HDCSD10EP-VQT2D12_mst.book 1 ページ 2009年5月18日 月曜日 午前10時50分 Operating Instructions High Definition Video Camera Model No. HDC-SD10 HDC-TM10 Before use, please read these instructions completely. Please also refer to Operating Instructions (PDF format) recorded on the CD-ROM containing the Operating Instructions (supplied). You can learn about advanced operation methods and check the Troubleshooting.
HDCSD10EP-VQT2D12_mst.book 2 ページ 2009年5月18日 月曜日 午前10時50分 Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. ≥ USE ONLY THE RECOMMENDED ACCESSORIES. ≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
HDCSD10EP-VQT2D12_mst.book 3 ページ 2009年5月18日 ∫ Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
HDCSD10EP-VQT2D12_mst.book 4 ページ 2009年5月18日 These operating instructions are designed for use with models and . Pictures may be slightly different from the original. ≥ is not available in some countries. ≥ The illustrations used in these operating instructions show model , however, parts of the explanation refer to different models. ≥ Depending on the model, some functions are not available. ≥ Features may vary, so please read carefully.
HDCSD10EP-VQT2D12_mst.book 5 ページ 2009年5月18日 月曜日 午前10時50分 Contents Information for Your Safety .......................... 2 Accessories.................................................... 6 Playback [1] Motion picture playback ................... 26 [2] Still picture playback ........................ 27 Setup [1] Power supply ..................................... Charging the battery ............................ Inserting/removing the battery ............. Charging and recording time ...............
HDCSD10EP-VQT2D12_mst.book 6 ページ 2009年5月18日 月曜日 午前10時50分 Accessories Check the accessories before using this unit. Battery pack VW-VBG070 AC adaptor VSK0698 Optional accessories Some optional accessories may not be available in some countries.
HDCSD10EP-VQT2D12_mst.book 7 ページ 2009年5月18日 月曜日 午前10時50分 Preparation Before using 1 Parts identification and handling 1 23 45 6 7 8 9 18 17 161514 10 11 1 LCD monitor (Touch screen) (l 18) ≥ It can open up to 90o. ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
HDCSD10EP-VQT2D12_mst.book 8 ページ 2009年5月18日 月曜日 午前10時50分 ≥ Slide the opening/closing switch to open/close the cover. 20 21 22 23 19 19 Lens cover 20 Lens cover opening/closing switch When not using the unit, close the lens cover to protect the lens.
HDCSD10EP-VQT2D12_mst.book 9 ページ 2009年5月18日 月曜日 午前10時50分 35 Grip belt 1 Adjust the length to fit your hand. 2 Pull to adjust the length. 36 36 Tripod receptacle This is a hole for attaching the unit to the optional tripod. (For details on mounting the tripod, refer to the operating instructions for the tripod.) When carrying the unit with your hand down Pass your hand through the strap part.
HDCSD10EP-VQT2D12_mst.book 10 ページ 2009年5月18日 月曜日 午前10時50分 Preparation Setup 1 Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBG070/VW-VBG130/VW-VBG260/VW-VBG6. ≥ This unit has a function to distinguish the batteries that can be used, and the batteries (VW-VBG070/VW-VBG130/VW-VBG260/VW-VBG6) are compatible with this function. (The batteries that are not compatible to this function cannot be used.
HDCSD10EP-VQT2D12_mst.book 11 ページ 2009年5月18日 月曜日 午前10時50分 ≥ We recommend using Panasonic batteries (l 6, 12). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Open the LCD monitor and install the battery by inserting it in the direction shown in the figure.
HDCSD10EP-VQT2D12_mst.book 12 ページ 2009年5月18日 月曜日 午前10時50分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC/humidity: 60% HDC-SD10 Battery model number [Voltage/Capacity (minimum)] Charging time Maximum continuously recordable time Actual recordable time Supplied battery/ VW-VBG070 (optional) [7.2 V/725 mAh] 1 h 35 min 1 h 25 min 50 min VW-VBG130 (optional) [7.2 V/1250 mAh] 2 h 35 min 2 h 25 min 1 h 30 min VW-VBG260 (optional)* [7.
HDCSD10EP-VQT2D12_mst.book 13 ページ 2009年5月18日 月曜日 午前10時50分 Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then ( ) will flash. ≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. The actual time can vary depending on your actual use.
HDCSD10EP-VQT2D12_mst.book 14 ページ 2009年5月18日 月曜日 午前10時50分 Preparation Setup 2 Preparation of SD cards This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. When using an SDHC Memory Card on another device, confirm that the device supports the SDHC Memory Card. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.
HDCSD10EP-VQT2D12_mst.book 15 ページ 2009年5月18日 月曜日 午前10時50分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 29) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. before proceeding with the formatting.
HDCSD10EP-VQT2D12_mst.book 16 ページ 2009年5月18日 月曜日 午前10時50分 Preparation Setup 3 Turning the unit on/off You can turn the power on and off using the power button or by opening and closing the LCD monitor. Turning the power on and off with the power button Press the power button to turn on the power. To turn off the power Hold down the power button until the status indicator goes off. A The status indicator lights.
HDCSD10EP-VQT2D12_mst.book 17 ページ 2009年5月18日 月曜日 午前10時50分 Preparation Setup 4 Selecting a mode Change the mode to recording or playback. Operate the mode switch to change the mode to or .
HDCSD10EP-VQT2D12_mst.book 18 ページ 2009年5月18日 月曜日 午前10時50分 Preparation Setup 5 How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. ∫ Touch Touch and release the touch screen to select icon or picture.
HDCSD10EP-VQT2D12_mst.book 19 ページ 2009年5月18日 月曜日 午前10時50分 Preparation Setup 6 Using the menu screen ≥ Information display setting is completed when is surrounded by yellow after touching it. 4 Touch the desired item to enter the setting. 5 Touch [EXIT] or press the MENU button to exit the menu setting. A It is recommended to hold the LCD monitor with your thumb and index finger when pressing the buttons on the LCD monitor. 1 Press the MENU button. 2 Touch the top menu A.
HDCSD10EP-VQT2D12_mst.book 20 ページ 2009年5月18日 月曜日 午前10時50分 Preparation Setup 7 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Change the mode to 1 . Select the menu. (l 19) [SETUP] # [CLOCK SET] # [YES] Changing the date and time display mode Select the menu.
HDCSD10EP-VQT2D12_mst.book 21 ページ 2009年5月18日 月曜日 午前10時50分 Recording 1 Recording Before recording Intelligent auto mode The following modes appropriate for the condition are set just by pointing the unit to what you want to record. ≥ When this unit is purchased, the Intelligent auto mode is set to on. Mode Low light Scene/Effect Dark room or twilight It can record very clearly even in a dark room or twilight. Normal Other situations Contrast is adjusted automatically for clear image.
HDCSD10EP-VQT2D12_mst.book 22 ページ 2009年5月18日 月曜日 午前10時50分 Recording 2 Recording Recording motion pictures This unit records high definition images that are compatible with the AVCHD format. ≥ Use an SD card that can be used for motion picture recording. (l 14) ≥ Open the lens cover before turning on the power. (l 8) ≥ While recording is in progress, the recording will not stop even if the LCD monitor is closed. : ∫ When selecting media Select the menu.
HDCSD10EP-VQT2D12_mst.book 23 ページ 2009年5月18日 月曜日 午前10時50分 Recording Recording 3 Recording still pictures The number of pixels recorded for still pictures is [ 2.1 M 1920k1080] (16:9). Still pictures can also be recorded while recording motion pictures. ≥ Open the lens cover before turning on the power. (l 8) 1 2 Change the mode to . Open the LCD monitor. ≥ For users who have step 4. , proceed to 3 Select the media to record from the menu.
HDCSD10EP-VQT2D12_mst.book 24 ページ 2009年5月18日 月曜日 午前10時50分 Recording 4 Recording Zoom in/out function The maximum optical zoom ratio is 16k. ¬ Change the mode to Zoom mode . ヷヰロ ヸ Set the maximum optical zoom ratio. If the zoom magnification exceeds 16k, then the digital zoom function will be activated. Select the menu.
HDCSD10EP-VQT2D12_mst.book 25 ページ 2009年5月18日 月曜日 午前10時50分 Recording Recording 5 Optical image stabilizer function Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬ Change the mode to . ヰハリハヴハ Optical image stabilizer button Pressing the button changes the optical image stabilizer setting. # # OFF ≥ Set the Intelligent Auto mode to off before setting the Optical Image Stabilizer function to off.
HDCSD10EP-VQT2D12_mst.book 26 ページ 2009年5月18日 月曜日 午前10時50分 Playback Playback 1 Motion picture playback 1 Change the mode to 2 Touch the play mode select icon A to select desired media to be played back. . 4 Select the playback operation by touching the operation icon. 0h00m00s F Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. 1: Displays the direct playback bar. ≥ Touch F F to display/not-display the operation icon.
HDCSD10EP-VQT2D12_mst.book 27 ページ 2009年5月18日 月曜日 午前10時50分 Playback Playback 2 Still picture playback 1 Change the mode to 2 Touch the play mode select icon A to select desired media to be played back. . ≥ Next (previous) page can be displayed by touching / . 4 Select the playback operation by touching the operation icon. F ≥ Touch [PICTURE/SD CARD] to play back the SD card. Touch [PICTURE/Built-in Memory] to play back the built-in memory. 3 Touch the still picture to be played back.
HDCSD10EP-VQT2D12_mst.book 28 ページ 2009年5月18日 月曜日 午前10時50分 Playback 1 Editing Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to . 0h00m00s ≥ When [ALL SCENES] is selected, all the scenes or still pictures on the selected media will be deleted. When the confirmation message appears, touch [YES].
HDCSD10EP-VQT2D12_mst.book 29 ページ 2009年5月18日 月曜日 午前10時50分 Playback Editing 2 Formatting Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. ¬ Change the mode to (l 22, 26, 27) or , and select desired media to be formatted. Select the menu.
HDCSD10EP-VQT2D12_mst.book 30 ページ 2009年5月18日 月曜日 午前10時50分 Playback With a TV 1 Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the supplied component cable and AV cable. Use of the following Panasonic HDMI mini cables is recommended to connect the unit to the HDMI terminal.
HDCSD10EP-VQT2D12_mst.book 31 ページ 2009年5月18日 月曜日 午前10時50分 ≥ Check that the plugs are inserted as far as they go. ≥ Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other component cables except the supplied one. ≥ The component terminal is for outputting images only so be sure to also connect the AV cable. (It is not necessary to connect the yellow plug.) ≥ Do not use any other AV cables except the supplied one.
HDCSD10EP-VQT2D12_mst.book 32 ページ 2009年5月18日 月曜日 午前10時50分 Others Specifications High Definition Video Camera Information for your safety Power source: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Power consumption: Recording: 5.5 W 5.6 W HDC-SD10 Signal system 1080/50i Recording format AVCHD format compliant Image sensor 1/6z 1MOS image sensor Total: 1470 K Effective pixels: Motion picture: 1170 K Still picture: 1170 K Lens Auto Iris, F1.8 to F2.8 Focal length: 2.
HDCSD10EP-VQT2D12_mst.book 33 ページ 2009年5月18日 月曜日 午前10時50分 HDC-SD10 HDC-TM10 AV terminal video output level 1.0 Vp-p, 75 h, PAL system Component terminal video output level Y: 1.0 Vp-p, 75 h Pb: 0.7 Vp-p, 75 h Pr: 0.7 Vp-p, 75 h HDMI mini connector video output level HDMI™ (x.v.
HDCSD10EP-VQT2D12_mst.
HDCSD10EP-VQT2D12_mst.book 35 ページ 2009年5月18日 月曜日 午前10時50分 Others Reading the Operating Instructions (PDF format) ≥ You have practised the basic operations introduced in these operating instructions and want to progress to advanced operations. ≥ You want to check the Troubleshooting. In these kinds of situations refer to Operating Instructions (PDF format) recorded on the CDROM containing the Operating Instructions (supplied).
HDCSD10EP-VQT2D12_mst.book 36 ページ 2009年5月18日 月曜日 午前10時50分 EU Panasonic Corporation Web site: http://panasonic.