページ Basic 2 Recording/ Playback 1 2 3 Change the mode to 4 Press the ２０１０年４月１２日 月曜日 Recording still pictures . Open the LCD monitor. Press the button halfway. (For auto focus only) button fully. ∫ About the screen indications in still picture recording MEGA 14.2M R3000 : ß: ßj: : MEGA : : : 14.
HDC-SD600EP-VQT2U80_mst.book 23 ページ Basic Recording/ Playback 3 ２０１０年４月１２日 月曜日 午後２時３２分 Intelligent auto mode The following modes appropriate for the condition are set just by pointing the unit to what you want to record. /MANUAL Intelligent auto/Manual button Press this button to switch intelligent auto mode/manual mode. Mode Scene Effect Portrait When the object is a person Faces are detected and focused automatically, and the brightness is adjusted so it is recorded clearly.
HDC-SD600EP-VQT2U80_mst.book 24 ページ Basic Recording/ Playback 4 ２０１０年４月１２日 月曜日 Motion picture/Still picture playback 1 2 Change the mode to 3 Touch [VIDEO/SD CARD] or [PICTURE/SD CARD]. 4 . Touch the play mode select icon A. Touch the scene or the still picture to be played back. VQT2U80 (ENG) A [VIDEO/SD CARD] B [PICTURE/SD CARD] ≥ Next (previous) page can be displayed by touching / .
HDC-SD600EP-VQT2U80_mst.book 25 ページ 5 ２０１０年４月１２日 月曜日 午後２時３２分 Select the playback operation by touching the operation icon. A Operation icon 0h00m00s ≥ Touch icon. F / F to display/not-display the operation F Motion picture playback 1/;: 6: 5: ∫: 1: Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. Displays the direct playback bar.
HDC-SD600EP-VQT2U80_mst.book 26 ページ Basic Setup 1 2 1 ２０１０年４月１２日 午後２時３２分 Using the menu screen Press the MENU button. 5 Touch the top menu A. Touch [EXIT] or press the MENU button to exit the menu setting. ∫ About 3 月曜日 Touch the submenu B. guide display After touching , touching the submenus and items will cause function descriptions and settings confirmation messages to appear. ≥ After the messages have been displayed, the guide display is cancelled.
HDC-SD600EP-VQT2U80_mst.book 27 ページ Advanced 1 Recording (Advanced) ２０１０年４月１２日 月曜日 午後２時３２分 Zoom in/out function The maximum optical zoom ratio is 12k. The default setting of the [ZOOM MODE] is [Opt.Zoom 12k]. ¬ Change the mode to or . Zoom lever/Adjust zoom buttons 6 W T T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) ≥ The zoom speed varies depending on the range over which the zoom lever is moved.
HDC-SD600EP-VQT2U80_mst.book 28 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Extra optical zoom If the number of the recording pixels is set to anything other than the maximum number of recording pixels in still picture recording mode, the still picture can be recorded with a zoom ratio of a maximum of 25k without degrading the picture quality. ≥ Extra optical zoom ratio varies depending on the setting of [PICTURE SIZE] and [ASPECT RATIO]. ∫ Extra optical zoom mechanism When you set the picture size to 0.
HDC-SD600EP-VQT2U80_mst.book 29 ページ Advanced Recording (Advanced) 2 ２０１０年４月１２日 月曜日 午後２時３２分 Optical image stabilizer function Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬ Change the mode to O.I.S. or . Optical image stabilizer button Pressing the button changes the optical image stabilizer setting.
HDC-SD600EP-VQT2U80_mst.book 30 ページ Advanced Editing 1 ２０１０年４月１２日 月曜日 午後２時３２分 Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to . To delete by confirming images being played back Press the button while scenes or still pictures to be deleted are being played back.
HDC-SD600EP-VQT2U80_mst.book 31 ページ Advanced Editing 2 ２０１０年４月１２日 月曜日 午後２時３２分 Formatting Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. Select the menu. (l 26) : [SETUP] # [FORMAT CARD] ≥ When formatting is complete, touch [EXIT] to exit the message screen. ≥ Perform a physical formatting of the SD card when the SD card is to be disposed/ transferred.
HDC-SD600EP-VQT2U80_mst.book 32 ページ Advanced With a TV 1 ２０１０年４月１２日 月曜日 午後２時３２分 Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the supplied AV multi cable. Check the output settings when connecting the component terminal or the video terminal with the AV multi cable.
HDC-SD600EP-VQT2U80_mst.book 33 ページ ２０１０年４月１２日 月曜日 午後２時３２分 ≥ Check that the plugs are inserted as far as they go. ≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other AV multi cables except the supplied one. ≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required. ≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug of the AV multi cable.
HDC-SD600EP-VQT2U80_mst.book 34 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 5.8 W Signal system 1080/50p, 1080/50i Recording format 1080/50p: Original format HA/HG/HX/HE: AVCHD format compliant Image sensor 1/4.1 type (1/4.
HDC-SD600EP-VQT2U80_mst.book 35 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Microphone Stereo (with a zoom microphone) Speaker 1 round speaker, dynamic type White balance adjustment Auto tracking white balance system Standard illumination 1,400 lx Minimum required illumination Approx. 1.6 lx (1/25 in low light mode) Approx. 1 lx with the colour night view function AV multi connector video output level Component video out put level: Y: 1.0 Vp-p, 75 h Pb: 0.7 Vp-p, 75 h Pr: 0.
HDC-SD600EP-VQT2U80_mst.book 36 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Motion pictures Recording media SD Memory Card (FAT12 and FAT16 system compliant) SDHC Memory Card (FAT32 system compliant) SDXC Memory Card (exFAT system compliant) Refer to page 15 for details on SD cards usable in this unit. Compression MPEG-4 AVC/H.264 Recording mode and transfer rate 1080/50p: Approx. 28 Mbps (VBR) HA: Approx. 17 Mbps (VBR) HG: Approx. 13 Mbps (VBR) HX: Approx. 9 Mbps (VBR) HE: Approx.
HDC-SD600EP-VQT2U80_mst.book 37 ページ ２０１０年４月１２日 月曜日 午後２時３２分 AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 19 W DC 9.3 V, 1.2 A (Unit operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions 92 mm (W)k33 mm (H)k61 mm (D) Mass Approx. 115 g Specifications may change without prior notice.
HDC-SD600EP-VQT2U80_mst.book 38 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Others About copyright ∫ Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. ∫ Licenses ≥ SDXC Logo is a trademark of SD-3C, LLC. ≥ “AVCHD” and the “AVCHD” Logo are trademarks of Panasonic Corporation and Sony Corporation.
HDC-SD600EP-VQT2U80_mst.book 39 ページ ２０１０年４月１２日 月曜日 午後２時３２分 Others Reading the Operating Instructions (PDF format) ≥ You have practised the basic operations introduced in these operating instructions and want to progress to advanced operations. ≥ You want to check the Troubleshooting. In these kinds of situations refer to Operating Instructions (PDF format) recorded on the CD-ROM containing the Operating Instructions (supplied).
HDC-SD600EP-VQT2U80_mst.book 40 ページ ２０１０年４月１２日 月曜日 午後２時３２分 EU Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Panasonic Corporation Web site: http://panasonic.
