Operating instructions

ManualsBrandsPanasonic ManualsCamcordersHDCSD5

Before use, please read these instructions completely.

VQT1H64

Operating Instructions

High Definition Video Camera

Model No. HDC-SD5

HDCSD5-VQT1H64_eng.book 1 ページ２００７年８月１日　水曜日　午後７時１６分

Summary of content (136 pages)

PAGE 1
HDCSD5-VQT1H64_eng.book 1 ページ２００７年８月１日水曜日午後７時１６分 Operating Instructions High Definition Video Camera Model No. HDC-SD5 Before use, please read these instructions completely.
PAGE 2
HDCSD5-VQT1H64_eng.book 2 ページ２００７年８月１日 Information for your safety Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic High Definition Video Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your High Definition Video Camera may look somewhat different from those shown in the illustrations in these Operating Instructions.
PAGE 3
HDCSD5-VQT1H64_eng.book 3 ページ２００７年８月１日 Caution for AC mains lead (For United Kingdom) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
PAGE 4
HDCSD5-VQT1H64_eng.book 4 ページ２００７年８月１日 Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.
PAGE 5
HDCSD5-VQT1H64_eng.book 5 ページ２００７年８月１日 ª Indemnity concerning recording content The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this unit, its accessories or recordable media. ª Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted.
PAGE 6
HDCSD5-VQT1H64_eng.book 6 ページ２００７年８月１日 Contents Before using Features of the High Definition Video Camera ..................................... 8 Accessories ......................................... 14 Parts identification and handling ......15 Using the LCD monitor .......................18 Using the remote control .................... 19 Cards that you can use with this unit .................................................... 21 Setup Charging the battery ...........................
PAGE 7
HDCSD5-VQT1H64_eng.book 7 ページ２００７年８月１日水曜日午後７時１６分 Playback With a computer Motion picture playback ..................... 64 Before using with a computer ............ 94 Playing back motion pictures by date ......67 Repeat playback ......................................67 Resuming the previous playback ............68 What you can do with a computer ........... 94 Contents on provided CD-ROM .............. 95 End User License Agreement ................. 96 Operating environment ....................
PAGE 8
HDCSD5-VQT1H64_eng.book 8 ページ２００７年８月１日水曜日午後７時１６分 Before using Before using Features of the High Definition Video Camera Very clear high definition pictures This unit can record highly detailed high definition images to an SD card. You can watch images in high-resolution HD video if you connect this unit and a high definition TV and then play back the images.
PAGE 9
HDCSD5-VQT1H64_eng.book 9 ページ２００７年８月１日水曜日午後７時１６分 Before using About the SDHC Memory Card and the compatibility of the recorded motion pictures (Be careful about the following.) About the SDHC Memory Card ≥ It is not compatible with devices other than those that support SDHC. ≥ If you use the SDHC Memory Card in another device, use a device that is SDHC compatible.
PAGE 10
HDCSD5-VQT1H64_eng.book 10 ページ２００７年８月１日水曜日午後７時１６分 Before using Using the remote control for the TV for playback If you connect this unit to a Panasonic TV (VIERA) compatible with VIERA Link (HDAVI Control™) A with a HDMI cable (optional) B, you can use the remote control for the TV for playback. Refer to the operating instructions of the TV for details.
PAGE 11
HDCSD5-VQT1H64_eng.book 11 ページ２００７年８月１日水曜日午後７時１６分 Before using Saving data to a disc If you connect the DVD burner (VW-BN1E; optional) and this unit with a Mini AB USB Connection Cable (supplied with the DVD burner), you can copy motion picture data recorded on an SD card with this unit to a DVD disc. You can also play back the DVD disc that you copied the data to.
PAGE 12
HDCSD5-VQT1H64_eng.book 12 ページ２００７年８月１日水曜日午後７時１６分 Before using Saving data to a computer You can use the supplied software (HD Writer 2.0E for SX/SD) to copy data recorded an SD card with this unit to the hard disk of the computer. A A USB cable (supplied) ª What you can do with HD Writer Copying data to a computer You can copy data on an SD card to the hard disk of the computer. Writing data to media You can copy motion picture data from the hard disk of the computer to an SD card or a disc.
PAGE 13
HDCSD5-VQT1H64_eng.book 13 ページ２００７年８月１日水曜日午後７時１６分 Before using ª Sales and Support Information (For United Kingdom) Customer Care Centre ≥ For customers within the UK: 0844 844 3852 ≥ For customers within the Republic of lreland: 01 289 8333 ≥ Visit our website for product information ≥ E-mail: customer.care@panasonic.co.
PAGE 14
HDCSD5-VQT1H64_eng.book 14 ページ２００７年８月１日水曜日午後７時１６分 Before using Accessories Check the accessories before using this unit. ≥ SD card is an optional accessory. Battery pack VW-VBG130 ≥ The supplied battery pack is not available as spare part, see the list of optional batteries for alternative battery. (l 25) Optional accessories Some optional accessories may not be available in some countries.
PAGE 15
HDCSD5-VQT1H64_eng.
PAGE 16
HDCSD5-VQT1H64_eng.book 16 ページ２００７年８月１日水曜日午後７時１６分 Before using ª About the cooling fan 27 30 28 15 31 29 ≥ The cooling fan rotates to prevent the internal temperature rising. Take care not to cover the inlets and outlet when using this unit. Using grip belt Adjust the length of the grip belt so that it fits your hand, and hold it properly. 1 Flip the belt.
PAGE 17
HDCSD5-VQT1H64_eng.book 17 ページ２００７年８月１日水曜日午後７時１６分 Before using Lens hood Rotate the lens hood counter-clockwise A to remove it. In order to attach it, place into slot B, and then rotate it clockwise C. A B C ≥ Attach the MC protector or the ND filter of the Filter Kit (VW-LF37WE; optional) in front of the lens hood. Do not attach the other accessories on the hood. (Except for the lens cap) (Refer to the operating instructions for the Filter Kit.
PAGE 18
HDCSD5-VQT1H64_eng.book 18 ページ２００７年８月１日水曜日午後７時１６分 Before using Using the LCD monitor Tripod receptacle The tripod receptacle is a hole used to mount a tripod for the unit. Use of Panasonic’s VW-CT45E (optional) standard tripod is recommended. (For details on mounting the tripod, refer to the operating instructions for the tripod.) You can record the image while viewing it on the LCD monitor. 1 Press the LCD OPEN button and then open the LCD monitor.
PAGE 19
HDCSD5-VQT1H64_eng.book 19 ページ２００７年８月１日水曜日午後７時１６分 Before using 2 Adjust the angle of the LCD monitor as desired. Using the remote control A 1 2 3 PHOTO EXT DISPLAY SHOT DATE/ TIME START/ STOP 7 ZOOM 8 VOL B 4 PLAY SEARCH PAUSE STILL ADV SKIP STOP 6 SKIP MENU 5 ≥ It can be rotated 180° towards the lens A and 90° towards the opposite direction B. ≥ The brightness and colour level of the LCD monitor can be adjusted.
PAGE 20
HDCSD5-VQT1H64_eng.book 20 ページ２００７年８月１日水曜日午後７時１６分 Before using ª Install a button-type battery ª Remote control usable range Install the supplied button-type battery in the remote control before using it. The distance between the remote control and the unit’s remote control sensor A: Within approx. 5m Angle: Approx. 10o up and 15o down, left, and right 1 While pressing the stopper A, pull out the battery holder.
PAGE 21
HDCSD5-VQT1H64_eng.book 21 ページ２００７年８月１日水曜日午後７時１６分 Before using Cards that you can use with this unit Card type SDHC Memory Card SD Memory Card Capacity 8 MB, 16 MB 32 MB, 64 MB, 128 MB Motion picture recording Cannot be used. Cannot be guaranteed in operation.* Still picture recording 256 MB, 512 MB, 1 GB, 2 GB 4 GB, 8 GB Refer to “About SD cards that you can use for motion picture recording”. Can be used.
PAGE 22
HDCSD5-VQT1H64_eng.book 22 ページ２００７年８月１日水曜日午後７時１６分 Before using ª About SD cards that you can use for motion picture recording We recommend using SD Memory cards and SDHC Memory cards conforming to Class 2 or higher of the SD Speed Class Rating or the following SD cards made by Panasonic for motion picture recording.
PAGE 23
HDCSD5-VQT1H64_eng.book 23 ページ２００７年８月１日水曜日午後７時１６分 Setup Setup ª Charging lamp Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ≥ Connect the battery to an AC adaptor to recharge it. ≥ If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor. ≥ Refer to page 25 concerning batteries that can be used with this unit.
PAGE 24
HDCSD5-VQT1H64_eng.book 24 ページ２００７年８月１日水曜日午後７時１６分 Setup Inserting/removing the battery Inserting the battery 1 While sliding the SD CARD/ BATTERY OPEN lever A, move the SD card/battery cover to open it. Removing the battery 1 Open the SD card/battery cover. 2 Remove the battery. ≥ Move A in the direction of the arrow to unlock it and then remove the battery. A 1 2 A 3 Close the SD card/battery cover. 2 Insert the battery until it clicks paying attention to the direction of the battery.
PAGE 25
HDCSD5-VQT1H64_eng.book 25 ページ２００７年８月１日水曜日午後７時１６分 Setup Charging time and recordable time ª About batteries that you can use for this unit The Panasonic battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. VW-VBG130/VW-VBG260/VW-VBG6 come with a function to check whether the battery and unit can be safely used together. ≥ The battery pack holder kit VW-VH04 (optional) is necessary if using VW-VBG260/VW-VBG6.
PAGE 26
HDCSD5-VQT1H64_eng.book 26 ページ２００７年８月１日水曜日午後７時１６分 Setup ≥ The recordable time will become shorter in the following case: jWhen you use this unit with the LCD monitor lit up by pressing the POWER LCD EXTRA button. ≥ The batteries heat up after use or charging. This unit will also heat up while being used. This is not a malfunction. ≥ Be aware that the operating time of the battery will become shorter in low temperatures. We recommend charging a spare battery for use when recording.
PAGE 27
HDCSD5-VQT1H64_eng.book 27 ページ２００７年８月１日水曜日午後７時１６分 Setup Connecting to the AC outlet 5 Attach the DC cable. B Push the centre of the DC cable until it locks. The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. B 6 Close the SD card/battery cover. 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the DC cable to the AC adaptor.
PAGE 28
HDCSD5-VQT1H64_eng.book 28 ページ２００７年８月１日水曜日午後７時１６分 Setup Selecting a mode (Turning the unit on/off) Recording mode (l 41, 45) Use this to record motion pictures and still pictures on an SD card. Rotate the mode dial to switch to recording, playback or power OFF. ≥ Rotate the mode dial slowly. Playback mode (l 64, 68) Use this to play back motion pictures and still pictures recorded on an SD card. How to turn on the power While pressing the lock release button, set the mode dial to or .
PAGE 29
HDCSD5-VQT1H64_eng.book 29 ページ２００７年８月１日水曜日午後７時１６分 Setup 3 Open the LCD monitor. Quick start When quick start is ON the battery power is still being consumed, even when the LCD monitor is closed. This unit will resume recording/pause mode about 1.7 seconds after the LCD monitor is reopened. ≥ When in quick start standby mode about 70% of the power used in recording pause mode is being consumed, so the recording time will be reduced. ¬ Rotate the mode dial to select insert an SD card in this unit.
PAGE 30
HDCSD5-VQT1H64_eng.book 30 ページ２００７年８月１日水曜日午後７時１６分 Setup Inserting/removing an SD card Be sure to set the mode dial to OFF before inserting/removing an SD card. If the SD card is inserted or removed while the power is on, this unit may malfunction or the data recorded on the SD card may be lost. 1 Set the mode dial to OFF. ≥ Check that the status indicator has gone off. 2 While sliding the SD CARD/ BATTERY OPEN lever A, move the SD card/battery cover and open it.
PAGE 31
HDCSD5-VQT1H64_eng.book 31 ページ２００７年８月１日水曜日午後７時１６分 Setup How to use the cursor button This unit has a cursor button A for selecting functions, performing operations etc. so it is easy to operate this unit with one hand. ≥ The indication disappears when the centre of the cursor button is pressed again. ≥ The indication changes each time the cursor button is moved down. 2 Move the cursor button up, left or right to select an item.
PAGE 32
HDCSD5-VQT1H64_eng.book 32 ページ２００７年８月１日水曜日午後７時１６分 Setup About the operation icons displayed in each mode Recording mode Icon Direction Page 3 Intelligent contrast control 50 2 Fade 50 1 Help mode 34 3 Colour night view 51 2 Soft skin mode 52 1 Backlight compensation 52 Ø 3 Self-timer 53 ß 2 Flash 53 1 Tele macro 55 (1/3) (2/3) (3/3) Function Set the AUTO/MANUAL/FOCUS switch to MANUAL.
PAGE 33
HDCSD5-VQT1H64_eng.
PAGE 34
HDCSD5-VQT1H64_eng.book 34 ページ２００７年８月１日水曜日午後７時１６分 Setup Switching the language Help mode The help mode explains the operation icons displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in recording mode. ¬ Rotate the mode dial to select . 1 Press the cursor button to You can switch the language on the screen display or the menu screen. 1 Press the MENU button, then select [LANGUAGE] and press the cursor button. display the icon.
PAGE 35
HDCSD5-VQT1H64_eng.book 35 ページ２００７年８月１日水曜日午後７時１６分 Setup 3 Move the cursor button right or press the cursor button. 7 Press the cursor button to enter the selection. B To get back to the previous screen Move the cursor button left. ≥ The submenu B is displayed. 4 Move the cursor button up or down in order to select the submenu item. C C Current settings on menus To exit the menu screen Press the MENU button. ≥ The menu screen does not appear during recording or playing.
PAGE 36
HDCSD5-VQT1H64_eng.book 36 ページ２００７年８月１日水曜日午後７時１６分 Setup Operating with remote control The menu screen transition is the same as when the buttons on the main unit are used. 1 Press the MENU button. MENU Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. ≥ Move the cursor button up or down to select [YES], press the cursor button and then perform steps 2 and 3 below to set the date and time.
PAGE 37
HDCSD5-VQT1H64_eng.book 37 ページ２００７年８月１日水曜日午後７時１６分 Setup Changing the date and time display style Press the MENU button, then select [SETUP] # [DATE/TIME] # desired display style and press the cursor button. ≥ You can also show or change the date and time display by repeatedly pressing the DATE/ TIME button on the remote control. [DATE] [D/T] 1.1.2008 12:34 1.1.2008 [OFF] WARNING THE LITHIUM BATTERY IN THIS EQUIPMENT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL.
PAGE 38
HDCSD5-VQT1H64_eng.book 38 ページ２００７年８月１日水曜日午後７時１６分 Setup ª In order to increase the brightness of the entire LCD monitor Press the POWER LCD EXTRA button. Changing the picture quality on the LCD monitor Press the MENU button, then select [SETUP] # [LCD AI] # [DYNAMIC] or [NORMAL] and press the cursor button. POWER LCD EXTRA The [ +1 ] indication appears on the LCD monitor.
PAGE 39
HDCSD5-VQT1H64_eng.book 39 ページ２００７年８月１日水曜日午後７時１６分 Recording Recording Before recording First, format the SD card if one which has been used on another device is going to be used for the first time on this unit. (l 76) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC or other device before proceeding with the formatting. We recommend using HD Writer 2.0E for SX/SD to import data recorded on this unit.
PAGE 40
HDCSD5-VQT1H64_eng.book 40 ページ２００７年８月１日水曜日午後７時１６分 Recording ª About auto mode Anti-Ground-Shooting (AGS) Set the AUTO/MANUAL/FOCUS switch to AUTO, and colour balance (white balance) and focusing will be adjusted automatically. This function prevents unnecessary recording when you forget to pause recording and walk with the unit tilted upside down while recording continues. AUTO MANUAL FOCUS jAutomatic white balance (l 129) jAuto focus (l 130) Depending on the brightness of the subject etc.
PAGE 41
HDCSD5-VQT1H64_eng.book 41 ページ２００７年８月１日水曜日午後７時１６分 Recording Recording motion pictures Record motion pictures on an SD card. ≥ Use an SD card that can be used for motion picture recording. (l 22) ≥ This unit records high definition images that are compatible with the 16:9 aspect ratio of a wide-screen TV. 1 Rotate the mode dial to select . ≥ The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene.
PAGE 42
HDCSD5-VQT1H64_eng.book 42 ページ２００７年８月１日水曜日午後７時１６分 Recording ª When recording stops suddenly during motion picture recording When using an SD card other than one that can be used for motion picture recording (l 22), the recording may stop suddenly. At this time, the following message appears. When motion pictures are to be recorded, use a Panasonic SD card or another SD card which can be used to record motion pictures. (l 22) PRE-REC function This prevents you missing a shot.
PAGE 43
HDCSD5-VQT1H64_eng.book 43 ページ２００７年８月１日水曜日午後７時１６分 Recording To end PRE-REC PRE-REC is also ended if you press the PRE-REC button in PRE-REC standby mode. ≥ PRE-REC is cancelled in the following cases. jIf you operate the mode dial. jIf you turn the unit off. jIf you open the SD card/battery cover. jIf you press the MENU button. jIn quick start standby mode.
PAGE 44
HDCSD5-VQT1H64_eng.book 44 ページ２００７年８月１日水曜日午後７時１６分 Recording Recording modes/recordable time available for the motion picture Switch the picture quality of the motion pictures to be recorded. ¬ Rotate the mode dial to select . Press the MENU button, then select [VIDEO] # [REC MODE] # desired item and press the cursor button.
PAGE 45
HDCSD5-VQT1H64_eng.book 45 ページ２００７年８月１日水曜日午後７時１６分 Recording Recording still pictures (JPEG) Record the still picture on an SD card. ≥ This number of recording pixels for still pictures is compatible with the 16:9 aspect ratio of a wide-screen TV. They are recorded at 1920k1080. 1 Rotate the mode dial to select . Focus indication: A B A Focus indication ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful.
PAGE 46
HDCSD5-VQT1H64_eng.book 46 ページ２００７年８月１日水曜日午後７時１６分 Recording ≥ The PHOTO SHOT button on the remote control cannot be pressed halfway. ≥ If the [PICT. QUALITY] is set to [ ], mosaic-pattern noise may appear on a playback image depending on the picture content. ≥ While this unit accesses the SD card ( is displayed/the card access lamp is lit), do not perform the following operations. The SD card or the recorded data may be damaged. jTurn the unit off.
PAGE 47
HDCSD5-VQT1H64_eng.book 47 ページ２００７年８月１日水曜日午後７時１６分 Recording About simultaneous recording (recording still pictures while recording motion pictures) You can record still pictures even while recording motion pictures. While recording motion pictures, press the PHOTO SHOT button fully (press to the bottom) to take the picture. Number of pixels and picture quality for still picture recording Picture quality Selecting the picture quality. Press the MENU button, then select [PICTURE] # [PICT.
PAGE 48
HDCSD5-VQT1H64_eng.book 48 ページ２００７年８月１日水曜日午後７時１６分 Recording Approximate number of recordable pictures on an SD card Zoom in/out function ª Picture quality and number of recordable pictures Picture size Various recording functions You can zoom in up to 10k optically. 2.1Ｍ (1920t1080) ¬ Rotate the mode dial to select . Move the zoom lever.
PAGE 49
HDCSD5-VQT1H64_eng.book 49 ページ２００７年８月１日水曜日午後７時１６分 Recording ≥ If the zoom lever is pushed to the end, you can zoom from 1k up to 10k in as fast as approx. 2.5 seconds. ≥ When the zoom speed is high, the subject may not be focused easily. Digital zoom function If the zoom magnification exceeds 10k, then the digital zoom function will be activated. The maximum magnification provided by the digital zoom can be switched. ¬ Rotate the mode dial to select .
PAGE 50
HDCSD5-VQT1H64_eng.book 50 ページ２００７年８月１日水曜日午後７時１６分 Recording Intelligent contrast control Fade in/fade out function This is for recording both bright and dark parts clearly at the same time. This brightens parts that are in the shadow and difficult to see and suppresses white saturation in bright parts. ¬ Rotate the mode dial to select . 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration. 2 Move the cursor button up to select [ ].
PAGE 51
HDCSD5-VQT1H64_eng.book 51 ページ２００７年８月１日水曜日午後７時１６分 Recording 4 Press the recording start/stop button. Pause recording. (Fade out) Colour night view function This allows recording in dark locations. This function allows you to record colour subjects in dark locations (Minimum required illumination: approx. 1 lx) to stand out against the background. Attach this unit to a tripod, and you can record images free from vibration. ≥ Recorded scene is seen as if frames were missed.
PAGE 52
HDCSD5-VQT1H64_eng.book 52 ページ２００７年８月１日水曜日午後７時１６分 Recording ≥ If you turn off the power or operate the mode dial, the colour night view function is cancelled. ≥ If set in a bright place, the screen may become whitish for a while. Soft skin mode This makes skin colours appear softer for a more attractive appearance. This is more effective if you record the bust image of a person.
PAGE 53
HDCSD5-VQT1H64_eng.book 53 ページ２００７年８月１日水曜日午後７時１６分 Recording Self-timer recording You can record still pictures on an SD card using the timer. ¬ Rotate the mode dial to select . 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration. ≥ The self-timer is cancelled if the power is turned off or the mode dial is operated. ≥ The self-timer standby mode is cancelled when you press the recording start/stop button to start motion picture recording.
PAGE 54
HDCSD5-VQT1H64_eng.book 54 ページ２００７年８月１日水曜日午後７時１６分 Recording ≥ When [FLASH AUTO] is set, the ambient brightness is automatically detected, and the flash will activate only when necessary. (If the flash is not necessary, the [ßA] indicator will not appear when the PHOTO SHOT button is pressed halfway.) ≥ This function’s default setting is [FLASH AUTO]. 3 Press the PHOTO SHOT button. The flash is activated and the picture will be recorded. When the flash is not used Set the flash to [FLASH OFF].
PAGE 55
HDCSD5-VQT1H64_eng.book 55 ページ２００７年８月１日水曜日午後７時１６分 Recording Tele macro function Image stabilizer function This is for bringing only what you want to record into focus to take close-ups. This is for reducing image shakes during recording. By focusing only on the subject and blurring the background, the image can be impressive. The unit can focus on the subject at a distance of approx. 50 cm. ¬ Rotate the mode dial to select . 1 Press the cursor button.
PAGE 56
HDCSD5-VQT1H64_eng.book 56 ページ２００７年８月１日水曜日午後７時１６分 Recording Guide line function This is for viewing the slope and the balance of the image while recording or playing back. You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition. ¬ Rotate the mode dial to select or rotate the mode dial to and then select the [ ] (motion picture playback) tab.
PAGE 57
HDCSD5-VQT1H64_eng.book 57 ページ２００７年８月１日水曜日午後７時１６分 Recording 3 Press the cursor button to set Microphone level This is for adjusting the microphone input level. and then press the MENU button to finish the setting. When recording, the input level from the built-in microphones can be adjusted. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [VIDEO] # [MIC LEVEL] # [SETrAGC] or [SET] and press the cursor button.
PAGE 58
HDCSD5-VQT1H64_eng.book 58 ページ２００７年８月１日水曜日午後７時１６分 Recording Zebra display Colour bar This is for displaying the parts that are too bright. This is for displaying a colour bar to check the colour tone. Parts where white saturation (colour saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). This unit displays a 7 colour bar which is useful for adjusting the picture quality of the TV or the external monitor.
PAGE 59
HDCSD5-VQT1H64_eng.book 59 ページ２００７年８月１日水曜日午後７時１６分 Recording Manual recording functions Auto slow shutter You can record bright pictures even in dark places by slowing the shutter speed. ¬ Rotate the mode dial to select Scene mode . Press the MENU button, then select [ADVANCED] # [AUTO SLOW SHTR] # [ON] and press the cursor button. This is for recording in various situations. When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures.
PAGE 60
HDCSD5-VQT1H64_eng.book 60 ページ２００７年８月１日水曜日午後７時１６分 Recording ≥ You can also cancel the scene mode function by setting the AUTO/MANUAL/FOCUS switch to AUTO. Sports mode ≥ For slow-motion playback or playback pause of recorded pictures, this mode helps diminish camera shake. ≥ During normal playback, the image movement may not look smooth. ≥ Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change.
PAGE 61
HDCSD5-VQT1H64_eng.book 61 ページ２００７年８月１日水曜日午後７時１６分 Recording The centre of the screen is enlarged. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus. ≥ The centre of the screen is not enlarged when [MF ASSIST] is [OFF]. To restore to the automatic adjustment Press the AUTO/MANUAL/FOCUS switch down again to the FOCUS position. ≥ You can also restore the auto focusing by setting the AUTO/MANUAL/FOCUS switch to AUTO.
PAGE 62
HDCSD5-VQT1H64_eng.book 62 ページ２００７年８月１日水曜日午後７時１６分 Recording ≥ Lights used for wedding receptions at hotels, stage spotlights in theatres ≥ Sunrise, sunset etc. To restore to the automatic adjustment Set the white balance mode to [ AWB ]. ≥ You can also restore the automatic adjustment by setting the AUTO/MANUAL/FOCUS switch to AUTO.
PAGE 63
HDCSD5-VQT1H64_eng.book 63 ページ２００７年８月１日水曜日午後７時１６分 Recording Manual shutter speed/aperture adjustment Shutter Speed: Adjust it when recording fast-moving subjects. When recording people outdoors at night, select the auto slow shutter mode and use a flash. Both the subject and the background will become brighter. Aperture: Adjust it when the screen is too bright or too dark. ¬ Rotate the mode dial to select . 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL.
PAGE 64
HDCSD5-VQT1H64_eng.book 64 ページ２００７年８月１日水曜日午後７時１６分 Playback Playback Motion picture playback Play back motion pictures. 1 Rotate the mode dial to select . ≥ If 9 or more scenes have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or moving the cursor button down, selecting / by moving the cursor button left and right and then pressing the cursor button.
PAGE 65
HDCSD5-VQT1H64_eng.book 65 ページ２００７年８月１日水曜日午後７時１６分 Playback ≥ Scenes which cannot be displayed as thumbnails (the thumbnails are displayed as ) cannot be played back. An error message appears and the screen shows the thumbnails. ≥ The power will not turn off even if the LCD monitor is closed. ≥ The date/time displayed may be different from the recording date/time and it may take time to display the thumbnail display when playing back motion pictures not recorded on this unit.
PAGE 66
HDCSD5-VQT1H64_eng.book 66 ページ２００７年８月１日水曜日午後７時１６分 Playback Frame-by-frame playback To adjust the volume The motion picture is advanced one frame at a time. Adjust the speaker volume during playback. 1 Move the cursor button up during Move the volume lever to change the volume level. playback to pause the playback. 2 Move the cursor button right. (The frames will be advanced one at a time in the reverse direction when you move the cursor button left.
PAGE 67
HDCSD5-VQT1H64_eng.book 67 ページ２００７年８月１日水曜日午後７時１６分 Playback Playing back motion pictures by date Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. 1 Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and press the cursor button. ≥ Even if scenes are recorded on the same day, they are grouped separately in the following cases.
PAGE 68
HDCSD5-VQT1H64_eng.book 68 ページ２００７年８月１日水曜日午後７時１６分 Playback Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. Still picture (JPEG) playback Play back the still pictures recorded on the card. 1 Rotate the mode dial to select . Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [ON] and press the cursor button. The lens cover closes.
PAGE 69
HDCSD5-VQT1H64_eng.book 69 ページ２００７年８月１日水曜日午後７時１６分 Playback ≥ The file number display switches to the page number when the still picture playback tab or / is selected. 4 Press the cursor button. The selected file is played back on the full screen. ≥ The operation icon is automatically displayed on the screen. ≥ It takes time to display the file depending on the number of pixels of the file. ≥ Files which cannot be displayed as thumbnails (the thumbnails are displayed as ) cannot be played back.
PAGE 70
HDCSD5-VQT1H64_eng.book 70 ページ２００７年８月１日水曜日午後７時１６分 Editing Editing Editing scenes Deleting scenes This is for deleting scenes recorded on SD cards. Deleting multiple scenes from the thumbnail display ¬ Rotate the mode dial to select and then select the [ ] (motion picture playback) tab. 1 Press the button while the thumbnail view screen is displayed. The deleted scenes cannot be restored.
PAGE 71
HDCSD5-VQT1H64_eng.book 71 ページ２００７年８月１日水曜日午後７時１６分 Editing 4 (Only when [SELECT] is selected in step 2) Press the button. 5 When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) Dividing a scene to delete This is for dividing a scene into two to delete an unnecessary portion. To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. Repeat steps 3-5.
PAGE 72
HDCSD5-VQT1H64_eng.book 72 ページ２００７年８月１日水曜日午後７時１６分 Editing 5 Delete the unnecessary scene. Refer to page 70 for how to delete scenes. To continue dividing other scenes Repeat steps 2-4. To complete editing Press the MENU button. To delete all the divided points Press the MENU button, then select [EDIT SCENE] # [DIVIDE] # [CANCEL ALL] and press the cursor button. ≥ When the confirmation message appears, select [YES], then press the cursor button.
PAGE 73
HDCSD5-VQT1H64_eng.book 73 ページ２００７年８月１日水曜日午後７時１６分 Editing Editing still pictures Deleting still pictures This is for deleting still picture files recorded on SD cards. The deleted files cannot be restored. Deleting multiple files from the thumbnail display ¬ Rotate the mode dial to select and then select the [ ] (still picture playback) tab. 1 Press the button while the thumbnail view screen is displayed.
PAGE 74
HDCSD5-VQT1H64_eng.book 74 ページ２００７年８月１日水曜日午後７時１６分 Editing 5 When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other files Repeat steps 3-5. To complete editing Press the MENU button. ª Deleting still picture files recorded on an SD card by other products A still picture file (other than JPEG) that cannot be played back on this unit may be erased. ≥ Protected files cannot be deleted.
PAGE 75
HDCSD5-VQT1H64_eng.book 75 ページ２００７年８月１日水曜日午後７時１６分 Editing DPOF setting This is for writing the printing data on an SD card. You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ª What is DPOF? DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF.
PAGE 76
HDCSD5-VQT1H64_eng.book 76 ページ２００７年８月１日 Card management Card management Formatting Formatting SD cards This is for initializing cards. Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer etc. ¬ Rotate the mode dial to select . or 1 Press the MENU button, then select [SETUP] # [FORMAT CARD] # [YES] and press the cursor button. 2 When the confirmation message appears, select [YES], then press the cursor button.
PAGE 77
HDCSD5-VQT1H64_eng.book 77 ページ２００７年８月１日水曜日午後７時１６分 With other products ≥ Do not use any other AV cables except the supplied one. ≥ Do not use any other component cables except the supplied one. With other products With a TV ª To display the on-screen information on the TV Playback on TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Connect this unit to a TV with one of the following terminals.
PAGE 78
HDCSD5-VQT1H64_eng.book 78 ページ２００７年８月１日水曜日午後７時１６分 With other products 1 Connecting with a HDMI cable (optional) What is HDMI? HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal. If you connect this unit and a HDMI compatible high definition TV and then play back the recorded high definition images (l 8), you can enjoy them in high resolution with high quality sound.
PAGE 79
HDCSD5-VQT1H64_eng.book 79 ページ２００７年８月１日水曜日午後７時１６分 With other products ª About the settings when connecting with HDMI When this unit is connected to another device with a HDMI cable, the output setting on this unit can be changed. HDMI output resolution You can switch the method to output the images. Press the MENU button, then select [SETUP] # [HDMI RESOLUTION] # desired item and press the cursor button.
PAGE 80
HDCSD5-VQT1H64_eng.book 80 ページ２００７年８月１日水曜日午後７時１６分 With other products 2 Connecting with the component cable (supplied) and the AV cable (supplied) ≥ Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a TV with the component cable (supplied) and the AV cable (supplied). COMPONENT A/V B A AUDIO IN D COMPONENT VIDEO IN C A Component cable (supplied) B AV cable (supplied) ≥ Connect to terminals of the same colour.
PAGE 81
HDCSD5-VQT1H64_eng.book 81 ページ２００７年８月１日水曜日午後７時１６分 With other products ª If the image or audio from this unit is not output on the TV ≥ Check that the plugs are inserted as far as they go. ≥ Check the connected terminal. ≥ Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.) ≥ If the images are not displayed correctly on a wide-screen TV, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.
PAGE 82
HDCSD5-VQT1H64_eng.book 82 ページ２００７年８月１日水曜日午後７時１６分 With other products ª To watch images with a 16:9 aspect ratio on a regular TV (4:3) When playing back motion pictures or still pictures recorded on this unit with a 16:9 aspect ratio on a TV with a 4:3 aspect ratio, the images on the screen may be squeezed horizontally. In this case, change the menu setting to play back the pictures in the original aspect ratio. (Depending on the TV setting, the pictures may not be displayed correctly.
PAGE 83
HDCSD5-VQT1H64_eng.book 83 ページ２００７年８月１日水曜日午後７時１６分 With other products Playback using VIERA Link (HDAVI Control™) If you connect this unit to a Panasonic TV (VIERA) compatible with VIERA Link (HDAVI Control) with a HDMI cable, the following linked operations become possible. ≥ You can use the remote control for the TV to control playback on this unit. ≥ If you use the remote control for the TV to turn off the power, the power on this unit also turns off.
PAGE 84
HDCSD5-VQT1H64_eng.book 84 ページ２００７年８月１日水曜日午後７時１６分 With other products 5 Operate with the remote control for the TV. 1) 2) A DISPLAY ON/OFF B C D 1) Press the button up, down, left or right to select a scene or file to be played back, and then press the button in the centre to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
PAGE 85
HDCSD5-VQT1H64_eng.book 85 ページ２００７年８月１日水曜日午後７時１６分 With other products With a DVD burner Connecting a DVD burner to copy motion picture data to a disc You can copy motion picture data recorded with this unit to a DVD disc using a DVD burner (optional). ≥ AVCHD format high definition images are copied to the DVD disc. ≥ Still pictures cannot be copied. ≥ Do not insert a disc that was copied to by connecting an optional DVD burner and this unit into devices which do not support the AVCHD format.
PAGE 86
HDCSD5-VQT1H64_eng.book 86 ページ２００７年８月１日水曜日午後７時１６分 With other products ¬ Connect the AC adaptor supplied with the DVD burner to the DVD burner. (You cannot supply power to the DVD burner from this unit.) ≥ Please read the operating instructions of the DVD burner for how to use it. 1 Connect this unit to the AC adaptor. ≥ If a battery is used, operation is not possible when this unit is connected to a DVD burner. 2 Set the mode dial to to turn on the power. 3 Connect this unit and the DVD burner.
PAGE 87
HDCSD5-VQT1H64_eng.book 87 ページ２００７年８月１日水曜日午後７時１６分 With other products Copying all the scenes to discs ≥ We recommend preparing the necessary number of DVD-RAM or DVD-RW that have not been recorded on after being formatted by connecting this unit to a DVD burner, or the necessary number of new discs, and spare discs. 1 Press the DISC COPY button while the thumbnail view screen is displayed. Selecting the scenes to copy to 1 disc ¬ Select the [ ] (motion picture playback) tab.
PAGE 88
HDCSD5-VQT1H64_eng.book 88 ページ２００７年８月１日 With other products 4 When the confirmation message appears, select [YES], then press the cursor button. ≥ A message appears indicating copying is complete. Eject the disc and disconnect the Mini AB USB Connection Cable from this unit. If you will delete the data on the SD card after copying is complete, be sure to play back the discs to check that they have been copied to correctly before deleting.
PAGE 89
HDCSD5-VQT1H64_eng.book 89 ページ２００７年８月１日水曜日午後７時１６分 With other products Playing back a disc inserted in the DVD burner You can play back the motion pictures copied to a disc. ¬ Connect the AC adaptor supplied with the DVD burner to the DVD burner. (You cannot supply power to the DVD burner from this unit.) ≥ Please read the operating instructions of the DVD burner for how to use it. 1 Connect this unit to the AC adaptor.
PAGE 90
HDCSD5-VQT1H64_eng.book 90 ページ２００７年８月１日水曜日午後７時１６分 With other products Managing a disc inserted in the DVD burner Rotate the mode dial to select , connect this unit to the DVD burner, insert a disc in the DVD burner and then select [ ] (disc playback) tab (l 86). Formatting discs This is for initializing DVD-RAM and DVD-RW discs. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Store important data on a computer etc.
PAGE 91
HDCSD5-VQT1H64_eng.book 91 ページ２００７年８月１日水曜日午後７時１６分 With other products Displaying disc information Information such as the type of recorded disc, the number of recorded scenes, the remaining space and whether or not the disc is finalized is displayed. Press the MENU button, then select [DISC SETUP] # [INFORMATION] # [YES] and press the cursor button.
PAGE 92
HDCSD5-VQT1H64_eng.book 92 ページ２００７年８月１日水曜日午後７時１６分 With other products 4 Start playback on this unit. Then start recording on the connected device. ≥ See the operating instructions of the video device for details. To stop dubbing 1) Stop recording on the connected device. 2) Then stop playback on this unit. ≥ If the date and time display and function indication are unnecessary, cancel them before dubbing.
PAGE 93
HDCSD5-VQT1H64_eng.book 93 ページ２００７年８月１日水曜日午後７時１６分 With other products 4 Move the cursor button up or 8 Select the layout setting on [PAGE LAYOUT]. down to select the desired number of prints, then press the cursor button. ≥ You can set up to 9 prints. ≥ To cancel the setting, set the number of prints to [0]. ≥ Up to 8 files displayed can be set in succession by repeating steps 3 and 4. 5 Press the MENU button to display the PictBridge menus.
PAGE 94
HDCSD5-VQT1H64_eng.book 94 ページ２００７年８月１日水曜日午後７時１６分 With a computer With a computer Before using with a computer What you can do with a computer Data type Can do Software used Copying data to a computer Writing data to media* Copying data between media* Motion picture Playing back on a computer HD Writer 2.
PAGE 95
HDCSD5-VQT1H64_eng.book 95 ページ２００７年８月１日水曜日午後７時１６分 With a computer Contents on provided CD-ROM The following software applications are contained on the provided CD-ROM. ª HD Writer 2.0E for SX/SD You can acquire data of motion pictures and still pictures on an SD card to the hard disk of the computer, easily edit (split, merge, delete) the motion pictures, then write the data to an SD card or disc.
PAGE 96
HDCSD5-VQT1H64_eng.book 96 ページ２００７年８月１日水曜日午後７時１６分 With a computer End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
PAGE 97
HDCSD5-VQT1H64_eng.book 97 ページ２００７年８月１日水曜日午後７時１６分 With a computer Operating environment ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible drive and media are necessary for writing to a DVD.) ≥ When 2 or more USB devices are connected to a computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed. ≥ Use the supplied USB cable when connecting to the computer.
PAGE 98
HDCSD5-VQT1H64_eng.book 98 ページ２００７年８月１日水曜日午後７時１６分 With a computer Interface USB port [Hi-Speed USB (USB 2.0)] Other requirements Mouse or equivalent pointing device ≥ Supplied CD-ROM is available for Windows only. ≥ Operation on an OS other than the one pre-installed is not guaranteed. ≥ Operation is not guaranteed on computers that are not PC/AT compatible. ≥ Input is not supported in languages other than English, German, French, Italian, Spanish and Simplified Chinese.
PAGE 99
HDCSD5-VQT1H64_eng.book 99 ページ２００７年８月１日水曜日午後７時１６分 With a computer Installation When installing the software, log on to your computer as the Administrator (or with a user name with equivalent authorization) or with the user name for a standard user account. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close any other software applications which are running.
PAGE 100
HDCSD5-VQT1H64_eng.book 100 ページ２００７年８月１日水曜日午後７時１６分 With a computer 6 Click [Finish]. Software application uninstallation Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) The computer must be rebooted for the application to work. [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program].
PAGE 101
HDCSD5-VQT1H64_eng.book 101 ページ２００７年８月１日水曜日午後７時１６分 With a computer Connection and recognition Connection and recognition procedures After the software applications are installed, this unit must be connected to the computer and be correctly recognised by the computer. ≥ Connect after installing the software applications. ≥ Remove the supplied CD-ROM if it is inserted in the computer. (If the [Setup Menu] screen is displayed, wait until it finishes and then remove the CD-ROM.
PAGE 102
HDCSD5-VQT1H64_eng.book 102 ページ２００７年８月１日水曜日午後７時１６分 With a computer About the computer display ª Copying still pictures recorded on the SD card to a computer When the unit is connected to a computer, it is recognised as an external drive. [Removable Disk] is displayed in [My Computer (Computer)].
PAGE 103
HDCSD5-VQT1H64_eng.book 103 ページ２００７年８月１日水曜日午後７時１６分 With a computer To disconnect USB cable safely 1 Double click the ( ) icon in task tray displayed on the computer. Hardware disconnect dialogue appears. ≥ Depending on your computer’s settings, this icon may not be displayed. 2 Select [USB Mass Storage Device] and click [Stop]. 3 Verify [MATSHITA HDC-SD5 USB Device] is selected and click [OK]. Click [Close], and you can safely disconnect the cable.
PAGE 104
HDCSD5-VQT1H64_eng.book 104 ページ２００７年８月１日水曜日午後７時１６分 With a computer 3 Verify the following items are displayed. Using HD Writer 2.0E for SX/ SD [USB Mass Storage Device] is displayed at [Universal Serial Bus controllers]. ≥ When using HD Writer 2.0E for SX/SD on Windows XP/2000, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer 2.
PAGE 105
HDCSD5-VQT1H64_eng.book 105 ページ２００７年８月１日水曜日午後７時１６分 With a computer ≥ Do not use any other USB connection cables except the supplied one. (Operation is not guaranteed with any other USB cables.) ª Playing back the high definition images on the computer 4 Select [PC CONNECT] and then ≥ Start HD Writer 2.0E for SX/SD. press the cursor button. 1 Click the [Start Playback] button. This unit is automatically recognised by the computer.
PAGE 106
HDCSD5-VQT1H64_eng.book 106 ページ２００７年８月１日水曜日午後７時１６分 With a computer ª Converting data that was copied to the hard disk of the computer to MPEG2 format ≥ The images are in conventional standard quality. ≥ You can record the converted data to a DVD disc using other DVD-Video writing software and then play it back on a DVD recorder etc. ≥ Start HD Writer 2.0E for SX/SD. 1 Click the [Easy editing] button. 2 Select the file to be converted into MPEG2 and then click the [Save as MPEG2] button.
PAGE 107
VQT1H64~body2_mst.fm 107 ページ２００７年８月７日火曜日午前９時４６分 With a computer ª Creating a DVD-Video disc You can create a disc (DVD-Video) that can be played back on devices that do not support the AVCHD format. ≥ The images are in conventional standard quality. ≥ Insert an unused DVD-RW or DVD-R in a drive for DVD writing on the computer. ≥ DVD-RAM cannot be used. ≥ You cannot record on a disc that has been already recorded on.
PAGE 108
HDCSD5-VQT1H64_eng.book 108 ページ２００７年８月１日水曜日午後７時１６分 With a computer If using Macintosh ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers cannot be used. ≥ Apple, Mac OS is either registered trademarks or trademarks of Apple Inc. in the United States and/or other countries. ≥ PowerPC is a trademark of International Business Machines Corporation.
PAGE 109
HDCSD5-VQT1H64_eng.book 109 ページ２００７年８月１日水曜日午後７時１６分 Others Others Menus and Indications Menu list Recording menus ª [BASIC] [SCENE MODE] (l 59) [D.ZOOM] (l 49) [O.I.S.
PAGE 110
HDCSD5-VQT1H64_eng.book 110 ページ２００７年８月１日水曜日午後７時１６分 Others ([ Playback menus ] motion picture playback) ([ Playback menus ] still picture playback) ª [PLAY SETUP] ª [PLAY SETUP] [PLAY MODE] (l 67) [REPEAT PLAY] (l 67) [RESUME PLAY] (l 68) [SCENE PROTECT] (l 72) [GUIDE LINES] (l 56) [SCENE PROTECT] (l 74) [DPOF SET] (l 75) ª [EDIT SCENE] [DIVIDE] (l 71) [DELETE] (l 70) ª [DISC COPY]* [COPY ALL] (l 87) [COPY SELECT] (l 87) * This can be used when a DVD burner (optional) is connected.
PAGE 111
HDCSD5-VQT1H64_eng.book 111 ページ２００７年８月１日水曜日午後７時１６分 Others Menus related to [ADVANCED] ª [REC LAMP] ≥ [OFF] ≥ [ON] The recording lamp lights during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording. Menus related to [SETUP] ª [DISPLAY] ≥ [OFF] ≥ [ON] The screen indications are selected as shown in the illustration below.
PAGE 112
HDCSD5-VQT1H64_eng.book 112 ページ２００７年８月１日水曜日午後７時１６分 Others Tele macro Indications , Fade (White), Fade (Black) ª Recording indications Colour night view function Motion picture recording Zoom microphone ＨＧ1920 R30min Wind noise reduction 60min 0h00m00s +1 PRE-REC MNL Microphone level MF AWB Zebra display 1/100 OPEN 0dB 1. 1.
PAGE 113
HDCSD5-VQT1H64_eng.book 113 ページ２００７年８月１日水曜日午後７時１６分 Others Protected still pictures ª Playback indications Number of recording pixels for still pictures Motion picture playback 2.1Ｍ Still picture playback 1920k1080 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
PAGE 114
HDCSD5-VQT1H64_eng.book 114 ページ２００７年８月１日水曜日午後７時１６分 Others Messages CANNOT RECORD. Data writing to the SD card has failed. NO DATA. There are no motion pictures or still pictures recorded on the SD card. If this message appears although data is recorded on the SD card, the condition of the card is probably not stable. Turn off the power and then turn it on again. CANNOT BE USED DUE TO INCOMPATIBLE DATA. CANNOT RECORD INCOMPATIBLE CONTROL DATA.
PAGE 115
HDCSD5-VQT1H64_eng.book 115 ページ２００７年８月１日水曜日午後７時１６分 Others CANNOT RECORD IN AGS MODE. The AGS function is activated. (l 40) PUSH THE RESET SWITCH. An irregularity in the unit has been detected. Press the RESET button to restart the unit. (l 120) CANNOT SET. The [GUIDE LINES], [ZEBRA], [MF ASSIST], [MIC LEVEL] and [RED EYE] menu settings cannot be set when the colour bar is set. CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE USB CABLE FROM THIS UNIT. The DVD burner is not correctly connected.
PAGE 116
HDCSD5-VQT1H64_eng.book 116 ページ２００７年８月１日水曜日午後７時１６分 Others Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
PAGE 117
HDCSD5-VQT1H64_eng.book 117 ページ２００７年８月１日水曜日午後７時１６分 Others Troubleshooting ª Unit operations Problem Check points This unit cannot be turned on. ≥ Is the battery fully charged? # Charge it with the AC adaptor. (l 23) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Is the LCD monitor open? This unit is turned off automatically.
PAGE 118
HDCSD5-VQT1H64_eng.book 118 ページ２００７年８月１日水曜日午後７時１６分 Others Problem This unit cannot be operated though powered up. This unit does not operate normally. Check points ≥ The unit cannot be operated if the LCD monitor is not opened. ≥ Press the RESET button. (l 120) If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again.
PAGE 119
HDCSD5-VQT1H64_eng.book 119 ページ２００７年８月１日水曜日午後７時１６分 Others Problem Check points Recorded still pictures are not clear. ≥ Are you trying to record small or finely detailed objects with [PICT. QUALITY] set at [ ]? # If you try to record small or finely detailed objects with [PICT. QUALITY] set at [ ], the images may break up into a mosaic-like pattern. Record with [PICT. QUALITY] set at [ ] instead. (l 47) Sound is not played back from the built-in speaker of this unit.
PAGE 120
HDCSD5-VQT1H64_eng.book 120 ページ２００７年８月１日水曜日午後７時１６分 Others Problem Check points If the SD card is inserted in another device, it is not recognised. ≥ Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card) that you inserted. (l 21) # Refer to the operating instructions of the device for details. The indication disappears. The screen is frozen. No operation can be performed. White round spots like soap bubbles appear on the recorded picture.
PAGE 121
HDCSD5-VQT1H64_eng.book 121 ページ２００７年８月１日水曜日午後７時１６分 Others ª When connected to another device Problem Check points VIERA Link does not work. ≥ Are you connecting with the component cable or the AV cable? # Connect with a HDMI cable (optional). (l 83) ≥ Is the [VIERA Link] setting appropriate? # Press the MENU button, then select [SETUP] # [VIERA Link] # [ON] with the cursor button. ≥ Depending on HDMI terminal of the TV, the input channel may not switch automatically.
PAGE 122
HDCSD5-VQT1H64_eng.book 122 ページ２００７年８月１日水曜日午後７時１６分 Others If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. * Just how smoothly the scenes will be played back continuously depends on the playback unit.
PAGE 123
HDCSD5-VQT1H64_eng.book 123 ページ２００７年８月１日水曜日午後７時１６分 Others ª When PRE-REC was used for recording 1 Normal recording 2 PRE-REC recording A The picture momentarily stops at the end of the last scene that was recorded normally before PRE-REC recording. ª When the recording mode was changed from HN/HE to HG or from HG to HN/HE A The picture momentarily stops where the scenes switch between HN/HE and HG modes. B Playback is smooth if the same mode is used or the mode is switched between HN and HE.
PAGE 124
HDCSD5-VQT1H64_eng.book 124 ページ２００７年８月１日水曜日午後７時１６分 Others Example 2: When recording again after having deleted the last scene. 1 2 A B Scene to be deleted A new scene is recorded here. The image will be still for several seconds wherever a scene was deleted. The images of consecutive scenes where they are no deletions are played back smoothly one after another. ª If you connected this unit and the DVD burner, selected scenes and then copied them to 1 disc.
PAGE 125
HDCSD5-VQT1H64_eng.book 125 ページ２００７年８月１日水曜日午後７時１６分 Others ª When editing scenes on a computer using a programme such as HD Writer 2.0E for SX/SD Example 1: When scenes were selected using HD Writer 2.0E for SX/SD and output to the media B A 25.5.2007 25.5.2007 25.5.2007 25.5.2007 25.5.2007 25.5.2007 25.5.2007 25.5.
PAGE 126
HDCSD5-VQT1H64_eng.book 126 ページ２００７年８月１日水曜日午後７時１６分 Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
PAGE 127
HDCSD5-VQT1H64_eng.book 127 ページ２００７年８月１日水曜日午後７時１６分 Others About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls. In cold areas, the full charge indication may not appear or the low battery indication may appear about 5 minutes after starting use. At high temperatures, the protection function may be triggered, making it impossible to use the unit.
PAGE 128
HDCSD5-VQT1H64_eng.book 128 ページ２００７年８月１日水曜日午後７時１６分 Others About the SD card ≥ The memory capacity indicated on the label of an SD card is the total of the capacity for copyright protection and management and the capacity which can be used on the unit, a computer etc. ≥ During prolonged use, the unit’s surfaces and the SD card will heat up slightly. This is normal. Always set the mode dial to OFF when inserting or removing an SD card.
PAGE 129
HDCSD5-VQT1H64_eng.book 129 ページ２００７年８月１日水曜日午後７時１６分 Others About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥ When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
PAGE 130
HDCSD5-VQT1H64_eng.book 130 ページ２００７年８月１日水曜日午後７時１６分 Others Outside of the effective range of automatic white balance adjustment, the image will become reddish or bluish. Even within the effective range of automatic white balance adjustment, the automatic white balance adjustment may not function properly if there is more than one light source. For light outside the functional automatic white balance adjustment range, use the manual white balance adjustment mode.
PAGE 131
HDCSD5-VQT1H64_eng.book 131 ページ２００７年８月１日水曜日午後７時１６分 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 6.7 W Signal system 1080/50i Recording format AVCHD format compliant Image sensor 1/6z 3CCD image sensor Total: 560 Kk3 Effective pixels: Motion picture: 520 Kk3 Still picture: 520 Kk3 Lens Auto Iris, F1.8 to F2.8 Focal length: 3.0 mm to 30.
PAGE 132
HDCSD5-VQT1H64_eng.book 132 ページ２００７年８月１日水曜日午後７時１６分 Others Dimensions 65 mm (W)k67 mm (H)k135 mm (D) (excluding projecting parts) Mass Approx. 340 g (without supplied battery and an SD card) Mass in operation Approx.
PAGE 133
HDCSD5-VQT1H64_eng.book 133 ページ２００７年８月１日水曜日午後７時１６分 Others AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 19 W DC 9.3 V, 1.2 A (Unit operation) DC 8.4 V, 0.75 A (Battery charging) Dimensions 92 mm (W)k33 mm (H)k61 mm (D) Mass Approx. 115 g Battery pack Information for your safety Maximum voltage: Nominal voltage: Rated capacitance: DC 8.4 V DC 7.2 V 1320 mAh Specifications may change without prior notice.
PAGE 134
HDCSD5-VQT1H64_eng.book 134 ページ２００７年８月１日水曜日午後７時１６分 Others Index ∫ A A/V terminal . . . . . . . . . . . . . . . . .16, 80, 81, 91 AC adaptor . . . . . . . . . . . . . . . . . . . .23, 27, 127 Anti-Ground-Shooting (AGS) . . . . . . . . . . . . .40 Aperture . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 Auto focus . . . . . . . . . . . . . . . . . . . . . . . . . .130 Auto slow shutter . . . . . . . . . . . . . . . . . . . . . .59 Automatic white balance . . . . . . . . . . . . . . .
PAGE 135
HDCSD5-VQT1H64_eng.book 135 ページ２００７年８月１日水曜日午後７時１６分 Others ∫ R Recordable time . . . . . . . . . . . . . . . . . . . .25, 44 Recording lamp . . . . . . . . . . . . . . . . . . . . . . 111 Recording modes . . . . . . . . . . . . . . . . . . . . . .44 Recording time elapsed . . . . . . . . . . . . . . . . .41 Red eye reduction . . . . . . . . . . . . . . . . . . . . .54 Remaining battery capacity indication . . . . . .26 Remaining number of still pictures . . . . . . . . .
PAGE 136
HDCSD5-VQT1H64_eng.book 136 ページ２００７年８月１日水曜日午後７時１６分 E VQT1H64 F0807MA0 ( 8000 A ) Matsushita Electric Industrial Co., Ltd. Web site: http://panasonic.net Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F.R.