Operating instructions

ManualsBrandsPanasonic ManualsCamcordersHDCHS100

Operating Instructions

High Definition Video Camera

Model No. HDC-HS100

Before use, please read these instructions completely.

VQT1U10

until

2008/9/1

HDCHS100-VQT1U10_mst.book 1 ページ２００８年７月１１日　金曜日　午後６時２６分

Summary of content (144 pages)

PAGE 1
HDCHS100-VQT1U10_mst.book 1 ページ２００８年７月１１日金曜日午後６時２６分 Operating Instructions High Definition Video Camera Model No. HDC-HS100 Before use, please read these instructions completely.
PAGE 2
HDCHS100-VQT1U10_mst.book 2 ページ２００８年７月１１日金曜日午後６時２６分 Information for Your Safety Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic High Definition Video Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your High Definition Video Camera may look somewhat different from those shown in the illustrations in these Operating Instructions.
PAGE 3
HDCHS100-VQT1U10_mst.book 3 ページ２００８年７月１１日 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. ≥ USE ONLY THE RECOMMENDED ACCESSORIES. ≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PAGE 4
HDCHS100-VQT1U10_mst.book 4 ページ２００８年７月１１日 ∫ Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
PAGE 5
HDCHS100-VQT1U10_mst.book 5 ページ２００８年７月１１日 ∫ Licenses ≥ SDHC Logo is a trademark. ≥ “AVCHD” and the “AVCHD” Logo are trademarks of Matsushita Electric Industrial Co., Ltd. and Sony Corporation. ≥ Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ≥ HDMI, the HDMI Logo and the High-Definition Multimedia Interface are the registered trademarks or trademarks of HDMI Licensing LLC.
PAGE 6
HDCHS100-VQT1U10_mst.book 6 ページ２００８年７月１１日金曜日午後６時２６分 Contents Information for Your Safety ................. 2 Accessories .......................................... 9 Features .............................................. 10 Recording (Basic) Preparation Before using [1] Handling of HDD (Hard disk drive) ............................ 12 [2] Parts identification and handling.......................................... 13 Remote control ................................ 17 Setup [1] Power supply ........
PAGE 7
HDCHS100-VQT1U10_mst.book 7 ページ２００８年７月１１日金曜日午後６時２６分 Playback Backup Playback [1] Motion picture playback ............... Creating still picture from motion picture .................................. Playing back motion pictures by date............................................. Intelligent scene selection ............... Repeat playback.............................. Resuming the previous playback..... [2] Still picture playback..................... Playing back still pictures by date....
PAGE 8
HDCHS100-VQT1U10_mst.book 8 ページ２００８年７月１１日 ∫ Sales and Support Information Customer Care Centre ≥ For customers within the UK: 0844 844 3852 ≥ For customers within the Republic of lreland: 01 289 8333 ≥ Visit our website for product information ≥ E-mail: customer.care@panasonic.co.
PAGE 9
HDCHS100-VQT1U10_mst.book 9 ページ２００８年７月１１日金曜日午後６時２６分 Accessories Check the accessories before using this unit. Battery pack VW-VBG130 Optional accessories Some optional accessories may not be available in some countries.
PAGE 10
HDCHS100-VQT1U10_mst.book 10 ページ２００８年７月１１日金曜日午後６時２６分 Features ∫ Very clear high definition pictures This unit can record detailed high definition images to an SD card or HDD (hard disk drive).  High definition images (1920k1080)* A Number of available scan lines 1080  Standard images (720k576) B Number of available scan lines 576 High definition images ≥ The still pictures above are images for explanation purposes. * If the recording mode is HA/HG/HX.
PAGE 11
HDCHS100-VQT1U10_mst.
PAGE 12
HDCHS100-VQT1U10_mst.book 12 ページ Before using 1 ２００８年７月１１日金曜日午後６時２６分 Handling of HDD (Hard disk drive) The unit is equipped with the built-in 60 GB* HDD. While the HDD is capable of storing a large amount of data, there are a few things to look out for. When using this component, pay attention to the following points. * The usable HDD space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes.
PAGE 13
HDCHS100-VQT1U10_mst.book 13 ページ Before using 2 ２００８年７月１１日金曜日午後６時２６分 Parts identification and handling 3 456 7 8 9 2 10 11 1 20 19 16 17 18 1 LCD monitor open part 2 LCD monitor (l 31) Pull the LCD monitor out in the direction of the arrow with your fingers. AV/ 14 15 12 13 Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
PAGE 14
HDCHS100-VQT1U10_mst.book 14 ページ２００８年７月１１日 7 8 9 10 11 12 13 14 Intelligent auto button [iA] (l 46) PRE-REC button [PRE-REC] (l 40) Menu button [MENU] (l 25) Battery holder (l 19) DC input terminal [DC IN] (l 21) USB terminal [ ] (l 96, 103, 113) HDMI mini connector [HDMI] (l 88, 93) Audio-video/headphone output terminal [AV/ ] (l 27, 51, 88, 102) ≥ Use the AV cable (only the supplied cable) or headphones. ≥ Setup the [AV JACK] in the menu when the headphones are used.
PAGE 15
HDCHS100-VQT1U10_mst.book 15 ページ２００８年７月１１日 Attaching the lens cap (Included in the Filter Kit (VW-LF37WE; optional)) ≥ When the filter kit (VW-LF37WE; optional) is used, protect the lens surface while the unit is not used with the lens cap supplied with the filter kit. 金曜日午後６時２６分 30 Microphone terminal [MIC] ≥ A compatible plug-in powered microphone can be used as an external microphone. ≥ Audio will be stereo (2 ch) with the external microphone input.
PAGE 16
HDCHS100-VQT1U10_mst.book 16 ページ２００８年７月１１日 40 Accessory shoe ≥ The video DC light/VW-LDC103E (optional) should be mounted here. 金曜日午後６時２６分 45 Tripod receptacle This is a hole for attaching the unit to the optional tripod. (For details on mounting the tripod, refer to the operating instructions for the tripod.) A Camera base 41 Internal microphones (5.1 channel support) 42 Grip belt Adjust the length of the grip belt so that it fits your hand. 1 2 3 43 Flip the belt. Adjust the length.
PAGE 17
HDCHS100-VQT1U10_mst.
PAGE 18
HDCHS100-VQT1U10_mst.book 18 ページ Setup 1 ２００８年７月１１日金曜日午後６時２６分 Power supply ∫ About batteries that you can use with this unit The Panasonic battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. VW-VBG130/VW-VBG260/VW-VBG6 come with a function to check whether the battery and unit can be safely used together. ≥ To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.
PAGE 19
HDCHS100-VQT1U10_mst.book 19 ページ２００８年７月１１日金曜日午後６時２６分 ≥ We recommend using Panasonic batteries (l 9, 20). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure.
PAGE 20
HDCHS100-VQT1U10_mst.
PAGE 21
HDCHS100-VQT1U10_mst.book 21 ページ２００８年７月１１日金曜日午後６時２６分 Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then ( ) will flash. ≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. The actual time can vary depending on your actual use.
PAGE 22
HDCHS100-VQT1U10_mst.book 22 ページ Setup 2 ２００８年７月１１日金曜日午後６時２６分 Preparation of SD cards This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. You cannot use SDHC Memory Cards on devices that are only compatible with SD Memory Cards. When using an SDHC Memory Card on another device, confirm that the device supports the SDHC Memory Card. Cards that you can use with this unit Card type Capacity SD Memory Card 8 MB 16 MB Cannot be used.
PAGE 23
HDCHS100-VQT1U10_mst.book 23 ページ２００８年７月１１日金曜日午後６時２６分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 87) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. before proceeding with the formatting.
PAGE 24
HDCHS100-VQT1U10_mst.book 24 ページ 3 Setup ２００８年７月１１日金曜日午後６時２６分 Selecting a mode (Turning the unit on/off) Rotate the mode dial to switch to recording, playback or power OFF. Turn on the power by turning the mode dial to lock release button A. or while pressing the ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. ≥ Align with the status indicator B. The status indicator lights and the power turns on.
PAGE 25
HDCHS100-VQT1U10_mst.book 25 ページ Setup 4 ２００８年７月１１日金曜日午後６時２６分 Using the menu screen Operate the displayed menu screens with the cursor button. MENU 1 Press the MENU button. MENU ≥ The menu displayed differs depending on the position of the mode dial. 2 ≥ Descriptions of submenus and current settings on menus are displayed scrolling at the bottom of the screen. 4 Select the top menu A and move the cursor button right or press the cursor button.
PAGE 26
HDCHS100-VQT1U10_mst.book 26 ページ２００８年７月１１日金曜日午後６時２６分 Language selection You can select the language on the screen display and the menu screen. 1 Press the MENU button, then select [LANGUAGE] and press the cursor button. 2 Select [English] and press the cursor button. Menu list Recording mode *1 It is not displayed when the AUTO/MANUAL switch is set to AUTO. *2 It is not displayed when the intelligent auto mode is set to [ON].
PAGE 27
HDCHS100-VQT1U10_mst.book 27 ページ２００８年７月１１日 ∫ [SETUP] [CLOCK SET] (l 29) [DISPLAY] The screen indications are selected as shown in the illustration below. [OFF] [ON] 1h30m R 1h20m [DATE/TIME] (l 29) [DATE FORMAT] (l 29) [POWER SAVE] [OFF]: The power saving function is not activated. [5 MINUTES]: When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life.
PAGE 28
HDCHS100-VQT1U10_mst.book 28 ページ２００８年７月１１日金曜日午後６時２６分 Playback mode *1 When the disc playback tab [ ] is selected while a DVD burner (optional) is connected, or when [INTEL. SCENE] (l 74) is selected, this does not appear. *2 Only when the disc playback tab [ ] is selected while a DVD burner (optional) is connected, this appears. *3 This appears only when the card playback tab [ ] is selected. *4 This appears only when the HDD playback tab [ ] is selected.
PAGE 29
HDCHS100-VQT1U10_mst.book 29 ページ Setup 5 ２００８年７月１１日金曜日午後６時２６分 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Rotate the mode dial to select 1 . [DATE] [D/T] Select the menu. (l 25) [SETUP] # [CLOCK SET] # [YES] 15. 11. 2008 15. 11. 2008 12:34 [OFF] 2 Select the date or time to be set, then set the desired value with the cursor button.
PAGE 30
HDCHS100-VQT1U10_mst.book 30 ページ２００８年７月１１日金曜日午後６時２６分 World time setting (Displaying the time of the travel destination) It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. 1 Select the menu. (l 25) [BASIC] # [SET WORLD TIME] # [YES] ≥ If the clock is not set, adjust the clock to the current time. (l 29) ≥ When the [HOME] (your home region) is not set, such as the time for the initial settings, the message appears.
PAGE 31
HDCHS100-VQT1U10_mst.book 31 ページ Setup 6 ２００８年７月１１日金曜日午後６時２６分 Adjusting LCD monitor/ viewfinder ≥ These settings will not affect the images actually recorded. ≥ When the [POWER LCD], [LCD SET] or [LCD AI] is set, set the LCD/EVF select switch to LCD. When the [EVF SET] is set or the viewfinder field of view is corrected, set the LCD/EVF select switch to EVF.
PAGE 32
HDCHS100-VQT1U10_mst.book 32 ページ２００８年７月１１日 Changing the picture quality on the LCD monitor 1 2 Set the AUTO/MANUAL switch to MANUAL (l 59) 金曜日午後６時２６分 Recording showing the contents to a partner ¬ Rotate the mode dial to select . Rotate the LCD monitor towards the lens side. Select the menu. (l 25) [SETUP] # [LCD AI] # [DYNAMIC] or [NORMAL] [DYNAMIC]: The image on the LCD monitor becomes clear and vivid. Optimum contrast and brightness are set depending on the scenes recorded.
PAGE 33
HDCHS100-VQT1U10_mst.
PAGE 34
HDCHS100-VQT1U10_mst.book 34 ページ Recording (Basic) 1 ２００８年７月１１日金曜日午後６時２６分 Before recording ∫ Basic camera positioning ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 Do not cover the microphones A.
PAGE 35
HDCHS100-VQT1U10_mst.book 35 ページ２００８年７月１１日 About auto mode AUTO MANUAL FOCUS/ZOOM Colour balance (white balance) and focusing are adjusted automatically. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (The shutter speed is adjusted to a maximum of 1/250 in recording mode.
PAGE 36
HDCHS100-VQT1U10_mst.book 36 ページ２００８年７月１１日 Quick start This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is reopened. ≥ When in quick start standby mode about 70% of the power used in recording pause mode is being consumed, so the recording time will be reduced. 1 . Set the LCD/EVF select switch to LCD. (l 31) 2 Select the menu. (l 25) ¬ Rotate the mode dial to select [SETUP] # [QUICK START] # [ON] 3 Close the LCD monitor while the mode dial is set to .
PAGE 37
HDCHS100-VQT1U10_mst.book 37 ページ Recording (Basic) 2 ２００８年７月１１日金曜日午後６時２６分 Recording motion pictures This unit records high definition images that are compatible with the AVCHD format on an SD card or HDD. Sound is recorded with the Dolby Digital 5.1 Creator. 0h00m00s R1h20m ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the status indicator B. 1 Rotate the mode dial to select .
PAGE 38
HDCHS100-VQT1U10_mst.book 38 ページ２００８年７月１１日金曜日午後６時２６分 About the compatibility of the recorded motion pictures ≥ They are not compatible with devices other than those that support AVCHD. Images cannot be played with equipment that does not support AVCHD (ordinary DVD recorders). Confirm that your equipment supports AVCHD by referring to the operating instructions. ≥ There are some cases where the recorded motion pictures cannot be played back, even if the device supports AVCHD.
PAGE 39
HDCHS100-VQT1U10_mst.book 39 ページ２００８年７月１１日金曜日午後６時２６分 Recording modes/approximate recordable time Switch the picture quality of the motion pictures to be recorded. Select the menu.
PAGE 40
HDCHS100-VQT1U10_mst.book 40 ページ２００８年７月１１日 PRE-REC This prevents you missing a shot. This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed. 1 Press the PRE-REC button. PRE-REC 金曜日午後６時２６分 ≥ When the recording start/stop button is pressed, image shake and operation sound may be recorded.
PAGE 41
HDCHS100-VQT1U10_mst.book 41 ページ Recording (Basic) 3 ２００８年７月１１日金曜日午後６時２６分 Recording still pictures The number of pixels recorded for still pictures is [ 2.1M 1920k1080] (16:9). Still pictures can also be recorded while recording motion pictures. ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the status indicator B. 1 Rotate the mode dial to select . 2 Set the LCD/EVF select switch to LCD or EVF.
PAGE 42
HDCHS100-VQT1U10_mst.book 42 ページ 5 Press the ２００８年７月１１日 button fully. ≥ In order to take better still pictures, the screen will brighten when the button is fully pressed. 金曜日午後６時２６分 ∫ About the screen indications when the button is pressed To record still pictures clearly ≥ While recording motion pictures or during the PRE-REC operation, the following arrangements are applied so that motion picture recording takes preference over still picture recording.
PAGE 43
HDCHS100-VQT1U10_mst.book 43 ページ２００８年７月１１日 ∫ About the focus indication ≥ The focus indication indicates the status of the auto focus. ≥ The focus indication does not appear in manual focus mode. ≥ You can record still pictures even if the focus indication does not appear, but pictures may be recorded without being focused. ≥ The focus indication does not appear or has difficulty focusing in the following cases. jWhen the zoom magnification is high. jWhen the unit is shaken. jWhen the subject is moving.
PAGE 44
HDCHS100-VQT1U10_mst.book 44 ページ Recording (Basic) 4 ２００８年７月１１日午後６時２６分 Zoom in/out function The maximum optical zoom ratio is 12k. ¬ Rotate the mode dial to select . VOL W 金曜日 T when operating with the remote control.) When the zoom speed is high, the subject may not be focused easily. ≥ Zoom can also be operated using the multi manual ring. (l 66) Digital zoom function If the zoom magnification exceeds 12k, then the digital zoom function will be activated.
PAGE 45
HDCHS100-VQT1U10_mst.book 45 ページ Recording (Basic) 5 ２００８年７月１１日金曜日午後６時２６分 Optical image stabilizer function Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬ Rotate the mode dial to select . O.I.S. Optical image stabilizer button Press this button to switch on/off the image stabilizer function. ≥[ ] appears on the screen. O.I.S.: Optical Image Stabilizer ≥ This function’s default setting is [ON].
PAGE 46
HDCHS100-VQT1U10_mst.book 46 ページ 6 Recording (Basic) ２００８年７月１１日金曜日午後６時２６分 Intelligent auto mode It will make an optimal setting automatically depending on the objects and recording conditions. ¬ Set the mode dial to , and set the AUTO/MANUAL switch to AUTO (l 35) AUTO Intelligent auto button Press this button to switch on/off the intelligent auto mode. MANUAL FOCUS/ZOOM It is automatically set to the following modes depending on the objects and recording conditions.
PAGE 47
HDCHS100-VQT1U10_mst.book 47 ページ Recording (Advanced) 1 ２００８年７月１１日金曜日午後６時２６分 Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. ¬ Rotate the mode dial to select 1 . Press the cursor button, and icons will be displayed on the screen. ≥ The indication changes each time the cursor button is moved down. ≥ The operation icon appears or disappears each time the cursor button is pressed. 2 (e.g.
PAGE 48
HDCHS100-VQT1U10_mst.book 48 ページ Tele macro*1 ２００８年７月１１日金曜日午後６時２６分 Headphone volume adjustment*3 *1 It is not displayed while recording. *2 It is not displayed when the intelligent auto mode is [ON]. *3 It is displayed only when [AV JACK] is set to [PHONE]. ≥ If you turn off the power or set the mode dial to , help mode, colour night view, backlight compensation, self timer and tele macro functions are cancelled. ≥ If you turn off the power, the fade function is cancelled.
PAGE 49
HDCHS100-VQT1U10_mst.book 49 ページ Function Self-timer ２００８年７月１１日金曜日午後６時２６分 Effect This is for recording still pictures using the timer. Each time the [ ] icon is selected, the indication changes by one setting in the following order: [Ø10] # [Ø2] # setting cancelled Ø10: Records after 10 seconds Ø2: Records after 2 seconds ≥ When the button is pressed, a still picture is recorded after the [Ø10] or [Ø2] display and the recording lamp flashes for the time which has been set.
PAGE 50
HDCHS100-VQT1U10_mst.book 50 ページ Function Automatic face detection ２００８年７月１１日金曜日午後６時２６分 Effect Brightness, quality, and focus are adjusted automatically so the face will be recorded clearly by detecting the face when it is recorded in the dark, such as when the light is shining from behind the objects. In the automatic face detection mode, detected faces appear with frames. ≥ Up to 15 frames are indicated. Larger faces and faces nearer to the centre of the screen take preference over others.
PAGE 51
HDCHS100-VQT1U10_mst.book 51 ページ２００８年７月１１日 Function Tele macro Headphone volume adjustment 金曜日午後６時２６分 Effect This is for close-ups bringing only what you want to record into focus. By focusing only on the subject and blurring the background, the image can be impressive. ≥ The unit can focus on the subject at a distance of approx. 40 cm. ≥ If the magnification is 12k or less, then it is automatically set to 12k. Adjusts the volume of the headphone while recording.
PAGE 52
HDCHS100-VQT1U10_mst.book 52 ページ２００８年７月１１日 Soft skin mode: ≥ If the background or anything else in the scene has colours similar to the skin colour, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear. ≥ If you record a person in the distance, the face may not be recorded clearly. In this case, cancel soft skin mode or zoom in on the face (close-up) to record. Colour night view: ≥ Recorded scene is seen as if frames were missed.
PAGE 53
HDCHS100-VQT1U10_mst.book 53 ページ Recording (Advanced) 2 ２００８年７月１１日金曜日午後６時２６分 Recording functions of menus ¬ Rotate the mode dial to select . ≥ Set to [OFF] when the menus are not used. Function Guide line Effect/Setting method You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition. A [HORIZONTAL] B [GRID1] C [GRID2] ≥ The intelligent auto mode is set to [OFF].
PAGE 54
HDCHS100-VQT1U10_mst.book 54 ページ Function Microphone setup [SURROUND]: Sound is recorded with 5.1 ch surround microphone. [ZOOM MIC]: Directivity of the microphone is interlocked with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle). [FOCUS MIC]: Directivity of the centre is enhanced for recording audio near the front of the unit more clearly.
PAGE 55
HDCHS100-VQT1U10_mst.book 55 ページ２００８年７月１１日 Function HD hi-speed burst shooting 金曜日午後６時２６分 Effect/Setting method 72 still pictures are recorded at a rate of 25 per second. Use this function to record an object with fast movement. ≥ The intelligent auto mode is set to [OFF]. (l 46) 1 Select the menu. (l 25) [RECORD SETUP] # [HI-SPEED BURST] # [ON] 2 Press the button. ≥ Up to 72 still pictures can be taken in burst mode. ([ red during recording.
PAGE 56
HDCHS100-VQT1U10_mst.book 56 ページ Function Built-in flash ２００８年７月１１日金曜日午後６時２６分 Effect/Setting method When the button is pressed, the flash is activated and the picture will be recorded. Use the built-in flash in order to record still pictures in dark places. Select the menu. (l 25) [RECORD SETUP] # [FLASH] # [AUTO] or [ON] ≥ This function’s default setting is [AUTO]. ≥ When the button is pressed halfway, the flash indicator will appear in the bottom left corner of the screen.
PAGE 57
HDCHS100-VQT1U10_mst.book 57 ページ２００８年７月１１日 Function Digital cinema colour 金曜日午後６時２６分 Effect/Setting method Recording motion pictures with more vivid colours, using x.v.Colour™ technology. Select the menu. (l 25) [ADVANCED] # [Digital Cinema Colour] # [ON] ≥ For more realistic colours, use an HDMI mini cable with a TV that supports the x.v.Colour™.
PAGE 58
HDCHS100-VQT1U10_mst.book 58 ページ２００８年７月１１日 Red eye reduction: ≥ The flash is activated 2 times. Do not move until the second flash is finished. ≥ Red eye phenomenon may appear depending on the recording conditions. Auto slow shutter: ≥ If the scene is low in brightness or contrast, the subject may not be focused in on. ≥ When the shutter speed becomes 1/25, the screen may be seen as if frames are missed and afterimages may appear.
PAGE 59
HDCHS100-VQT1U10_mst.book 59 ページ Recording (Advanced) 3 ２００８年７月１１日金曜日午後６時２６分 Recording manually by setting the menu ¬ Rotate the mode dial to select . Set the AUTO/MANUAL switch to MANUAL. [ MNL ] appears on the screen. AUTO MANUAL FOCUS/ZOOM Scene mode When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. Select the menu.
PAGE 60
HDCHS100-VQT1U10_mst.book 60 ページ２００８年７月１１日 Sports mode ≥ For slow-motion playback or playback pause of recorded pictures, this mode helps diminish camera shake. ≥ During normal playback, the image movement may not look smooth. ≥ Colour or brightness of the screen might change under fluorescent light, mercury light or sodium light, etc. ≥ You may see a band of light around the object that is shining very bright, or having very high reflection.
PAGE 61
HDCHS100-VQT1U10_mst.book 61 ページ２００８年７月１１日金曜日午後６時２６分 Microphone level When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 59) 1 Select the menu. (l 25) [RECORD SETUP] # [MIC LEVEL] # [SETr ] or [SET] ≥ Set to [AUTO] to return to normal setting. [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETr ]: The desired recording level can be set.
PAGE 62
HDCHS100-VQT1U10_mst.book 62 ページ２００８年７月１１日金曜日午後６時２６分 Picture adjustment Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 59) 1 Select the menu. (l 25) [ADVANCED] # [PICTURE ADJUST] # [YES] 2 Select the item with the cursor button and press the cursor button.
PAGE 63
HDCHS100-VQT1U10_mst.book 63 ページ２００８年７月１１日金曜日午後６時２６分 Luminance Displays the luminance level of the centre of the screen (luminance display frame) in %. It makes the adjustment of the brightness of the object easier, by checking the luminance level of the object, when recording same object in different surroundings. Adjust the brightness using [IRIS]. (l 68) ≥ Set the AUTO/MANUAL switch to MANUAL. (l 59) Select the menu.
PAGE 64
HDCHS100-VQT1U10_mst.book 64 ページ２００８年７月１１日金曜日午後６時２６分 Histogram A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is displayed. It is possible to determine the exposure of the whole image by looking at the distribution in the graph. Adjust the brightness using [IRIS]. (l 68) ≥ Set the AUTO/MANUAL switch to MANUAL. (l 59) Select the menu.
PAGE 65
HDCHS100-VQT1U10_mst.book 65 ページ Recording (Advanced) 4 ２００８年７月１１日金曜日午後６時２６分 Recording manually using the multi manual ring Perform zoom operation, focus, white balance, shutter speed, and iris adjustments using the multi manual ring. ¬ Rotate the mode dial to select . Set the AUTO/MANUAL switch to MANUAL.
PAGE 66
HDCHS100-VQT1U10_mst.book 66 ページ２００８年７月１１日金曜日午後６時２６分 Zoom operation Zoom operation can be done using the multi manual ring. ≥ Move the AUTO/MANUAL switch from the MANUAL to FOCUS/ZOOM position, and display [ ]. (l 65) A side: Zoom by rotating the ring. Close-up recording (zoom in) A B side: Wide-angle recording (zoom out) ≥ The zoom speed varies depending on the speed to rotate the ring. B ≥ Auto focus is on when [ ] is displayed.
PAGE 67
HDCHS100-VQT1U10_mst.book 67 ページ２００８年７月１１日金曜日午後６時２６分 White balance The automatic white balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 59) 1 Press the camera function button and select [WHITE BALANCE] by rotating the ring. (l 65) CAM FUNC 2 Enter the selection by pressing the camera function button. 3 Select the white balance mode by rotating the ring.
PAGE 68
HDCHS100-VQT1U10_mst.book 68 ページ２００８年７月１１日金曜日午後６時２６分 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 59) 1 Press the camera function button and select [SHUTTER SPEED] or [IRIS] by rotating the ring. (l 65) CAM FUNC 2 Enter the selection by pressing the camera function button. 3 Adjust by rotating the ring.
PAGE 69
HDCHS100-VQT1U10_mst.
PAGE 70
HDCHS100-VQT1U10_mst.book 70 ページ Playback 1 ２００８年７月１１日金曜日午後６時２６分 Motion picture playback A Lock release button B Align with the status indicator. ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. 1 2 Rotate the mode dial to select . (When playing back from an SD card) Select [ ] (motion picture playback) of [ ] (card playback) tab with the cursor button.
PAGE 71
HDCHS100-VQT1U10_mst.book 71 ページ 3 ２００８年７月１１日 Select the scene to be played back and press the cursor button. G Thumbnail display H Previous page I Next page J Play mode select button K Scene number The selected scene is played back on the full screen, and the operation icon is automatically displayed on the screen. ≥ If 9 or more scenes have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or selecting / and then pressing the cursor button.
PAGE 72
HDCHS100-VQT1U10_mst.book 72 ページ２００８年７月１１日 Operating with the remote control Press the 6 or 5 button during playback. 金曜日午後６時２６分 Operating with the remote control Press the E or D button during playback. VOL SEARCH SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV ∫ Skip playback (to the start of a scene) (Operation is possible with the remote control only.) Press the : or 9 button during playback.
PAGE 73
HDCHS100-VQT1U10_mst.book 73 ページ２００８年７月１１日 Motion picture compatibility ≥ This unit is based on the AVCHD format. ≥ The video signal that can be played back on this unit is 1920k1080/50i, 1920k1080/25p or 1440k1080/50i. ≥ This unit may degrade or not play back motion pictures recorded or created on other products, and other products may degrade or not play back motion pictures recorded on this unit, even if the products support AVCHD. ≥ Sound will be heard only during normal playback.
PAGE 74
HDCHS100-VQT1U10_mst.book 74 ページ２００８年７月１１日 Playing back motion pictures by date Scenes recorded on the same day can be played back in succession. 1 Select (By date), then press the cursor button. 金曜日午後６時２６分 ≥ Even if scenes are recorded on the same day, they are grouped separately in the following cases. jWhen the number of scenes exceeds 99 jWhen the SD card or HDD is repaired jWhen the recording mode is changed from HA/HG/HX to HE* or HE to HA/HG/HX* * –1, –2...
PAGE 75
HDCHS100-VQT1U10_mst.book 75 ページ２００８年７月１１日 ≥ The following motion pictures are skipped jWhen motion pictures are recorded while moving the unit quickly jWhen the unit shakes jWhen the image contrast is too strong such as backlight jWhen scenes are too dark jWhen you record with the unit tilted, upside down, or pointing down jWhen the subject is out of focus ≥ Up to 9 sections can be skipped for a single scene. ≥ When motion pictures are skipped, the image stops momentarily.
PAGE 76
HDCHS100-VQT1U10_mst.book 76 ページ Playback 2 ２００８年７月１１日金曜日午後６時２６分 Still picture playback A Lock release button B Align with the status indicator. ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. 1 2 Rotate the mode dial to select . (When playing back from an SD card) Select [ ] (still picture playback) of [ ] (card playback) tab with the cursor button.
PAGE 77
HDCHS100-VQT1U10_mst.book 77 ページ 3 ２００８年７月１１日 Select the still picture to be played back and press the cursor button. 4 金曜日午後６時２６分 Select the playback operation with the cursor button.       G Play mode select button H Thumbnail display I Previous page J Next page K Still picture number L Folder/file name The selected still picture is played back on the full screen, and the operation icon is automatically displayed on the screen.
PAGE 78
HDCHS100-VQT1U10_mst.book 78 ページ２００８年７月１１日 Still picture compatibility ≥ This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥ The file format of still pictures supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) ≥ If a non-standard still picture is played back, the folder/file name may not be displayed.
PAGE 79
HDCHS100-VQT1U10_mst.book 79 ページ 1 Editing ２００８年７月１１日金曜日午後６時２６分 Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with delete. ¬ Rotate the mode dial to select . To delete by confirming images being played back 0h00m00s Press the button while scenes or still pictures to be deleted are being played back. ≥ When the confirmation message appears, select [YES], then press the cursor button.
PAGE 80
HDCHS100-VQT1U10_mst.book 80 ページ 3 ２００８年７月１１日 (Only when [SELECT] is selected in step 2) Select the scene/still picture to be deleted, then press the cursor button. ≥ To unselect the scene/still picture, press the cursor button again. ≥ Up to 99 scenes can be selected to be deleted. 4 (Only when [SELECT] is selected in step 2) Press the button. ≥ When the confirmation message appears, select [YES], then press the cursor button.
PAGE 81
HDCHS100-VQT1U10_mst.book 81 ページ Editing 2 ２００８年７月１１日金曜日午後６時２６分 Dividing a scene to delete To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. ¬ Select [ is set to 1 ] (motion picture playback) of [ . (l 70) Select the menu. (l 25) [EDIT SCENE] # [DIVIDE] # [SET] 2 Select the scene to be divided, then press the cursor button.
PAGE 82
HDCHS100-VQT1U10_mst.book 82 ページ Editing 3 ２００８年７月１１日金曜日午後６時２６分 Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures on an SD card or HDD, formatting the SD card or HDD will delete them.) ¬ Rotate the mode dial to select 1 . Select the menu. (l 25) [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT] # [YES] 2 Select the scene/still picture to be protected and then press the cursor button.
PAGE 83
HDCHS100-VQT1U10_mst.book 83 ページ Editing 4 ２００８年７月１１日金曜日午後６時２６分 DPOF setting You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Select [ (l 76) ] (still picture playback) of [ ∫ What is DPOF? DPOF (Digital Print Order Format) is a format which allows the user of a digital camera to define which captured images on the SD card are to be printed, together with information on the number of copies they wish to print.
PAGE 84
HDCHS100-VQT1U10_mst.book 84 ページ Editing 5 ２００８年７月１１日金曜日午後６時２６分 Copying between SD card and HDD Motion pictures and still pictures recorded with this unit can be copied between an SD card inserted in this unit and HDD. Confirming remaining capacity on the copy destination ≥ It cannot be copied if there is not enough remaining capacity on the HDD, when copying to the HDD.
PAGE 85
HDCHS100-VQT1U10_mst.book 85 ページ 3 ２００８年７月１１日 Select the item and press the cursor button. 5 金曜日午後６時２６分 (Only when [SELECT SCENES] is selected in step 4) Select the scene/still picture to be copied and press the cursor button. [VIDEO & PICTURE]: All scenes are copied in order of motion pictures, then still pictures. Proceed to step 7. [VIDEO]: Motion pictures are copied. [PICTURE]: Still pictures are copied.
PAGE 86
HDCHS100-VQT1U10_mst.book 86 ページ２００８年７月１１日 (Only when [SELECT DATE] is selected in step 4) Press the MENU button. MENU 7 When the confirmation message appears, select [YES], then press the cursor button. ≥ If more than 2 SD cards are necessary to copy, change the card following the instructions on the screen. 8 Press the MENU button when the copy complete message is displayed. ≥ The thumbnail view of the copy destination is indicated.
PAGE 87
HDCHS100-VQT1U10_mst.book 87 ページ Editing 6 ２００８年７月１１日金曜日午後６時２６分 Formatting SD cards and HDD Please be aware that if an SD card or HDD is formatted, then all the data recorded on the SD card or HDD will be erased. Back up important data on a PC, DVD disc etc. ∫ Formatting SD cards ¬ Set the mode dial to to and select [ and set the [MEDIA SELECT] to [SD CARD] (l 37), or set ] tab. (l 70) Select the menu.
PAGE 88
HDCHS100-VQT1U10_mst.book 88 ページ With a TV 1 ２００８年７月１１日金曜日午後６時２６分 Watching Video/Pictures on your TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the AC adaptor to free you from worrying about the battery running down.
PAGE 89
HDCHS100-VQT1U10_mst.book 89 ページ２００８年７月１１日金曜日午後６時２６分 ≥ Check that the plugs are inserted as far as they go. ≥ We recommend using Panasonic HDMI mini cables (optional). Part numbers: RP-CDHM15 (1.5 m), RP-CDHM30 (3.0 m) ≥ Do not use any other component cables except the supplied one. ≥ The component terminal is for outputting images only so be sure to also connect the AV cable. (It is not necessary to connect the yellow plug.) ≥ Do not use any other AV cables except the supplied one.
PAGE 90
HDCHS100-VQT1U10_mst.book 90 ページ２００８年７月１１日金曜日午後６時２６分 ∫ To watch images with a 16:9 aspect ratio on a regular TV (4:3) ∫ To display the on-screen information on the TV When playing back motion pictures or still pictures recorded on this unit with a 16:9 aspect ratio on a TV with a 4:3 aspect ratio, the images on the screen may be squeezed horizontally. In this case, change the menu setting to play back the pictures in the original aspect ratio.
PAGE 91
HDCHS100-VQT1U10_mst.book 91 ページ２００８年７月１１日金曜日午後６時２６分 Connecting with a HDMI mini cable What is HDMI? HDMI is the interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound.
PAGE 92
HDCHS100-VQT1U10_mst.book 92 ページ２００８年７月１１日金曜日午後６時２６分 Listening in 5.1 channel sound You still can listen to the 5.1 channel sound recorded from the internal microphones when this unit is connected to the 5.1 channel compatible AV amplifier or TV using the HDMI mini cable. Please read the AV amplifier and TV operating instructions for how to connect this unit to the AV amplifier and TV.
PAGE 93
HDCHS100-VQT1U10_mst.book 93 ページ With a TV 2 ２００８年７月１１日金曜日午後６時２６分 Playback using VIERA Link (HDAVI Control™) What is the VIERA Link? ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
PAGE 94
HDCHS100-VQT1U10_mst.book 94 ページ２００８年７月１１日金曜日午後６時２６分 ≥ It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 or more HDMI input terminals on the TV. ≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV for how to set etc.) ≥ If you are not using VIERA Link, set [VIERA Link] to [OFF].
PAGE 95
HDCHS100-VQT1U10_mst.
PAGE 96
HDCHS100-VQT1U10_mst.book 96 ページ With other products 1 ２００８年７月１１日金曜日午後６時２６分 Connecting a DVD burner to copy to/play back a disc Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner VW-BN1 (optional) to this unit using a Mini AB USB Connection Cable (supplied with VW-BN1). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
PAGE 97
HDCHS100-VQT1U10_mst.book 97 ページ 3 ２００８年７月１１日金曜日午後６時２６分 Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with VW-BN1). A Mini AB USB Connection Cable (supplied with VW-BN1) B DVD burner (optional) ≥ Insert the plugs as far as they will go. 4 Insert the disc in the DVD burner. 5 (When copying) Select [BURN DISC] and press the cursor button. (When playing back) Select [PLAY DISC] and press the cursor button.
PAGE 98
HDCHS100-VQT1U10_mst.book 98 ページ 3 ２００８年７月１１日 Select the item and press the cursor button. [VIDEO & PICTURE]: All scenes are copied in order of motion pictures, then still pictures. (Since motion pictures and still pictures are copied to separate discs, two or more discs are required.) Select [NEXT], press the cursor button, and proceed to step 7. [VIDEO]: Motion pictures are copied. [PICTURE]: Still pictures are copied.
PAGE 99
HDCHS100-VQT1U10_mst.book 99 ページ 7 ２００８年７月１１日金曜日午後６時２６分 ≥ When 2 or more discs are necessary for copying, follow the on-screen instructions to switch discs. ≥ Displayed number of discs is the number when new discs are used. ≥ You may need more discs than displayed number of discs when you are copying additionally to a used DVD-RAM. ≥ Eject the disc after copying is completed. Select [START], then press the cursor button.
PAGE 100
HDCHS100-VQT1U10_mst.book 100 ページ２００８年７月１１日金曜日午後６時２６分 ∫ To copy the data on a new disc successively after confirming the contents of the copied disc by playing it back Press the DISC COPY button on the playback thumbnail view to display the selection screen in Step 2, so that you can copy data again. DISC COPY ≥ The disc that was copied to can be played back by connecting this unit and a DVD burner.
PAGE 101
HDCHS100-VQT1U10_mst.book 101 ページ 3 ２００８年７月１１日金曜日午後６時２６分 Select the scene or still picture to be played back and then play it back. ≥ The playback operation is performed the same as when playing back motion pictures or still pictures. (l 70, 76) ≥ It will return to Step 5 on page 97 when [EXIT] is selected in the thumbnail screen. ≥ Press the DISC COPY button in thumbnail view to display the selection screen for copying data to a disc. The data can be copied to a new disc inserted in the DVD burner.
PAGE 102
HDCHS100-VQT1U10_mst.book 102 ページ With other products 2 ２００８年７月１１日金曜日午後６時２６分 Dubbing images onto other video device Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to. AV/ ≥ The channel set will differ depending on the terminal to which the unit is connected.
PAGE 103
HDCHS100-VQT1U10_mst.book 103 ページ With other products 3 ２００８年７月１１日金曜日午後６時２６分 With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) PictBridge is an industry standard from the Camera & Imaging Products Association (CIPA) for direct printing. It allows images to be printed directly from digital cameras to a printer, without having to connect the camera to a PC.
PAGE 104
HDCHS100-VQT1U10_mst.book 104 ページ 6 ２００８年７月１１日 Press the MENU button to display the PictBridge menus. 金曜日午後６時２６分 10 Select [PRINT] # [YES] and press the cursor button to print the pictures. MENU 7 Select the date print setting on [DATE PRINT]. ≥ Exit PictBridge by disconnecting the USB cable (supplied) after the pictures have been printed. ≥ If the printer is not capable of date printing, this setting is unavailable. 8 Select the paper size setting on [PAPER SIZE].
PAGE 105
HDCHS100-VQT1U10_mst.
PAGE 106
HDCHS100-VQT1U10_mst.book 106 ページ Before using 1 Software required CD-ROM (supplied): HD Writer 2.
PAGE 107
HDCHS100-VQT1U10_mst.book 107 ページ２００８年７月１１日 Software required 金曜日午後６時２６分 Available function Standard Windows picture viewer or a commercially available picture viewer Playing back on a PC Windows Explorer Copying still pictures to a PC (l 114) Data type Still picture Refer to page 116 if using a Macintosh. *1 Refer to the operating instructions of HD Writer 2.6E (PDF file) for details on how to use it. *2 Compatible media are SD card and discs (DVD-RAM, DVD-RW, DVD-R and DVD-R DL).
PAGE 108
HDCHS100-VQT1U10_mst.book 108 ページ２００８年７月１１日金曜日午後６時２６分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
PAGE 109
HDCHS100-VQT1U10_mst.book 109 ページ Before using 2 ２００８年７月１１日金曜日午後６時２６分 Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible DVD writer drive and media are necessary for writing to a DVD.) ≥ Operation is not guaranteed in the following cases.
PAGE 110
HDCHS100-VQT1U10_mst.book 110 ページ２００８年７月１１日金曜日午後６時２６分 Necessary software Windows Vista: DirectX 10 Windows XP/2000: DirectX 9.0c ≥ If you install the software on a PC that is not compatible with DirectX 9.0c, the PC may not work properly. If you are unsure whether or not your PC is compatible, contact the maker of your PC. Sound DirectSound Support Interface USB port [Hi-Speed USB (USB 2.
PAGE 111
HDCHS100-VQT1U10_mst.book 111 ページ Setup 1 ２００８年７月１１日金曜日午後６時２６分 Installation When installing the software, log on to your PC as the Administrator (or with a user name with equivalent authorization) or with the user name for a standard user account. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed.
PAGE 112
HDCHS100-VQT1U10_mst.book 112 ページ 5 ２００８年７月１１日 After the installation is complete, restrictions 6 金曜日午後６時２６分 Click [Finish]. are displayed. Check the contents, then close the window. The PC must be rebooted for the application to work. ∫ Uninstalling HD Writer 2.6E Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program]. 2 Select [HD Writer 2.
PAGE 113
HDCHS100-VQT1U10_mst.book 113 ページ Setup 2 ２００８年７月１１日金曜日午後６時２６分 Connection and recognition After the software applications are installed, this unit must be connected to the PC and be correctly recognised by the PC. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 Connect this unit to the AC adaptor. 2 Turn on the unit. ≥ This function is available in all modes. 3 Connect this unit to a PC. The USB function selection screen will appear.
PAGE 114
HDCHS100-VQT1U10_mst.book 114 ページ２００８年７月１１日金曜日午後６時２６分 About the PC display When the unit is connected to a PC, it is recognised as an external drive. ≥ [Removable Disk] (Example: ) is displayed in [My Computer (Computer)]. Example folder structure of an SD card: Removable Disk DCIM 100CDPFQ 101CDPFR 102CDPFS MISC PRIVATE AVCHD AVCHDTN BDMV IISVPL  We recommend using HD Writer 2.6E to copy motion picture data recorded on an SD card.
PAGE 115
HDCHS100-VQT1U10_mst.book 115 ページ Using with a PC 1 ２００８年７月１１日金曜日午後６時２６分 Starting HD Writer 2.6E ≥ When using HD Writer 2.6E on Windows XP/2000, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer 2.6E on Windows Vista, log on to your computer as Administrator (or with a login name equally authorized) or with the user name for a standard user account.
PAGE 116
HDCHS100-VQT1U10_mst.book 116 ページ Using with a PC 2 ２００８年７月１１日金曜日午後６時２６分 If using Macintosh ≥ HD Writer 2.6E is not available for Macintosh. ∫ Operating environment for the card reader function (mass storage) PC Macintosh OS Mac OS X 10.4 Mac OS X 10.5 CPU PowerPC G5 (1.8 GHz or higher) Intel Core Duo Intel Core Solo RAM 64 MB or more Interface USB port ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used.
PAGE 117
HDCHS100-VQT1U10_mst.
PAGE 118
HDCHS100-VQT1U10_mst.book 118 ページ 1 Indications ２００８年７月１１日金曜日午後６時２６分 Indications ∫ Recording indications AUTO Auto mode (l 35) Motion picture recording MNL Manual mode (l 59) 0h00m00s +1 HG1920 R 1h20m Intelligent auto mode (l 46) Normal mode Portrait mode Scenery mode Spotlight mode Low light mode 1h30m PRE-REC MF AWB 1/100 OPEN 0dB MF Manual focus (l 66) Manual zoom (l 66) 15. 11. 2008 12:34 AWB 2.
PAGE 119
HDCHS100-VQT1U10_mst.
PAGE 120
HDCHS100-VQT1U10_mst.book 120 ページ２００８年７月１１日 100-0001 Still picture folder/file name (l 77) PictBridge When a printer compatible with PictBridge is connected (l 103) 1 DPOF already set (to more than 1) (l 83) Protected motion pictures/still pictures (l 82) 2.1M Number of recording pixels for still pictures (l 43) 1920k1080 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
PAGE 121
HDCHS100-VQT1U10_mst.book 121 ページ Indications 2 ２００８年７月１１日金曜日午後６時２６分 Messages Major confirmation/error messages to be indicated on the LCD monitor or the viewfinder in text. RECOMMEND DATA BACK UP PERIODICALLY. We recommend backing up important recorded motion pictures and still pictures periodically to a PC, DVD disc etc. to protect it. This message does not indicate that there is a problem with this unit. HDD BACKUP RECOMMENDED. There is a possible problem with the HDD.
PAGE 122
HDCHS100-VQT1U10_mst.book 122 ページ２００８年７月１１日金曜日午後６時２６分 ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN. An irregularity in the unit has been detected. Restart the unit by turning off and on the power. CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE USB CABLE FROM THIS UNIT. ≥ The DVD burner is not correctly connected. Disconnect and then reconnect the Mini AB USB Connection Cable. ≥ Connect a DVD burner that is compatible with this unit. (l 96) PLEASE CHECK EXTERNAL DRIVE OR DISC.
PAGE 123
HDCHS100-VQT1U10_mst.book 123 ページ２００８年７月１１日金曜日午後６時２６分 About recovery If faulty management information is found when the HDD or an SD card is accessed, one of the following messages may appear. Be sure to follow the messages. (Repairing may take time depending on the error.) CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD) CONTROL DATA ERROR HAS BEEN DETECTED. (HDD) THUMBNAIL DATA ERROR IS DETECTED.
PAGE 124
HDCHS100-VQT1U10_mst.book 124 ページ Helpful hints 1 ２００８年７月１１日金曜日午後６時２６分 Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. Functions Motion picture recording Conditions which disable the functions ≥ When the HD hi-speed burst shooting mode is on PRE-REC Microphone setup ≥ An external microphone is used.
PAGE 125
HDCHS100-VQT1U10_mst.
PAGE 126
HDCHS100-VQT1U10_mst.book 126 ページ Helpful hints 2 Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. ２００８年７月１１日金曜日午後６時２６分 Troubleshooting Check points ≥ Charge the battery using the AC adaptor. (l 18) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Make sure the LCD monitor is opened.
PAGE 127
HDCHS100-VQT1U10_mst.book 127 ページ Problem This unit cannot be operated though it is turned on. This unit does not operate normally. ２００８年７月１１日金曜日午後６時２６分 Check points ≥ The unit will not operate unless the LCD monitor is opened when the LCD/EVF select switch is set to LCD. ≥ Turn on the power again. If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again.
PAGE 128
HDCHS100-VQT1U10_mst.book 128 ページ２００８年７月１１日金曜日午後６時２６分 Problem Check points Colour balance of images is strange when recording in a place such as a gymnasium. ≥ In a place with multiple light sources, such as a gymnasium or a hall, the auto white balance function may not operate properly. In this case, set the white balance setting to [ (Indoor mode2)]. If you cannot record clearly with the [ (Indoor mode2)], set it to [ (Manual adjustment mode)].
PAGE 129
HDCHS100-VQT1U10_mst.book 129 ページ２００８年７月１１日金曜日午後６時２６分 Problem Check points If the SD card is inserted in another device, it is not recognised. ≥ Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card) that you inserted. Refer to the operating instructions of the device for details. The indication disappears. ≥ No operation can be performed on this unit when it is connected to a PC. ≥ Turn off the power to this unit.
PAGE 130
HDCHS100-VQT1U10_mst.book 130 ページ Problem ２００８年７月１１日金曜日午後６時２６分 Check points VIERA Link does not work. ≥ Connect with a HDMI mini cable (optional). (l 93) ≥ Press the MENU button, then select [SETUP] # [VIERA Link] # [ON] with the cursor button. (l 93) ≥ Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input. (For details on how to switch input, please read the operating instructions for the TV.
PAGE 131
HDCHS100-VQT1U10_mst.book 131 ページ２００８年７月１１日金曜日午後６時２６分 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit.
PAGE 132
HDCHS100-VQT1U10_mst.book 132 ページ２００８年７月１１日金曜日午後６時２６分 ∫ When PRE-REC was used for recording 1 Normal recording 2 PRE-REC recording A The picture momentarily stops at the end of the last scene that was recorded normally before PREREC recording. ∫ When the recording mode was changed from HA/HG/HX to HE or from HE to HA/HG/HX A The picture momentarily stops where the scenes switch between HA/HG/HX and HE modes. B Playback is smooth if the same mode is used or the mode is switched among HA, HG and HX.
PAGE 133
HDCHS100-VQT1U10_mst.book 133 ページ２００８年７月１１日金曜日午後６時２６分 ∫ Example 2: When recording again after having deleted the last scene. 1 2 A B Scene to be deleted A new scene is recorded here. The image will be still for several seconds where a scene was deleted. The images of consecutive scenes where they are no deletions are played back smoothly one after another. ∫ When selected scenes are copied between an SD card and the HDD or when selected scenes are copied to a disc in a connected DVD burner.
PAGE 134
HDCHS100-VQT1U10_mst.book 134 ページ２００８年７月１１日金曜日午後６時２６分 Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
PAGE 135
HDCHS100-VQT1U10_mst.book 135 ページ２００８年７月１１日 When you are not going to use the unit for an extended time ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. When disposing of or giving away this unit, note that: ≥ Formatting and deletion simply change the file management information and cannot be used to completely erase the data in HDD of this unit. The data can be recovered using commercially available software or the like.
PAGE 136
HDCHS100-VQT1U10_mst.book 136 ページ２００８年７月１１日 About the AC adaptor ≥ If the temperature of the battery is extremely high or extremely low, charging may take time or the battery may not be charged. ≥ If the charging lamp keeps flashing, make sure that the terminals of the battery or the AC adaptor are not exposed to dirt, foreign objects or dust, then reconnect them properly.
PAGE 137
HDCHS100-VQT1U10_mst.book 137 ページ２００８年７月１１日金曜日午後６時２６分 Explanation of terms Automatic white balance White balance adjustment recognises the colour of light and adjusts so the white colour will become a purer white. The unit determines the hue of light that comes through the lens, thereby judging the recording condition, and selects the closest hue setting. This is called automatic white balance adjustment.
PAGE 138
HDCHS100-VQT1U10_mst.book 138 ページ２００８年７月１１日 Recording distant and close-up objects at the same time Since the unit focuses on whatever is at the centre of the screen, it is difficult to bring the background into focus when close-up objects are placed in focus. When recording people with distant mountains in the background, you cannot focus on both the subject which is close-up and the objects which are in the distance.
PAGE 139
HDCHS100-VQT1U10_mst.book 139 ページ２００８年７月１１日金曜日午後６時２６分 Specifications High Definition Video Camera Information for your safety Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 6.7 W Signal system 1080/50i Recording format AVCHD format compliant Image sensor 1/6z 3MOS image sensor Total: 610 Kk3 Effective pixels: Motion picture: 520 Kk3 Still picture: 520 Kk3 Lens Auto Iris, F1.8 to F2.8 Focal length: 2.95 mm to 35.
PAGE 140
HDCHS100-VQT1U10_mst.book 140 ページ２００８年７月１１日金曜日午後６時２６分 HDMI mini connector audio output 5.1 ch (AC3)/2 ch (Linear PCM) MIC input j70 dBV (Mic sensitivity j50 dB equivalent, 0 dB=1 V/Pa, 1 kHz) (Stereo mini jack) USB Reader function: SD card: Read only (No copyright protection support) HDD: Read only Hi-Speed USB (USB 2.0), USB terminal Type Mini AB PictBridge-compliant Flash Available range: Approx. 1.0 m to 2.
PAGE 141
HDCHS100-VQT1U10_mst.book 141 ページ２００８年７月１１日金曜日午後６時２６分 Still pictures Recording media SD Memory Card: 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (FAT12 and FAT16 system corresponding) SDHC Memory Card: 4 GB, 6 GB, 8 GB, 12 GB, 16 GB, 32 GB (FAT32 system corresponding) HDD: 60 GB Compression JPEG (Design rule for Camera File system, based on Exif 2.2 standard), DPOF corresponding Picture size 1920k1080 Refer to page 43 for the number of recordable pictures.
PAGE 142
HDCHS100-VQT1U10_mst.book 142 ページ２００８年７月１１日金曜日午後６時２６分 Index ∫ Numerics ∫E 5.1 channel . . . . . . . . . . . . . . . . . . . . . . . . . .92 Eyepiece corrector dial . . . . . . . . . . . . . . . . . 32 ∫A ∫F AC adaptor . . . . . . . . . . . . . . . . . . . .18, 21, 136 Accessory shoe . . . . . . . . . . . . . . . . . . . . . . .16 Anti-Ground-Shooting (AGS) . . . . . . . . . . . . .35 Auto focus . . . . . . . . . . . . . . . . . . . . . . . . . .137 Auto mode . . . . . . . . . . . . . . . . . .
PAGE 143
HDCHS100-VQT1U10_mst.book 143 ページ２００８年７月１１日金曜日午後６時２６分 ∫N ∫T Number of recordable pictures . . . . . . . . . . .43 Tele macro . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Tripod receptacle . . . . . . . . . . . . . . . . . . . . . 16 ∫O Operation icons . . . . . . . . . . . . . . . . . . . . . . .47 Optical image stabilizer . . . . . . . . . . . . . . . . .45 ∫P PictBridge . . . . . . . . . . . . . . . . . . . . . . . . . .103 Picture adjustment . . . . . . . . . . . . . . . . . . . . .
PAGE 144
HDCHS100-VQT1U10_mst.book 144 ページ２００８年７月１１日金曜日午後６時２６分 EU B VQT1U10 F0708KK0 ( 500 ) C Matsushita Electric Industrial Co., Ltd. Web site: http://panasonic.