Operating Instructions

VQT2D12 (ENG)

Recording

Recording motion pictures

This unit records high definition images that are compatible with the AVCHD format.

≥ Use an SD card that can be used for motion picture recording. (l 14)

≥ Open the lens cover before turning on the power. (l 8)

1 Change the mode to .

2 Open the LCD monitor.

You cannot start recording while the LCD

monitor is closed.

≥

For users who have , proceed to step 4.

Select the media to record from

the menu.

Select whether to record motion pictures to

the SD card or the built-in memory.

≥ You cannot set the recording media for motion

pictures and still pictures separately.

4 Press the recording start/stop

button to start recording.

≥ While recording is in progress, the recording

will not stop even if the LCD monitor is closed.

5 Press the recording start/stop

button again to pause recording.

∫ Screen indications in the

recording mode

A Recording mode

B Remaining time left for recording

(When the remaining time is less than

1 minute, [R 0h00m] flashes red.)

C Recording time elapsed

Each time the unit is put into recording

pause, the counter display will be reset to

“0h00m00s”.

∫ When selecting media

Select the menu. (l 19)

[MEDIA SELECT] # [Built-in Memory] or

[SD CARD]

0h00m00s0h00m00s0h00m00s

R 1h20mR 1h20mR 1h20m

HDCSD10EP-VQT2D12_mst.book 22 ページ２００９年５月１８日　月曜日　午前１０時５０分