Operating Instructions

ManualsBrandsPanasonic ManualsAV ProductsHDCSD200

High Definition Video Camera

Model No. HDC-SD200

HDC-HS200

Before use, please read these instructions completely.

VQT1Y50

until

2009/03/31

HDCSD200&HS200EB-VQT1Y50_mst.book 1 ページ２００９年１月１５日　木曜日　午後７時４分

Summary of content (148 pages)

PAGE 1
HDCSD200&HS200EB-VQT1Y50_mst.book 1 ページ２００９年１月１５日木曜日午後７時４分 Operating Instructions High Definition Video Camera Model No. HDC-SD200 HDC-HS200 Before use, please read these instructions completely.
PAGE 2
HDCSD200&HS200EB-VQT1Y50_mst.book 2 ページ２００９年１月１５日木曜日午後７時４分 Information for Your Safety Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic High Definition Video Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc.
PAGE 3
HDCSD200&HS200EB-VQT1Y50_mst.book 3 ページ２００９年１月１５日 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. ≥ USE ONLY THE RECOMMENDED ACCESSORIES. ≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PAGE 4
HDCSD200&HS200EB-VQT1Y50_mst.book 4 ページ２００９年１月１５日 ∫ Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
PAGE 5
HDCSD200&HS200EB-VQT1Y50_mst.book 5 ページ２００９年１月１５日 ∫ Licenses ≥ SDHC Logo is a trademark. ≥ “AVCHD” and the “AVCHD” Logo are trademarks of Panasonic Corporation and Sony Corporation. ≥ Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ≥ HDMI, the HDMI Logo and the High-Definition Multimedia Interface are the registered trademarks or trademarks of HDMI Licensing LLC. ≥ HDAVI Control™ is a trademark of Panasonic Corporation. ≥ “x.v.
PAGE 6
HDCSD200&HS200EB-VQT1Y50_mst.book 6 ページ２００９年１月１５日木曜日午後７時４分 Contents Information for Your Safety .......................... 2 Accessories.................................................... 9 Features........................................................ 10 Preparation Before using [1] Handling of HDD (Hard disk drive) [HDC-HS200] ...................................... [2] Parts identification and handling ..... [HDC-SD200]....................................... [HDC-HS200]..........................
PAGE 7
HDCSD200&HS200EB-VQT1Y50_mst.book 7 ページ２００９年１月１５日木曜日 Playback Backup 87 89 90 91 Before using 92 Setup 92 93 95 With a TV [1] Watching Video/Pictures on your TV ........................................................ 96 Connecting with a HDMI mini cable..... 98 Listening in 5.1 channel sound ............ 99 Connecting with the component cable .................................................... 99 [2] Playback using VIERA Link (HDAVI Control™).............................
PAGE 8
HDCSD200&HS200EB-VQT1Y50_mst.book 8 ページ２００９年１月１５日 ∫ Sales and Support Information Customer Care Centre ≥ For customers within the UK: 0844 844 3852 ≥ For customers within the Republic of lreland: 01 289 8333 ≥ Visit our website for product information ≥ E-mail: customer.care@panasonic.co.
PAGE 9
HDCSD200&HS200EB-VQT1Y50_mst.book 9 ページ２００９年１月１５日木曜日午後７時４分 Accessories Check the accessories before using this unit. Battery pack VW-VBG130 AC adaptor VSK0698 Optional accessories Some optional accessories may not be available in some countries.
PAGE 10
HDCSD200&HS200EB-VQT1Y50_mst.book 10 ページ２００９年１月１５日木曜日午後７時４分 Features ∫ Very clear high definition pictures This unit can record detailed high definition images.  High definition images (1920k1080)* A Number of available scan lines 1080 * If the recording mode is HA/HG/HX.  Standard images (720k576) B Number of available scan lines 576 What is the AVCHD? This is a format for recording and playing back highly detailed high definition images. Images are recorded based on the MPEG-4 AVC/H.
PAGE 11
HDCSD200&HS200EB-VQT1Y50_mst.book 11 ページ２００９年１月１５日木曜日午後７時４分 Preparation Before using 1 Handling of HDD (Hard disk drive) [HDC-HS200] This unit is equipped with the built-in 80 GB HDD. While the HDD is capable of storing a large amount of data, there are a few things to look out for. When using this component, pay attention to the following points.
PAGE 12
HDCSD200&HS200EB-VQT1Y50_mst.book 12 ページ２００９年１月１５日 ∫ HDD access lamp [ACCESS HDD] A ≥ The lamp illuminates while the HDD is being accessed (initialization, recording, playback, deleting etc.). ≥ Do not perform the following operations when the lamp illuminates. It may damage the HDD or cause a malfunction in the unit. jTurn the unit off jInsert and remove the USB cable jExpose the unit to vibrations or shock ≥ About disposing of or giving away this unit.
PAGE 13
HDCSD200&HS200EB-VQT1Y50_mst.book 13 ページ２００９年１月１５日木曜日午後７時４分 Preparation 2 Before using Parts identification and handling [HDC-SD200] 1 2 3 4 56 7 8 10 11 12 13 14 18 19 20 1 A/V 15 16 17 LCD monitor (Touch screen) (l 28, 37) ≥ It can open up to 90o. ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen.
PAGE 14
HDCSD200&HS200EB-VQT1Y50_mst.book 14 ページ２００９年１月１５日 11 Zoom buttons (l 57) ≥ These buttons function in the same manner as the zoom lever. Changing the thumbnail display and adjusting the volume can be operated. 12 Menu button [MENU] (l 29) 13 Delete button [ ] (l 87) 14 SD card open lever [OPEN] (l 25) 15 Audio-video output terminal [A/V] (l 96, 110) ≥ Use the AV cable (only the supplied cable).
PAGE 15
HDCSD200&HS200EB-VQT1Y50_mst.book 15 ページ２００９年１月１５日 30 31 32 木曜日午後７時４分 33 29 28 27 35 Recording start/stop button (l 46) Status indicator (l 26) Mode dial (l 26) Photoshot button [ ] (l 50) Zoom lever [W/T] (In recording mode) (l 57) Thumbnail display switch/Volume lever [s /VOLr] (In playback mode) (l 78) 32 Speaker 33 Internal microphones (5.1 channel support) 34 Grip belt Adjust the length of the grip belt so that it fits your hand. 34 27 28 29 30 31 1 2 3 35 Flip the belt.
PAGE 16
HDCSD200&HS200EB-VQT1Y50_mst.book 16 ページ２００９年１月１５日木曜日午後７時４分 [HDC-HS200] 1 2 3 4 5 6 7 8 9 11 12 13 14 15 19 20 21 1 A/V 16 17 18 LCD monitor (Touch screen) (l 28, 37) ≥ It can open up to 90o. ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
PAGE 17
HDCSD200&HS200EB-VQT1Y50_mst.book 17 ページ２００９年１月１５日 15 SD card open lever [OPEN] (l 25) 16 Audio-video output terminal [A/V] (l 96, 110) ≥ Use the AV cable (only the supplied cable). 17 Component terminal [COMPONENT] (l 96) 18 HDMI mini connector [HDMI] (l 96, 100) 19 Access lamp [ACCESS] (l 25) 20 Card slot (l 25) 21 SD card cover (l 25) 22 23 24 木曜日午後７時４分 Be careful about the following.
PAGE 18
HDCSD200&HS200EB-VQT1Y50_mst.book 18 ページ２００９年１月１５日 31 32 33 木曜日午後７時４分 34 30 29 28 36 Recording start/stop button (l 46) Status indicator (l 26) Mode dial (l 26) HDD access lamp [ACCESS HDD] (l 12) Photoshot button [ ] (l 50) Zoom lever [W/T] (In recording mode) (l 57) Thumbnail display switch/Volume lever [s /VOLr] (In playback mode) (l 78) 34 Internal microphones (5.1 channel support) 35 Grip belt Adjust the length of the grip belt so that it fits your hand.
PAGE 19
HDCSD200&HS200EB-VQT1Y50_mst.book 19 ページ２００９年１月１５日木曜日午後７時４分 Preparation Setup 1 Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. ≥ This unit has a function to distinguish the batteries that can be used, and the batteries (VW-VBG130/VW-VBG260/VW-VBG6) are compatible with this function. (The batteries that are not compatible to this function cannot be used.
PAGE 20
HDCSD200&HS200EB-VQT1Y50_mst.book 20 ページ２００９年１月１５日木曜日午後７時４分 ≥ We recommend using Panasonic batteries (l 9, 21). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure.
PAGE 21
HDCSD200&HS200EB-VQT1Y50_mst.book 21 ページ２００９年１月１５日木曜日午後７時４分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC/humidity: 60% HDC-SD200 Battery model number [Voltage/Capacity (minimum)] Charging time Maximum continuously recordable time Actual recordable time Supplied battery/ VW-VBG130 (optional) [7.2 V/1250 mAh] 2 h 35 min 1 h 45 min 1 h 5 min VW-VBG260 (optional) [7.2 V/2500 mAh] 4 h 40 min 3 h 25 min 2 h 5 min VW-VBG6 (optional)* [7.
PAGE 22
HDCSD200&HS200EB-VQT1Y50_mst.book 22 ページ２００９年１月１５日木曜日午後７時４分 ≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever etc. ≥ The batteries heat up after use or charging. This is not a malfunction. Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then ( ) will flash.
PAGE 23
HDCSD200&HS200EB-VQT1Y50_mst.book 23 ページ２００９年１月１５日木曜日午後７時４分 Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit.
PAGE 24
HDCSD200&HS200EB-VQT1Y50_mst.book 24 ページ２００９年１月１５日木曜日午後７時４分 Preparation Setup 2 Preparation of SD cards This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. When using an SDHC Memory Card on another device, confirm that the device supports the SDHC Memory Card. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.
PAGE 25
HDCSD200&HS200EB-VQT1Y50_mst.book 25 ページ２００９年１月１５日木曜日午後７時４分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 95) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. before proceeding with the formatting.
PAGE 26
HDCSD200&HS200EB-VQT1Y50_mst.book 26 ページ２００９年１月１５日木曜日午後７時４分 Preparation 3 Setup Selecting a mode (Turning the unit on/off) Change the mode to recording, playback or power OFF. Turn on the power by changing the mode to the lock release button A. HDC-SD200 , or while pressing HDC-HS200 OFF ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. ≥ Align with the mark B. ≥ Status indicator C.
PAGE 27
HDCSD200&HS200EB-VQT1Y50_mst.book 27 ページ２００９年１月１５日木曜日午後７時４分 Turning the power on and off with the LCD monitor When the mode is set to or is turned off when it is closed. , power is turned on when the LCD monitor is opened, and power ∫ To turn on the power HDC-SD200 HDC-HS200  A The status indicator lights. ∫ To turn off the power HDC-SD200 HDC-HS200  A The status indicator goes off. Change the mode to OFF when this unit is not being used.
PAGE 28
HDCSD200&HS200EB-VQT1Y50_mst.book 28 ページ２００９年１月１５日木曜日午後７時４分 Preparation Setup 4 How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. ∫ Touch ∫ About the operation icons Touch and release the touch screen to select icon or picture.
PAGE 29
HDCSD200&HS200EB-VQT1Y50_mst.book 29 ページ２００９年１月１５日木曜日午後７時４分 Preparation Setup 5 Using the menu screen MENU A It is recommended to hold the LCD monitor with your thumb and index finger when pressing the buttons on the LCD monitor. 1 Press the MENU button. 4 Touch the desired item to enter the setting. 5 Touch [EXIT] or press the MENU button to exit the menu setting. MENU 2 3 Touch the top menu A. Touch the submenu B. ≥ Next (previous) page can be displayed by touching / .
PAGE 30
HDCSD200&HS200EB-VQT1Y50_mst.book 30 ページ２００９年１月１５日木曜日午後７時４分 Language selection You can select the language on the screen display and the menu screen. 1 Press the MENU button, then touch [SETUP] > [LANGUAGE]. 2 Touch [English]. Menu list Part of the menu will not be used depending on the used functions. (l 131) Motion picture recording mode *1 It is not displayed when the Intelligent auto mode is on. *2 These menus are only for . *3 When the [MEDIA SELECT] is set to [SD CARD].
PAGE 31
HDCSD200&HS200EB-VQT1Y50_mst.book 31 ページ２００９年１月１５日 PICTURE (l 52) [QUALITY] (l 52) [HI-SPEED BURST]*1 (l 70) [SELF TIMER] (l 62) [FLASH] (l 62) [FLASH LEVEL]*1 (l 62) EYE]*1 (l 62) [SHTR SOUND] 午後７時４分 SETUP [PICTURE SIZE] [RED 木曜日 [DISPLAY] The screen indications are selected as shown in the illustration below. [OFF] [ON] A 0h00m00s R 1h20m 1h30m (l 71) [CLOCK SET] MEDIA SELECT*2 Media to record can be set to [HDD] or [SD CARD].
PAGE 32
HDCSD200&HS200EB-VQT1Y50_mst.book 32 ページ２００９年１月１５日木曜日午後７時４分 [ALERT SOUND] [DEMO MODE] Touch screen operation, start and stop of recording and power on/off can be confirmed with this sound. 2 Beeps for 4 times When an error occurs. Check the sentence displayed on the screen. (l 129) This item is used to start the unit demonstration.
PAGE 33
HDCSD200&HS200EB-VQT1Y50_mst.book 33 ページ２００９年１月１５日木曜日午後７時４分 Playback mode *1 When the disc playback is selected while a DVD burner (optional) is connected, or when [INTEL. SCENE] (l 81) is selected, this does not appear. *2 Only when the disc playback is selected while a DVD burner (optional) is connected, this appears. *3 These menus are only for . *4 This appears only when the [VIDEO/SD CARD] or [PICTURE/SD CARD] is selected. *5 This appears only when the [VIDEO/HDD] or [PICTURE/HDD] is selected.
PAGE 34
HDCSD200&HS200EB-VQT1Y50_mst.book 34 ページ２００９年１月１５日木曜日午後７時４分 Preparation Setup 6 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Change the mode to 1 or . Select the menu. (l 29) [SETUP] # [CLOCK SET] # [YES] 2 Touch the date or time to be set, then set the desired value using / . Changing the date and time display mode Select the menu.
PAGE 35
HDCSD200&HS200EB-VQT1Y50_mst.book 35 ページ２００９年１月１５日木曜日午後７時４分 Changing the date format Select the menu. (l 29) [SETUP] # [DATE FORMAT] # desired display style Display style Screen display [Y/M/D] 2009. 11. 15 [M/D/Y] 11 15 2009 [D/M/Y] 15. 11. 2009 ≥ The date and time function is driven by a built-in lithium battery. ≥ If the time display becomes [- -], the built-in lithium battery needs to be charged.
PAGE 36
HDCSD200&HS200EB-VQT1Y50_mst.book 36 ページ２００９年１月１５日木曜日午後７時４分 World time setting (Displaying the time of the travel destination) It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. 1 Select the menu. (l 29) [SETUP] # [SET WORLD TIME] # [YES] ≥ If the clock is not set, adjust the clock to the current time. (l 34) ≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] and proceed to Step 3.
PAGE 37
HDCSD200&HS200EB-VQT1Y50_mst.book 37 ページ２００９年１月１５日木曜日午後７時４分 Preparation Setup 7 Adjusting LCD monitor ≥ These settings will not affect the images actually recorded. LCD monitor adjustment ∫ POWER LCD This makes it easier to view the LCD monitor in bright places including outdoors. Select the menu.
PAGE 38
HDCSD200&HS200EB-VQT1Y50_mst.book 38 ページ２００９年１月１５日 Touch screen calibration Perform the touch screen calibration if a different object to the one touched is selected. 1 Select the menu. (l 29) [SETUP] # [CALIBRATION] # [YES] ≥ Touch [ENTER]. 2 Touch [r] with the supplied stylus pen and enter in calibration. ≥ Touch the [i] in the order it is displayed. (5 locations) 3 Touch [ENTER]. ≥ Calibration cannot be performed when the LCD monitor is turned 180o.
PAGE 39
HDCSD200&HS200EB-VQT1Y50_mst.book 39 ページ２００９年１月１５日木曜日午後７時４分 Preparation 8 Setup Using with the remote control Select the menu. (l 29) [SETUP] # [REMOTE CONTROL] # [ON] ≥ This function’s default setting is [ON]. ≥ [REMOTE CONTROL] can be set to [OFF] so the remote control will not be mistakenly used when not in use.
PAGE 40
HDCSD200&HS200EB-VQT1Y50_mst.book 40 ページ２００９年１月１５日 Warning Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth. If swallowed call your doctor. 木曜日午後７時４分 Operation of direction buttons/OK button 1 ∫ Remote control usable range Press a direction button. STILL ADV PAUSE STILL ADV SKIP STOP SKIP MENU OK A Remote control sensor Distance: Within approx. 5 m Angle: Approx.
PAGE 41
HDCSD200&HS200EB-VQT1Y50_mst.book 41 ページ２００９年１月１５日木曜日午後７時４分 Recording Recording (Basic) 1 Before recording ∫ Basic camera positioning ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object.    1 2 3 4 5 6 7 Hold the unit with both hands. Put your hand through the grip belt.
PAGE 42
HDCSD200&HS200EB-VQT1Y50_mst.book 42 ページ２００９年１月１５日木曜日午後７時４分 Intelligent auto mode The following modes appropriate for the condition are set just by pointing the unit to what you want to record. ≥ When this unit is purchased, the Intelligent auto mode is set to on. Intelligent auto button Press this button to switch on/off the intelligent auto mode.
PAGE 43
HDCSD200&HS200EB-VQT1Y50_mst.book 43 ページ２００９年１月１５日 ≥ Modes are selected automatically by the unit, so it may not choose desired mode depending on the recording conditions. ≥ Brightness may change suddenly or flicker when set to on. ≥ In the portrait mode, one that is bigger and close to centre of the screen will be surrounded by an orange frame. (l 67) ≥ It is recommended using a tripod in night portrait and night scenery mode. ≥ Optical image stabilizer function (l 58) is set to on in all modes.
PAGE 44
HDCSD200&HS200EB-VQT1Y50_mst.book 44 ページ２００９年１月１５日 Auto focus The lens is moved forward or backward automatically to bring the subject into focus. Auto focus has the following characteristics. jAdjusts so that the vertical lines of a subject are seen more clearly. jAttempts to bring an object with higher contrast into focus. Auto focus does not work correctly in the following situations. Record pictures in the manual focus mode.
PAGE 45
HDCSD200&HS200EB-VQT1Y50_mst.book 45 ページ 3 ２００９年１月１５日 Open the LCD monitor. 木曜日午後７時４分 Quick power on (Only when recording to an SD card) The unit is put into recording pause approx. 1.9 seconds when the mode is set to or from OFF. ≥ Start time will not shorten if there is no SD card inserted. HDC-SD200 ¬ Change the mode to or . 1 Select SD card as a media to record from the menu. (l 29) HDC-HS200 [MEDIA SELECT] # [SD CARD] 2  Select the menu.
PAGE 46
HDCSD200&HS200EB-VQT1Y50_mst.book 46 ページ２００９年１月１５日木曜日午後７時４分 Recording Recording (Basic) 2 Recording motion pictures This unit records high definition images that are compatible with the AVCHD format. Sound is recorded with the Dolby Digital 5.1 Creator. ≥ Use an SD card that can be used for motion picture recording. (l 24) ∫ When selecting media Select the menu.
PAGE 47
HDCSD200&HS200EB-VQT1Y50_mst.book 47 ページ 4 ２００９年１月１５日 Press the recording start/stop button to start recording. 5 木曜日午後７時４分 Press the recording start/stop button again to pause recording. ≥ While recording is in progress, the recording will not stop even if the LCD monitor is closed. About the compatibility of the recorded motion pictures ≥ They are not compatible with devices other than those that support AVCHD.
PAGE 48
HDCSD200&HS200EB-VQT1Y50_mst.book 48 ページ２００９年１月１５日木曜日午後７時４分 Recording modes/approximate recordable time Switch the picture quality of the motion pictures to be recorded. Select the menu.
PAGE 49
HDCSD200&HS200EB-VQT1Y50_mst.book 49 ページ２００９年１月１５日 PRE-REC 午後７時４分 Shooting guide This prevents you missing a shot. This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed. 1 木曜日 Press the PRE-REC button. PRE-REC Message is displayed when this unit is moved rapidly. Select the menu. (l 29) [RECORD SETUP] # [SHOOTING GUIDE] # [ON] ≥ This function’s default setting is [ON]. PRE-REC appears on the screen.
PAGE 50
HDCSD200&HS200EB-VQT1Y50_mst.book 50 ページ２００９年１月１５日木曜日午後７時４分 Recording Recording (Basic) 3 Recording still pictures HDC-HS200 ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the mark B. ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the status indicator B. OFF HDC-SD200 1 Change the mode to 2 Open the LCD monitor.
PAGE 51
HDCSD200&HS200EB-VQT1Y50_mst.book 51 ページ２００９年１月１５日 R3000: Focus indication: :   Press the button fully. ≥ The sound cannot be recorded while recording still pictures. ≥ If the button is pressed fully all at once, it may take time to record still pictures. ≥ It is recommended using a flash or tripod when recording still pictures in dark places because the shutter speed becomes slow. ≥ The screen will become darker when the button is pressed halfway if the shutter speed is 1/25 or slower.
PAGE 52
HDCSD200&HS200EB-VQT1Y50_mst.book 52 ページ２００９年１月１５日 Aspect ratio/picture size This allows you to select the aspect ratio of the pictures to suit printing or the playback method. The higher the number of pixels, the higher the clarity of the picture when printing. (When setting aspect ratio) Select the menu. (l 29) ≥ The number of recording pixels that can be set changes depending on selected screen aspect ratio. ≥ The recording will become longer depending on the recording pixels.
PAGE 53
HDCSD200&HS200EB-VQT1Y50_mst.book 53 ページ２００９年１月１５日 Recording still pictures in motion picture recording mode You can record still pictures even in motion picture recording mode. ¬ Change the mode to 1 . While pausing the recording, press the button halfway. (For auto focus only) 木曜日午後７時４分 ∫ Simultaneous recording (recording still pictures while recording motion pictures) You can record still pictures even while recording motion pictures. ¬ Change the mode to .
PAGE 54
HDCSD200&HS200EB-VQT1Y50_mst.book 54 ページ２００９年１月１５日木曜日午後７時４分 Number of recordable pictures (In still picture recording mode) Aspect ratio Picture size 4:3 8M 9M 3520k2640 5M 3264k2448 0.
PAGE 55
HDCSD200&HS200EB-VQT1Y50_mst.book 55 ページ２００９年１月１５日木曜日午後７時４分 3:2 Aspect ratio 10.6M 7M 4.
PAGE 56
HDCSD200&HS200EB-VQT1Y50_mst.book 56 ページ２００９年１月１５日木曜日午後７時４分 (In motion picture recording mode) Aspect ratio Picture size 16:9 8.3 M 2.
PAGE 57
HDCSD200&HS200EB-VQT1Y50_mst.book 57 ページ２００９年１月１５日木曜日午後７時４分 Recording Recording (Basic) 4 Zoom in/out function The maximum optical zoom ratio is 12k. ¬ Change the mode to or Digital zoom function . / VOL W VOL W T If the zoom magnification exceeds 12k in motion picture recording mode, then the digital zoom function will be activated. T Select the menu. (l 29) [RECORD SETUP] # [D.
PAGE 58
HDCSD200&HS200EB-VQT1Y50_mst.book 58 ページ２００９年１月１５日木曜日午後７時４分 Recording Recording (Basic) 5 Optical image stabilizer function Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬ Change the mode to or . O.I.S. Optical image stabilizer button Press this button to switch on/off the image stabilizer function. In motion picture recording mode, appears on the screen, and the image stabilizer function works all the time.
PAGE 59
HDCSD200&HS200EB-VQT1Y50_mst.book 59 ページ２００９年１月１５日木曜日午後７時４分 Recording Recording (Basic) 6 AF tracking It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking) ¬ Change the mode to 1 Touch or . . A Target frame ≥ will be displayed on the screen.
PAGE 60
HDCSD200&HS200EB-VQT1Y50_mst.book 60 ページ２００９年１月１５日木曜日午後７時４分 Recording 1 Recording (Advanced) Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. ¬ Change the mode to 1 or . Touch F to display the operation icons on the screen. 2 (e.g. Backlight compensation) Select an operation icon. F F ≥ Touch 1 at the bottom right of the screen to change the page and touch F F to display/ not-display the operation icon.
PAGE 61
HDCSD200&HS200EB-VQT1Y50_mst.book 61 ページ２００９年１月１５日木曜日午後７時４分 *1 It is not displayed in still picture recording mode. *2 It is not displayed when the intelligent auto mode is on. *3 It is not displayed in motion picture recording mode. ≥ If you turn off the power or change the mode to , colour night view, backlight compensation, self timer and tele macro functions are cancelled. ≥ If you turn off the power, the fade function is cancelled. ≥ It is possible to set from the menu.
PAGE 62
HDCSD200&HS200EB-VQT1Y50_mst.book 62 ページ Function Self-timer ２００９年１月１５日木曜日午後７時４分 Effect This is for recording still pictures using the timer. Each time the icon is selected, the indication changes by one setting in the following order: Ø10 # Ø2 # setting cancelled Ø10: Records after 10 seconds Ø2: Records after 2 seconds ≥ In motion picture recording mode, set this function from the menu.
PAGE 63
HDCSD200&HS200EB-VQT1Y50_mst.book 63 ページ２００９年１月１５日 Intelligent contrast control: ≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be clear. Intelligent exposure: ≥ If there are extremely dark parts or the brightness is insufficient, the effect may not be clear. Fade: ≥ The thumbnails of scenes recorded using fade in become black (or white).
PAGE 64
HDCSD200&HS200EB-VQT1Y50_mst.book 64 ページ２００９年１月１５日木曜日午後７時４分 Recording Recording (Advanced) 2 Function Scene mode Recording functions of menus Effect/Setting method When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ≥ Change the mode to or . Select the menu.
PAGE 65
HDCSD200&HS200EB-VQT1Y50_mst.book 65 ページ Function Guide line ２００９年１月１５日木曜日午後７時４分 Effect/Setting method You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition. ≥ Change the mode to or . ≥ The Intelligent auto mode is set to off. (l 42) Select the menu. (l 29) [RECORD SETUP] # [GUIDE LINES] # desired setting (When motion picture playback is selected while the mode is set to .
PAGE 66
HDCSD200&HS200EB-VQT1Y50_mst.book 66 ページ Function Anti-GroundShooting (AGS) ２００９年１月１５日木曜日午後７時４分 Effect/Setting method If the unit continues to be tilted upside down from the normal horizontal position while recording motion pictures, it is automatically put into recording pause. ≥ Change the mode to . Select the menu. (l 29) [RECORD SETUP] # [AGS] # [ON] Auto slow shutter You can record bright pictures even in dark places by slowing the shutter speed. ≥ Change the mode to .
PAGE 67
HDCSD200&HS200EB-VQT1Y50_mst.book 67 ページ Function Automatic face framing [OFF]: Not display [PRIMARY]: Only the prioritized face framing is displayed. [ALL]: All face detection framings are displayed. Digital cinema colour ２００９年１月１５日木曜日午後７時４分 Effect/Setting method In the intelligent auto mode, detected faces appear with frames. ≥ Change the mode to or . Select the menu. (l 29) [RECORD SETUP] # [FACE FRAMING] # desired setting ≥ This function’s default setting is [ALL].
PAGE 68
HDCSD200&HS200EB-VQT1Y50_mst.book 68 ページ Function Wind noise reduction ２００９年１月１５日木曜日午後７時４分 Effect/Setting method This is for reducing the wind noise coming into the built-in microphones depending on the wind strength. ≥ Change the mode to . ≥ The intelligent auto mode is set to off. (l 42) Select the menu. (l 29) [RECORD SETUP] # [WIND CUT] # [ON] ≥ This function’s default setting is [ON]. Microphone setup [SURROUND]: Sound is recorded with 5.1 ch surround microphone.
PAGE 69
HDCSD200&HS200EB-VQT1Y50_mst.book 69 ページ２００９年１月１５日 Function Microphone level [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETr ]/[SET]: The desired recording level can be set. AGC: Auto Gain Control 木曜日午後７時４分 Effect/Setting method When recording, the input level from the built-in microphones can be adjusted. ≥ Change the mode to . ≥ The intelligent auto mode is set to off. (l 42) 1 Select the menu. (l 29) [RECORD SETUP] # [MIC LEVEL] # [SETr 2 Touch level.
PAGE 70
HDCSD200&HS200EB-VQT1Y50_mst.book 70 ページ２００９年１月１５日 Function Hi-speed burst shooting [25 Frames/sec]: 72 still pictures are recorded continuously at the rate of 25 per second. The picture size is 2.1 M (1920k1080). [50 Frames/sec]: 180 still pictures are recorded continuously at the rate of 50 per second. The picture size is 0.9 M (1280k720). 木曜日午後７時４分 Effect/Setting method Recording is done continuously at the rate of 25 or 50 still pictures per second.
PAGE 71
VQT1Y50~Body1_mst.fm 71 ページ２００９年１月１９日 Function AF assist lamp 月曜日午後８時３１分 Effect/Setting method Illuminating the subject makes it easier for the camera to focus when recording in low light conditions that make focusing difficult. ≥ Change the mode to . ≥ The intelligent auto mode is set to off. (l 42) Select the menu. (l 29) [PICTURE] # [AF ASSIST LAMP] # [AUTO] ≥ This function’s default setting is [AUTO]. ≥ The available distance of the AF assist lamp is approx. 1.5 m.
PAGE 72
HDCSD200&HS200EB-VQT1Y50_mst.book 72 ページ２００９年１月１５日 Anti-Ground-Shooting (AGS): ≥ The AGS function may activate and cause the unit to pause the recording if you are recording a subject right above or right below you. Auto slow shutter: ≥ When the shutter speed becomes 1/25, the screen may be seen as if frames are missed and afterimages may appear. Digital cinema colour: ≥ When motion pictures recorded while this function is turned [ON] are played back with a TV not compatible with x.v.
PAGE 73
HDCSD200&HS200EB-VQT1Y50_mst.book 73 ページ２００９年１月１５日木曜日午後７時４分 Recording 3 Recording (Advanced) Manual recording Touch the operation icon to adjust white balance, shutter speed, iris and manual focus. ¬ Change the mode to or . Press the MANUAL button. ≥ MNL appears on the screen. MANUAL Perform the setting by touching the desired item to be set.
PAGE 74
HDCSD200&HS200EB-VQT1Y50_mst.book 74 ページ２００９年１月１５日木曜日午後７時４分 White balance The automatic white balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. The unit can record pictures in a natural hue if it can recognise the reference colour white. ≥ Press the MANUAL button. (l 73) 1 Touch [WB]. 2 ∫ To set the white balance manually Touch / to select white balance mode. 1 Select subject.
PAGE 75
HDCSD200&HS200EB-VQT1Y50_mst.book 75 ページ２００９年１月１５日木曜日午後７時４分 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Press the MANUAL button. (l 73) 1 Touch [SHTR] or [IRIS]. 2 Touch / to adjust settings. 1/100 100 F WB SHTR IRIS MF SHTR : Shutter speed: 1/50 to 1/8000 ≥ If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/25 and 1/8000.
PAGE 76
HDCSD200&HS200EB-VQT1Y50_mst.book 76 ページ２００９年１月１５日 Manual focus adjustment (When MF assist function is used) [RECORD SETUP] # [MF ASSIST] # [ON] ≥ This function’s default setting is [ON]. WB SHTR IRIS Touch the desired setting items. MF ≥ In manual focus mode, [AF] icon appears on the screen. 3 Select the menu. (l 29) [RECORD SETUP] # [PICTURE ADJUST] # [YES] 2 Touch [MF] icon. F Adjust the quality of the image while recording.
PAGE 77
HDCSD200&HS200EB-VQT1Y50_mst.book 77 ページ２００９年１月１５日木曜日午後７時４分 Playback Playback 1 Motion picture playback HDC-HS200 HDC-SD200 OFF ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the mark B. 1 Change the mode to 2 Touch the play mode select icon C to select desired media to be played back. .
PAGE 78
HDCSD200&HS200EB-VQT1Y50_mst.book 78 ページ 4 ２００９年１月１５日木曜日午後７時４分 ∫ Fast forward/rewind playback Select the playback operation by touching the operation icon. Touch 5 during playback to fast forward. (Touch 6 to rewind.) 0h00m00s Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. 1: Displays the direct playback bar (l 79) ≥ Operation icon disappears if no playback operation is performed for about 3 seconds.
PAGE 79
HDCSD200&HS200EB-VQT1Y50_mst.book 79 ページ２００９年１月１５日 ∫ Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Pause the playback. ≥ When the operation icon disappears, touch the screen to display the icon again. 2 Touch . (Touch to advance the frames one at a time in the reverse direction.) ≥ Normal playback is restored when you touch . ≥ When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0.5 seconds.
PAGE 80
HDCSD200&HS200EB-VQT1Y50_mst.book 80 ページ２００９年１月１５日 Creating still picture from motion picture A single frame from the recorded motion picture can be saved as a still picture. Picture size of the still picture to be recorded is 2.1 M (1920k1080). 1 Pause at the scene you want to save as a still picture during playback. 木曜日午後７時４分 Highlight&Time frame index An image of one scene is displayed as a thumbnail at set time interval.
PAGE 81
HDCSD200&HS200EB-VQT1Y50_mst.book 81 ページ２００９年１月１５日 Playing back motion pictures by date Scenes recorded on the same day can be played back in succession. 1 Touch the date select icon. 木曜日午後７時４分 Intelligent scene selection Play back the scenes excluding a portion of the scene judged to have failed to shoot due to fast movement of this unit, camera shake, or focus error. 1 Touch A Date select icon 2 Touch [INTEL. SCENE]. 2 3 Touch the scene to be played back. .  Touch the playback date.
PAGE 82
HDCSD200&HS200EB-VQT1Y50_mst.book 82 ページ２００９年１月１５日 Highlight playback Part that was recognised as clearly recorded is extracted from a long recording, and it can be played back in short time with music added. 1 Touch 木曜日午後７時４分 ∫ Scene setting 1) Touch [SELECT SCENES] or [SELECT DATE]. . 2) (When [SELECT SCENES] is selected) Touch the scene to be played back. 2 Touch [HIGHLIGHT]. 3 Touch desired item. ≥ Up to 99 scenes can be selected in succession.
PAGE 83
HDCSD200&HS200EB-VQT1Y50_mst.book 83 ページ２００９年１月１５日 ∫ Playback time setting 1) Touch the playback time to set. 木曜日午後７時４分 Repeat playback Playback of the first scene starts after playback of the last scene finishes. Select the menu. (l 29) [VIDEO SETUP] # [REPEAT PLAY] # [ON] ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even play back if the part recognised as clearly recorded is short.
PAGE 84
HDCSD200&HS200EB-VQT1Y50_mst.book 84 ページ２００９年１月１５日木曜日午後７時４分 Playback Playback 2 Still picture playback HDC-HS200 HDC-SD200 OFF ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the mark B. 1 2 Change the mode to . Touch the play mode select icon C to select desired media to be played back. ≥ Touch [PICTURE/SD CARD] to play back the SD card. Touch [PICTURE/HDD] to play back the HDD.
PAGE 85
HDCSD200&HS200EB-VQT1Y50_mst.book 85 ページ 4 ２００９年１月１５日 Select the playback operation by touching the operation icon. 1/;: Slide show (playback of the still pictures in numerical order) start/pause. 2;: Plays back the previous picture. ;1: Plays back the next picture. ∫: Stops the playback and shows the thumbnails. ≥ Operation icon disappears if no playback operation is performed for about 3 seconds. It will be displayed again if you touch the screen.
PAGE 86
HDCSD200&HS200EB-VQT1Y50_mst.book 86 ページ２００９年１月１５日 Still picture compatibility ≥ This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥ The file format of still pictures supported by this unit is JPEG. (Not all JPEG formatted files will be played back.
PAGE 87
HDCSD200&HS200EB-VQT1Y50_mst.book 87 ページ２００９年１月１５日木曜日午後７時４分 Playback 1 Editing Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to . To delete by confirming images being played back 0h00m00s Press the button while scenes or still pictures to be deleted are being played back. ≥ When the confirmation message appears, touch [YES].
PAGE 88
HDCSD200&HS200EB-VQT1Y50_mst.book 88 ページ２００９年１月１５日 (Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-4. When you stop deleting halfway Touch [CANCEL] or press the MENU button while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is cancelled cannot be restored. To complete editing Press the MENU button. ≥ You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] # [ALL SCENES] or [SELECT].
PAGE 89
HDCSD200&HS200EB-VQT1Y50_mst.book 89 ページ２００９年１月１５日木曜日午後７時４分 Playback Editing 2 Dividing a scene to delete To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. ¬ Change the mode to . 1 Touch the play mode select icon to select desired media to divide a scene. (l 77) 2 Select the menu. (l 29) [EDIT SCENE] # [DIVIDE] # [SET] 3 Touch the scene to be divided. 5 Press the MENU button to complete dividing.
PAGE 90
HDCSD200&HS200EB-VQT1Y50_mst.book 90 ページ２００９年１月１５日木曜日午後７時４分 Playback Editing 3 Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ¬ Change the mode to 1 . Select the menu. (l 29) [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT] # [YES] 2 Touch the scene/still picture to be protected.
PAGE 91
HDCSD200&HS200EB-VQT1Y50_mst.book 91 ページ２００９年１月１５日木曜日午後７時４分 Playback 4 Editing DPOF setting You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Change the mode to SD CARD].
PAGE 92
HDCSD200&HS200EB-VQT1Y50_mst.book 92 ページ２００９年１月１５日木曜日午後７時４分 Playback Editing 5 Copying between SD card and HDD [HDC-HS200] Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in this unit and HDD. Confirming remaining capacity on the copy destination ≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards following the instruction on the screen.
PAGE 93
HDCSD200&HS200EB-VQT1Y50_mst.book 93 ページ２００９年１月１５日木曜日午後７時４分 Copying ≥ If there is not much remaining capacity in the SD card, a confirmation message asking to copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored. 1 Change the mode to . ≥ Use a sufficiently charged battery or the AC adaptor. 2 4 (Only when [VIDEO]/[PICTURE] is selected in step 3) Touch the desired item. Select the menu.
PAGE 94
HDCSD200&HS200EB-VQT1Y50_mst.book 94 ページ２００９年１月１５日木曜日午後７時４分 (Only when [SELECT DATE] is selected in step 4) Touch the date to be copied. ≥ When touched, the date is selected and surrounded by red. Touch the date again to cancel the operation. ≥ Up to 99 dates can be set in succession. 6 (Only when [SELECT SCENES]/[SELECT DATE] is selected in step 4) Touch [Enter]/[ENTER]. 7 When the confirmation message appears, touch [YES].
PAGE 95
HDCSD200&HS200EB-VQT1Y50_mst.book 95 ページ２００９年１月１５日木曜日午後７時４分 Playback Editing 6 Formatting Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 103, 114) ¬ Change the mode to (l 46, 50, 77) , or , and select desired media to be formatted. Select the menu.
PAGE 96
HDCSD200&HS200EB-VQT1Y50_mst.book 96 ページ２００９年１月１５日木曜日午後７時４分 Playback With a TV 1 Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the supplied component cable and AV cable. Use of the following Panasonic HDMI mini cables is recommended to connect the unit to the HDMI terminal. 1 Connect this unit to a TV.
PAGE 97
HDCSD200&HS200EB-VQT1Y50_mst.book 97 ページ２００９年１月１５日木曜日午後７時４分 ≥ Check that the plugs are inserted as far as they go. ≥ Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other component cables except the supplied one. ≥ The component terminal is for outputting images only so be sure to also connect the AV cable. (It is not necessary to connect the yellow plug.) ≥ Do not use any other AV cables except the supplied one.
PAGE 98
HDCSD200&HS200EB-VQT1Y50_mst.book 98 ページ２００９年１月１５日 ∫ To display the on-screen information on the TV When the EXT DISPLAY button on the remote control is pressed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV. ≥ It will not display when the power is turned off. STOP 木曜日午後７時４分 ≥ When connecting with a HDMI mini cable, be sure to connect to a HDMI input terminal. Do not connect to a HDMI output terminal on other products.
PAGE 99
HDCSD200&HS200EB-VQT1Y50_mst.book 99 ページ２００９年１月１５日木曜日午後７時４分 Interlace method/progressive method i= interlace scanning is scanning the screen with half of the effective scanning lines every 1/50 seconds, where p= progressive scanning is a high density image signal that is scanning the screen with all the effective scanning lines every 1/50 seconds.
PAGE 100
HDCSD200&HS200EB-VQT1Y50_mst.book 100 ページ２００９年１月１５日木曜日午後７時４分 Playback With a TV 2 Playback using VIERA Link (HDAVI Control™) What is the VIERA Link? ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
PAGE 101
HDCSD200&HS200EB-VQT1Y50_mst.book 101 ページ 3 1) ２００９年１月１５日木曜日午後７時４分 Operate with the remote control for the TV. 2)     1) Press the button up, down, left or right to select a scene or still picture to be played back, and then press the button in the centre to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
PAGE 102
HDCSD200&HS200EB-VQT1Y50_mst.book 102 ページ２００９年１月１５日木曜日午後７時４分 ∫ Other linked operations Turning the power off: If you use the remote control for the TV to turn off the power, the power on this unit also turns off. Automatic input switching: If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel on the TV automatically switches to this unit’s screen.
PAGE 103
HDCSD200&HS200EB-VQT1Y50_mst.book 103 ページ２００９年１月１５日木曜日午後７時４分 Backup With other products 1 Connecting a DVD burner to copy to/play back a disc Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner VW-BN1 (optional) to this unit using a Mini AB USB Connection Cable (supplied with VW-BN1). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
PAGE 104
HDCSD200&HS200EB-VQT1Y50_mst.book 104 ページ 1 ２００９年１月１５日木曜日午後７時４分 Connect the AC adaptor (supplied with VW-BN1) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. 2 Connect this unit to the AC adaptor and change the mode to 3 Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with VW-BN1). A Mini AB USB Connection Cable (supplied with VW-BN1) B DVD burner (optional) ≥ Insert the plugs as far as they will go.
PAGE 105
HDCSD200&HS200EB-VQT1Y50_mst.book 105 ページ２００９年１月１５日木曜日午後７時４分 Copying to discs ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ Motion pictures and still pictures cannot both be copied to a single disc. ≥ Confirm that auto protection is [ON] before copying data. (l 109) 1 Connect this unit to the DVD burner to prepare for copying. (l 103) ≥ For users who have step 3.
PAGE 106
HDCSD200&HS200EB-VQT1Y50_mst.book 106 ページ 5 ２００９年１月１５日午後７時４分 (Only when [SELECT DATE] is selected in (Only when [VIDEO]/[PICTURE] is selected step 5) in step 3) Touch the date you want to copy. Touch the desired item. [ALL SCENES]: All motion pictures or still pictures are copied. Touch [NEXT] to proceed to step 8. [SELECT SCENES]: Some scenes are selected for copying. [SELECT DATE]: Copy by selecting the date.
PAGE 107
HDCSD200&HS200EB-VQT1Y50_mst.book 107 ページ２００９年１月１５日木曜日午後７時４分 Important Notice ≥ When connecting an optional DVD burner and this unit for copying a disc, do not insert a disc with recorded motion pictures in high definition picture quality into devices that do not support the AVCHD format. In some cases the disc may get stuck in the device. The disc will not play back on devices that do not support the AVCHD format.
PAGE 108
HDCSD200&HS200EB-VQT1Y50_mst.book 108 ページ２００９年１月１５日木曜日午後７時４分 Playing back the copied disc ≥ Only discs that have been copied by connecting this unit to the DVD burner or created with HD Writer AE 1.0 can be played back. It may not be possible to play back discs copied/played back on other devices or software.  A Mini AB USB Connection Cable (supplied with VW-BN1) 1 Connect this unit to the DVD burner to prepare for playback.
PAGE 109
HDCSD200&HS200EB-VQT1Y50_mst.book 109 ページ２００９年１月１５日木曜日午後７時４分 Managing the copied disc (Formatting, Auto protect, Displaying disc information) ≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 103) ∫ Formatting discs This is for initializing DVD-RAM and DVD-RW discs. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Back up important data on a PC etc. Select the menu.
PAGE 110
HDCSD200&HS200EB-VQT1Y50_mst.book 110 ページ２００９年１月１５日木曜日午後７時４分 Backup With other products 2 Dubbing images onto other video device Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to.
PAGE 111
HDCSD200&HS200EB-VQT1Y50_mst.book 111 ページ２００９年１月１５日木曜日午後７時４分 Backup With other products 3 With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) PictBridge is an industry standard from the Camera & Imaging Products Association (CIPA) for direct printing.
PAGE 112
HDCSD200&HS200EB-VQT1Y50_mst.book 112 ページ２００９年１月１５日 3 5 Select print source media and touch the icon. ≥ If the [PictBridge] indication does not appear or continues to flash, disconnect and then reconnect the USB cable. 4 Touch a still picture to be printed. Touch prints. 木曜日 / 午後７時４分 to set the number of ≥ Touch [ENTER] after the number of prints is set. ≥ You can set up to 9 prints. ≥ To cancel the setting, set the number of prints to [0]. ≥ Up to 99 files can be set in succession.
PAGE 113
HDCSD200&HS200EB-VQT1Y50_mst.book 113 ページ 8 ２００９年１月１５日 Touch [PAPER SIZE] to select the paper size setting. [STANDARD]: Size specific to the printer [4k5 INCH]: L size [5k7 INCH]: 2L size [4k6 INCH]: Postcard size [A4]: A4 size ≥ You cannot set paper sizes not supported on the printer. 9 Touch [PAGE LAYOUT] to select the desired layout setting. 木曜日午後７時４分 When you stop printing halfway Touch [CANCEL]. ≥ A confirmation message appears.
PAGE 114
HDCSD200&HS200EB-VQT1Y50_mst.book 114 ページ２００９年１月１５日木曜日午後７時４分 With a PC Before using 1 What you can do with a PC You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs (BD) DVD discs or SD card using HD Writer AE 1.0 for HDC, the software installed in the supplied CD-ROM. Available function Data type CD-ROM (supplied): HD Writer AE 1.
PAGE 115
HDCSD200&HS200EB-VQT1Y50_mst.book 115 ページ Available function ２００９年１月１５日木曜日 Data type Playing back on a PC Still picture Copying still pictures to a PC (l 123) 午後７時４分 Software required HD Writer AE 1.0 or Standard Windows picture viewer or a commercially available picture viewer Windows Explorer Refer to page 125 if using a Macintosh. * Refer to the operating instructions of HD Writer AE 1.0 (PDF file) for details on how to use it.
PAGE 116
HDCSD200&HS200EB-VQT1Y50_mst.book 116 ページ２００９年１月１５日木曜日午後７時４分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
PAGE 117
HDCSD200&HS200EB-VQT1Y50_mst.book 117 ページ２００９年１月１５日木曜日午後７時４分 With a PC Before using 2 Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible BD/DVD writer drive and media are necessary for writing to a BD/DVD.) ≥ Operation is not guaranteed in the following cases.
PAGE 118
HDCSD200&HS200EB-VQT1Y50_mst.book 118 ページ２００９年１月１５日木曜日午後７時４分 Necessary software Windows Vista SP1: DirectX 10.1 (already installed with Windows Vista SP1) Windows Vista: DirectX 10 (already installed with Windows Vista) Windows XP/2000: DirectX 9.0c (already installed with Windows XP SP2) ≥ If you install the software on a PC that is not compatible with DirectX 9.0c, the PC may not work properly. If you are unsure whether or not your PC is compatible, contact the maker of your PC.
PAGE 119
HDCSD200&HS200EB-VQT1Y50_mst.book 119 ページ２００９年１月１５日木曜日午後７時４分 With a PC Setup 1 Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed.
PAGE 120
HDCSD200&HS200EB-VQT1Y50_mst.book 120 ページ 7 ２００９年１月１５日 When installation is complete, some notes will appear. Check the contents, then close the window. 8 木曜日午後７時４分 ∫ Uninstalling HD Writer AE 1.0 Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program]. 2 Select [HD Writer AE 1.
PAGE 121
HDCSD200&HS200EB-VQT1Y50_mst.book 121 ページ２００９年１月１５日木曜日午後７時４分 With a PC Setup 2 Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 Connect this unit to the AC adaptor. ≥ It is possible to use it connected to the PC with the batteries only. 2 Turn on the unit. ≥ This function is available in all modes. 3 Connect this unit to a PC. The USB function selection screen will appear.
PAGE 122
HDCSD200&HS200EB-VQT1Y50_mst.book 122 ページ２００９年１月１５日 ∫ If the driver has not been recognised properly Use the following methods to enable it to be recognised. Method 1: Turn off the unit and your PC once and try verifying again. Method 2: Remove the SD card and try verifying again. Method 3: Try connecting the unit to another USB port on your PC. ∫ To disconnect USB cable safely 1 2 Double click the ( ) icon in task tray displayed on the PC.
PAGE 123
HDCSD200&HS200EB-VQT1Y50_mst.book 123 ページ２００９年１月１５日木曜日午後７時４分 About the PC display When the unit is connected to a PC, it is recognised as an external drive. ≥ Removable disk (Example: ) is displayed in [My Computer (Computer)]. We recommend using HD Writer AE 1.0 to copy motion picture data. Using Windows Explorer or other programmes on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable with HD Writer AE 1.0.
PAGE 124
HDCSD200&HS200EB-VQT1Y50_mst.book 124 ページ２００９年１月１５日木曜日午後７時４分 With a PC Using with a PC 1 Starting HD Writer AE 1.0 ≥ When using HD Writer AE 1.0 on Windows XP/2000, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer AE 1.
PAGE 125
HDCSD200&HS200EB-VQT1Y50_mst.book 125 ページ２００９年１月１５日木曜日午後７時４分 With a PC Using with a PC 2 If using Macintosh ≥ HD Writer AE 1.0 is not available for Macintosh. ≥ iMovie’08 7.1.2 or later supported. For details about iMovie’08, please contact Apple Inc. ∫ Operating environment for the card reader function (mass storage) PC Mac OS Mac OS X 10.4 Mac OS X 10.5 CPU PowerPC G5 (1.
PAGE 126
HDCSD200&HS200EB-VQT1Y50_mst.book 126 ページ２００９年１月１５日木曜日午後７時４分 Others 1 Indications * Indications only World time setting (l 36) ∫ Recording indications Motion picture recording mode (l 48) Motion picture recording mode HA mode 0h00m00s A MF HG1920 1h30m R 1h20m HG mode HX mode PRE-REC HE mode 1/100 OPEN 0dB HDD recording possible status* 12:34 15. 11.
PAGE 127
HDCSD200&HS200EB-VQT1Y50_mst.
PAGE 128
HDCSD200&HS200EB-VQT1Y50_mst.book 128 ページ２００９年１月１５日 ∫ Playback indications 1 Playback (l 78, 85) ; Pause (l 78, 85) 5, 6, / Last/first scene paused 9/: Skip playback (l 78) D/E Slow motion playback (l 78) ;1/2; Frame-by-frame playback (l 79) Next/Previous still picture (l 85) 0h00m00s Playback time Accessing the card (When connected to a PC) (l 121) Accessing the HDD (When connected to a PC) (l 121)* ∫ Confirmatory indications –– (Time display) The built-in battery is low.
PAGE 129
HDCSD200&HS200EB-VQT1Y50_mst.book 129 ページ２００９年１月１５日木曜日午後７時４分 Others Indications 2 Messages Major confirmation/error messages to be indicated on the screen in text. RECOMMEND DATA BACK UP PERIODICALLY.* We recommend backing up important recorded motion pictures and still pictures periodically to a PC, DVD disc etc. to protect it. This message does not indicate that there is a problem with this unit. HDD BACKUP RECOMMENDED.* There is a possible problem with the HDD.
PAGE 130
HDCSD200&HS200EB-VQT1Y50_mst.book 130 ページ２００９年１月１５日木曜日午後７時４分 DISCONNECT USB CABLE. The unit cannot correctly establish the connection to the PC, printer. Disconnect and then reconnect the USB cable. * only About recovery If faulty management information is found, one of the following messages may appear. Be sure to follow the messages. (Repairing may take time depending on the error.) CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD) CONTROL DATA ERROR HAS BEEN DETECTED.
PAGE 131
HDCSD200&HS200EB-VQT1Y50_mst.book 131 ページ２００９年１月１５日木曜日午後７時４分 Others 1 Helpful hints Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications.
PAGE 132
HDCSD200&HS200EB-VQT1Y50_mst.
PAGE 133
HDCSD200&HS200EB-VQT1Y50_mst.book 133 ページ２００９年１月１５日木曜日午後７時４分 Others Helpful hints 2 Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. Troubleshooting Check points ≥ Charge the battery using the AC adaptor. (l 19) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ The battery is affected by ambient temperature.
PAGE 134
HDCSD200&HS200EB-VQT1Y50_mst.book 134 ページ Problem This unit cannot be operated though it is turned on. This unit does not operate normally. ２００９年１月１５日木曜日午後７時４分 Check points ≥ Turn on the power again. If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again. (Conducting the above operation while the media is being accessed may damage the data on the media.
PAGE 135
HDCSD200&HS200EB-VQT1Y50_mst.book 135 ページ２００９年１月１５日木曜日午後７時４分 Problem Check points AF tracking does not work when the object is touched. ≥ Touch the part of the object that has specific colour such as the part that is different from the surrounding. (l 59) Auto focus function does not work. ≥ Set to Intelligent auto mode to on or off. ≥ If you are trying to record a scene which is hard to bring into focus in auto focus mode, use the manual focus mode to adjust the focus.
PAGE 136
HDCSD200&HS200EB-VQT1Y50_mst.book 136 ページ２００９年１月１５日木曜日午後７時４分 Problem Check points If the SD card is inserted in another device, it is not recognised. ≥ Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card) that you inserted. Refer to the operating instructions of the device for details. Colour or brightness of the image changes, or you may see horizontal bars in the image.
PAGE 137
HDCSD200&HS200EB-VQT1Y50_mst.book 137 ページ Problem VIERA Link does not work. ２００９年１月１５日木曜日午後７時４分 Check points [Setting on this unit] ≥ Connect with a HDMI mini cable (optional). (l 100) ≥ Press the MENU button, then touch [SETUP] # [VIERA Link] # [ON]. (l 100) ≥ Turn the power to the unit off and then back on again. [Setting on other devices] ≥ Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input.
PAGE 138
HDCSD200&HS200EB-VQT1Y50_mst.book 138 ページ２００９年１月１５日木曜日午後７時４分 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit.
PAGE 139
HDCSD200&HS200EB-VQT1Y50_mst.book 139 ページ２００９年１月１５日木曜日午後７時４分 ∫ When deleting scenes 1 Scene to be deleted A The image will be still for several seconds wherever a scene was deleted. B The images of consecutive scenes where they are no deletions are played back smoothly one after another. ∫ When selected scenes are copied between an SD card and HDD or when selected scenes are copied to a disc in a connected DVD burner.
PAGE 140
HDCSD200&HS200EB-VQT1Y50_mst.book 140 ページ２００９年１月１５日木曜日午後７時４分 Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
PAGE 141
HDCSD200&HS200EB-VQT1Y50_mst.book 141 ページ２００９年１月１５日 When you are not going to use the unit for an extended time ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. When disposing of or giving away this unit, note that: ≥ Formatting and deletion simply change the file management information and cannot be used to completely erase the data in HDD of this unit. The data can be recovered using commercially available software or the like.
PAGE 142
HDCSD200&HS200EB-VQT1Y50_mst.book 142 ページ２００９年１月１５日 Do not throw old battery into fire. ≥ Heating a battery or throwing it into a fire may result in an explosion. If the operating time is very short even after the battery has been recharged, the battery has worn out. Please purchase a new battery. About the AC adaptor ≥ If the temperature of the battery is extremely high or extremely low, charging may take time or the battery may not be charged.
PAGE 143
HDCSD200&HS200EB-VQT1Y50_mst.book 143 ページ２００９年１月１５日木曜日午後７時４分 Others Specifications High Definition Video Camera Information for your safety Power source: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Power consumption: Recording: 6.4 W 7.4 W HDC-SD200 HDC-HS200 Signal system 1080/50i Recording format AVCHD format compliant Image sensor 1/4.
PAGE 144
HDCSD200&HS200EB-VQT1Y50_mst.book 144 ページ２００９年１月１５日木曜日午後７時４分 HDC-SD200 HDC-HS200 Minimum required illumination Approx. 1.6 lx (1/25 in low light mode) Approx. 1 lx with the colour night view function AV terminal video output level 1.0 Vp-p, 75 h, PAL system Component terminal video output level Y: 1.0 Vp-p, 75 h Pb: 0.7 Vp-p, 75 h Pr: 0.7 Vp-p, 75 h HDMI mini connector video output level HDMI™ (V.1.3a with x.v.
PAGE 145
HDCSD200&HS200EB-VQT1Y50_mst.book 145 ページ２００９年１月１５日木曜日午後７時４分 Motion pictures HDC-SD200 Recording media SD card HDC-HS200 SD Memory Card: 1 GB, 2 GB (FAT12 and FAT16 system compliant) SDHC Memory Card: 4 GB, 6 GB, 8 GB, 12 GB, 16 GB, 32 GB (FAT32 system compliant) HDD – Compression MPEG-4 AVC/H.264 Recording mode and transfer rate HA: Approx. 17 Mbps (VBR) HG: Approx. 13 Mbps (VBR) HX: Approx. 9 Mbps (VBR) HE: Approx. 6 Mbps (VBR) Refer to page 48 for the recordable time.
PAGE 146
VQT1Y50~IX_mst.fm 146 ページ２００９年１月２２日木曜日午後６時４分 Index ∫ Numerics ∫F 5.1 channel . . . . . . . . . . . . . . . . . . . . . . . . . .99 Fade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 76 Focus microphone . . . . . . . . . . . . . . . . . . . . 68 Formatting . . . . . . . . . . . . . . . . . . . . . . 95, 109 Frame-by-frame playback . . . . . . . .
PAGE 147
HDCSD200&HS200EB-VQT1Y50_mst.book 147 ページ２００９年１月１５日木曜日午後７時４分 ∫P ∫T PictBridge . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Picture adjustment . . . . . . . . . . . . . . . . . . . . .76 Picture quality . . . . . . . . . . . . . . . . . . . . . . . .52 Picture size . . . . . . . . . . . . . . . . . . . . . . . . . .52 Playing back motion pictures by date . . . . . .81 Playing back still pictures by date . . . . . . . . .86 Power LCD . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 148
HDCSD200&HS200EB-VQT1Y50_mst.book 148 ページ２００９年１月１５日木曜日午後７時４分 EU B VQT1Y50 F0109MA0 ( 1500 ) C Panasonic Corporation Web site: http://panasonic.