VQT1J42ENG.book 1 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Operating Instructions High Definition Video Camera Model No. HDC-SX5P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www.
VQT1J42ENG.book 2 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your camera. Be sure to retain this manual as your convenient camera information source.
VQT1J42ENG.book 3 ページ ２００７年７月２０日 金曜日 午前１０時３６分 CLASS 1 LASER PRODUCT IEC 60825-1:2001 CAUTION This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VQT1J42ENG.book 4 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Batteries 1 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire. 2 Button-type battery (Lithium battery) ≥ Insert with poles aligned.
VQT1J42ENG.book 5 ページ ２００７年７月２０日 金曜日 午前１０時３６分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
VQT1J42ENG.book 6 ページ ２００７年７月２０日 金曜日 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
VQT1J42ENG.book 7 ページ ２００７年７月２０日 金曜日 ª Indemnity concerning recording content The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this unit, its accessories or recordable media. IMPORTANT ª Carefully observe copyright laws Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights.
VQT1J42ENG.book 8 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Contents Accessories ......................................... 10 Quick Guide ......................................... 10 Before using Features of the High Definition Video Camera ...................................... 14 Parts identification and handling ......18 Using the LCD monitor .......................21 Using the viewfinder ........................... 22 Using the remote control ....................
VQT1J42ENG.book 9 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Editing With a computer Editing scenes ..................................... 86 Before using with a computer .......... 112 Deleting scenes .......................................86 Dividing a scene to delete .......................87 Protecting scenes ....................................88 What you can do with a computer ......... 112 Contents on provided CD-ROM ............ 113 End User License Agreement ............... 114 Operating environment .....
VQT1J42ENG.book 10 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Accessories Quick Guide Check the accessories before using this unit. ª Charging the battery Battery pack VW-VBG260 AC adaptor VW-AD21PP DC cable K2GJYYC00001 AV cable K2KC4CB00024 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Put the battery on the battery Component cable K2KZ9DB00004 AC cable K2CA2CA00025 Remote control N2QAEC000023 Button-type battery CR2025 mount by aligning the mark, and then securely plug it in.
VQT1J42ENG.book 11 ページ ２００７年７月２０日 ª How to turn on the power While pressing the lock release button A, set the mode dial to or . 金曜日 午前１０時３６分 4 Push the section marked , PUSH CLOSE on the cover of the disc compartment to close the cover. ª Inserting/removing an SD card 1 Set the mode dial to OFF. 2 Open the LCD monitor and then insert/remove the SD card into/ from the card slot. ª How to turn off the power Set the mode dial to OFF. ª Recording motion pictures ª Inserting/removing a disc .
VQT1J42ENG.book 12 ページ ２００７年７月２０日 ª Recording still pictures (JPEG images) on an SD card 金曜日 午前１０時３６分 ª Motion picture playback 1 Rotate the mode dial to select 1 Rotate the mode dial to select . . OFF STD ST D HD OF F HD 2 (HD mode only) Press the cursor 2 Press the PHOTO SHOT button halfway in order to adjust focusing. (For auto focus only) button up and then select the [ ] or [ ] tab. A Motion picture playback tab 3 Select the scene to be played back.
VQT1J42ENG.book 13 ページ ２００７年７月２０日 金曜日 午前１０時３６分 ª Still picture playback (JPEG images) on an SD card 1 Rotate the mode dial to select . OFF STD HD 2 Press the cursor button up and then right to select the [ ] tab. 2 A Still picture playback tab 3 Select the file to be played back. 4 Press the cursor button. 5 Move the cursor button to operate. 1/;: Slide show (playback of the still pictures on the SD card in numerical order) start/ pause. E: Plays back the previous picture.
VQT1J42ENG.book 14 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using Before using Features of the High Definition Video Camera Very clear high definition pictures This unit can record highly detailed high definition images to an 8 cm (3z) DVD disc or an SD card. You can watch images in high-resolution HD video if you connect this unit and a high definition TV and then play back the images. (l 100) You can also record to a conventional standard picture quality 8 cm (3z) DVD disc by rotating the mode dial.
VQT1J42ENG.book 15 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using About the compatibility of discs recorded in HD mode (high definition picture quality) on this unit ≥ They are not compatible with devices other than those that support AVCHD. (Refer to the operating instructions of the device for details.) ≥ There are some cases where the recorded motion pictures cannot be played back, even if the device supports AVCHD. In such cases, play the recorded motion picture with this unit instead.
VQT1J42ENG.book 16 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using Using the remote control for the TV for playback If you connect this unit to a Panasonic TV compatible with EZ Sync™ (HDAVI Control™) A with a HDMI cable (optional) B, you can use the remote control for the TV for playback. Refer to the operating instructions of the TV for details. ≥ Pictures recorded in STD mode cannot be played back.
VQT1J42ENG.book 17 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using Saving data to a computer You can use the supplied software (HD Writer 2.0E for SX/SD) to copy data recorded on a disc or an SD card with this unit to the hard disk of the computer. A USB cable (supplied) ª What you can do with HD Writer Copying data to a computer You can copy data on a disc or an SD card to the hard disk of the computer.
VQT1J42ENG.
VQT1J42ENG.book 19 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using 32 28 29 41 43 33 30 34 35 31 36 38 39 37 42 41 Disc compartment (l 39) 42 Grip belt (l 19) 43 Outlet 40 Using grip belt 28 Inlet (cooling fan) ª About the cooling fan Adjust the belt length so it fits your hand. Adjust the belt length and the pad position. ≥ The cooling fan rotates to prevent the internal temperature rising. Take care not to cover the inlet and outlets when using this unit.
VQT1J42ENG.book 20 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using Lens hood Rotate the lens hood counter-clockwise A to remove it. In order to attach it, place into slot B, and then rotate it clockwise C. ≥ When fitting the tele conversion lens (VW-T3714H; optional) or the wide conversion lens (VW-W3707H; optional), first remove the lens hood. (Refer to the operating instructions for the tele conversion lens or the wide conversion lens.
VQT1J42ENG.book 21 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using Tripod receptacle This is a hole for attaching the unit to the optional tripod. (Please carefully read the operating instructions for how to attach the unit to the tripod.) Using the LCD monitor You can record the image while viewing it on the LCD monitor. 1 Pull the LCD monitor out in the direction of the arrow with your fingers. ≥ It can open up to 90o. ≥ When a tripod is used, you can perform operations easily using the remote control.
VQT1J42ENG.book 22 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using * means that these buttons function in the same manner as the corresponding buttons on the unit. Using the viewfinder Pull out the viewfinder. ª Install a button-type battery Install the supplied button-type battery in the remote control before using it. 1 While pressing the stopper A, pull out the battery holder. ≥ The brightness of the viewfinder (l 49) and the field of view can be adjusted.
VQT1J42ENG.book 23 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using Replace battery with Panasonic PART NO. CR2025 only. Use of another battery may present a risk of fire or explosion. Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep away from children. Do not recharge, disassemble or dispose of in fire. ª Remote control usable range The distance between the remote control and the unit’s remote control sensor A: Within approx. 5 m (16 feet) Angle: Approx.
VQT1J42ENG.book 24 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using Discs that can be used on this unit DVD-RAM 8 cm (3q) Single sided/ double sided DVD-RW 8 cm (3q) Single sided/ double sided DVD-R 8 cm (3q) Single sided/ double sided DVD-R DL 8 cm (3q) Dual layer on single side (DVD-RAM Ver. 2.1) [DVD-RW Ver. 1.1/ 2X-SPEED (2X/ 1X)] (DVD-R for General Ver. 2.0) (DVD-R for DL Ver. 3.
VQT1J42ENG.
VQT1J42ENG.book 26 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using ≥ Still pictures cannot be recorded on a disc with this unit. ≥ You cannot record or play continuously from one side of the disc to the other when using a double sided disc. You will need to eject the disc and turn it over. ≥ Discs inserted in a holder, cartridge, or caddy case cannot be used unless they are removed from the containers prior to use. ≥ It is recommended that you use Panasonic discs.
VQT1J42ENG.book 27 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using When using new DVD-RAM or DVD-RW ¬ HD mode When a brand-new DVD-RAM or DVD-RW is inserted in this unit, you have to first format the disc. See the illustration below. Move the cursor button up or down to select [YES], then press the cursor button. ¬ STD mode When using DVD-RW, select whether to record in DVD Video Recording format (VR format) or DVD-Video format (Video format) and then format the disc.
VQT1J42ENG.book 28 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using Cards that you can use with this unit Card type Capacity 8 MB, 16 MB 32 MB, 64 MB, 128 MB Motion picture recording Cannot be used. Cannot be guaranteed in operation.* Still picture recording SDHC Memory Card SD Memory Card 256 MB, 512 MB, 1 GB, 2 GB 4 GB, 8 GB Refer to “About SD cards that you can use for motion picture recording”. Can be used.
VQT1J42ENG.book 29 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using ª About SD cards that you can use for motion picture recording We recommend using SD Memory cards and SDHC Memory cards conforming to Class 2 or higher of the SD Speed Class Rating or the following SD cards made by Panasonic for motion picture recording.
VQT1J42ENG.book 30 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Before using Disc and card handling ª How to hold a disc or card Do not touch the recorded surface or the terminal surface. ≥ Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. ≥ Do not use scratch-proof protectors or covers. ≥ Do not drop, stack, or impact discs. Do not place objects on them. ≥ Do not use the following discs: jDiscs with exposed adhesive from removed stickers or labels.
VQT1J42ENG.book 31 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup ≥ Battery charging time (l 32) ≥ We recommend using Panasonic batteries (l 10, 32, 159). ≥ If you use other batteries, we cannot guarantee the performance/quality of this product. Setup Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor.
VQT1J42ENG.book 32 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup Charging and recording time ª About batteries that you can use with this unit The Panasonic battery that can be used with this unit is VW-VBG260/VW-VBG6/VW-VBG130. VW-VBG260/VW-VBG6/VW-VBG130 come with a function to check whether the battery and unit can be safely used together.
VQT1J42ENG.book 33 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup ª Recordable time ≥ The times shown in the table below are for when the temperature is 25 oC (77 oF) and the humidity is 60%. These times are approximations. The times indicate the recordable time when the viewfinder is used. The times in parentheses indicate the recordable time when the LCD monitor is used.
VQT1J42ENG.book 34 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup Battery model number Voltage/ capacity Disc* (HD mode) VW-VBG6 (optional) 7.
VQT1J42ENG.book 35 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup ª About the remaining battery capacity indication Connecting to the AC outlet The remaining battery capacity is displayed in minutes when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. 90min ≥ The display changes as the battery capacity reduces. # # # # . If there is less than 3 minutes remaining, then will become red. If the battery discharges, then will flash.
VQT1J42ENG.book 36 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup Selecting a mode (Turning the unit on/off) Rotate the mode dial to switch to recording, playback or power OFF. ≥ Rotate the mode dial slowly. Disc Recording mode (l 53) Use this to record motion pictures in standard picture quality on a disc. STD mode Playback mode (l 80) Use this to play back motion pictures recorded in standard picture quality on a disc.
VQT1J42ENG.book 37 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup When the power is turned on for the first time after changing the disc or battery, the unit carries out a recognition procedure to check that there are no problems with the disc. If you want to start using the unit as soon as you turn on the power, do the following. 1 Turn on the power. 2 After “READING DISC...” disappears from the screen, turn off the power. ≥ Depending on the condition of the disc, it may take longer than this.
VQT1J42ENG.book 38 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup Quick start When quick start is ON the battery power is still being consumed, even when the LCD monitor and the viewfinder are closed. This unit will resume recording/pause mode about 1.7 seconds after the LCD monitor or the viewfinder are reopened. ≥ When in quick start standby mode, about 70% of the power used in recording pause mode is being consumed so the recording time will be reduced. ≥ This is only activated in the following case.
VQT1J42ENG.book 39 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup Inserting/removing a disc The cover of the disc compartment will not open unless the unit has a charged battery or is connected to the AC adaptor. 1 Attach the battery or connect the B Pickup lens (Reads disc) C Press until it clicks. ≥ Be careful not to touch the recording/playback side of the disc when inserting/removing it. Removing disc While pressing down on the spindle, grasp the edge of the disc and gently lift it out. AC adaptor.
VQT1J42ENG.book 40 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup ª Identifying recording/playback sides of disc A D DV -RAM / SIDE A B A “SIDE A” mark B The opposite side is the “SIDE A” recording/ playback side. Single sided disc/dual layer on single side disc: The recording/playback side is opposite to the labelled side. Double sided disc: The “SIDE A” recording/playback side is the side opposite the side with the “SIDE A” mark. The “SIDE B” recording/playback side is the side with the “SIDE A” mark.
VQT1J42ENG.book 41 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup 3 Insert/remove the SD card into/ from the card slot. How to use the cursor button This unit has a cursor button A for selecting functions, performing operations, etc. so it is easy to operate this unit with one hand. 1/3 次へ ≥ When inserting an SD card, face the label side A upwards and press it straight in as far as it will go. ≥ When removing the SD card, press the center of the SD card and then pull it straight out.
VQT1J42ENG.book 42 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup Operations during recording ¬ Rotate the mode dial to select . Operations during playback or 1 Press the center of the cursor button, and icons will be displayed on the screen. ¬ Rotate the mode dial to select . 1 Move the cursor button up, down, left or right to select the scene to be played back and press the cursor button. ≥ The indication disappears when the center of the cursor button is pressed again.
VQT1J42ENG.book 43 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup Operation icons displayed in each mode HD Recording mode / Icon Direction Page 3 Intelligent contrast control 63 2 Fade 64 1 Help mode 46 3 MagicPix 65 2 Soft skin mode 65 1 Backlight compensation 66 Ø 3 Self-timer recording 66 ß 2 Flash 67 1 Tele macro 69 (1/3) (2/3) (3/3) Function Set the AUTO/MANUAL/FOCUS switch to MANUAL.
VQT1J42ENG.book 44 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup STD Recording mode 1/2 NEXT 2/2 NEXT Icon (1/2) (2/2) 3/3 NEXT 4/4 NEXT Direction Function Page 3 Backlight compensation 66 2 Fade 64 1 Help mode 46 3 MagicPix 65 2 Soft skin mode 65 1 Tele macro 69 Set the AUTO/MANUAL/FOCUS switch to MANUAL. In manual mode [MANUAL] (3/3) 3 White balance 76 2 Iris or gain value 77 1 Shutter speed 77 Set the AUTO/MANUAL/FOCUS switch to FOCUS.
VQT1J42ENG.
VQT1J42ENG.book 46 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup To exit the help mode Help mode The help mode explains the operation icons displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in recording mode. ¬ Rotate the mode dial to select . Press the MENU button or select [END] (HD mode)/[EXIT] (STD mode). or 1 Press the cursor button to display the icon. ≥ When the help mode is used, functions cannot be set. ≥ When the help mode is used, motion pictures and still pictures cannot be recorded.
VQT1J42ENG.book 47 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup Using the menu screen Refer to “Menus and Indications” (l 128) for information about the menus. 4 Move the cursor button up or down in order to select the submenu item. 1 While stopped, press the MENU button. MENU C Current settings on menus The menu displayed differs depending on the position of the mode dial. ≥ Do not switch the mode dial when the menu is displayed. 5 Move the cursor button right or press the cursor button.
VQT1J42ENG.book 48 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup To exit the menu screen Press the MENU button. MENU ≥ The menu screen does not appear during recording or playing. You cannot start other operations while the menu screen is displayed. Remote control operation The menu screen transition is the same as when the buttons on the main unit are used. 1 Press the MENU button.
VQT1J42ENG.book 49 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Setup Changing the date and time display style Press the MENU button, then select [SETUP] # [DATE/TIME] # desired display style and press the cursor button. ≥ You can also show or change the date and time display by repeatedly pressing the DATE/ TIME button on the remote control.
VQT1J42ENG.book 50 ページ ２００７年７月２０日 金曜日 Setup ≥ These settings will not affect the images actually recorded. ≥ The screen displayed on the LCD monitor is smaller in STD mode. ª In order to increase the brightness of the entire LCD monitor Press the POWER LCD EXTRA button. POWER LCD EXTRA The [ +1 ] indication appears on the LCD monitor.
VQT1J42ENG.book 51 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Recording Before recording First, format the SD card or the disc if one which has been used on another device is going to be used for the first time on this unit. (l 93, 94) When the SD card or the disc is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC or other device before proceeding with the formatting. We recommend using HD Writer 2.
VQT1J42ENG.book 52 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording ª About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, color balance (white balance) and focusing will be adjusted automatically. AUTO MANUAL FOCUS jAutomatic white balance (l 154) jAuto focus (l 155) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (The shutter speed is adjusted to a maximum of 1/250 in recording mode.
VQT1J42ENG.book 53 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Recording motion pictures ＨＤ ＨＤ ＲＡＭ ＲＡＭ -ＲＷ ＨＤ ＨＤ -Ｒ -Ｒ ＤＬ -Ｒ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ VIDEO To end the recording -Ｒ ＤＬ Press the recording start/stop button again to pause recording. Record motion pictures to a disc or an SD card. ≥ Use an SD card that can be used for motion picture recording.
VQT1J42ENG.book 54 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording ≥ Discs or SD cards with more than the maximum scenes or dates cannot be used with this unit. ≥ Sound is recorded from the internal microphones on the top of this unit. Take care not to cover the microphone with your hand. ≥ Each time the unit is put into recording pause, the counter display will be reset to “0h00m00s”. ≥ When recording motion pictures, do not remove the battery or disconnect the AC adaptor.
VQT1J42ENG.book 55 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording PRE-REC function This prevents you missing a shot. VIDEO This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed so you can capture moments you would otherwise have missed. ¬ When the mode dial is set to and an SD card is inserted in this unit. 1 Open the LCD monitor or extend the viewfinder. ≥ PRE-REC is canceled in the following cases. jIf you operate the mode dial.
VQT1J42ENG.book 56 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Recording modes and recordable time available for the motion picture ＨＤ ＲＡＭ ＨＤ ＨＤ -ＲＷ -Ｒ ＨＤ VIDEO -Ｒ ＤＬ ＲＡＭ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ -Ｒ -Ｒ ＤＬ Switch the picture quality of the motion pictures to be recorded. ¬ Rotate the mode dial to select or . Press the MENU button, then select [VIDEO] (HD mode) or [BASIC] (STD mode) # [REC MODE] # desired item and press the cursor button.
VQT1J42ENG.book 57 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording ª Approximate recordable time for an SD card made by Panasonic SD card memory HG HN HE 256 MB 2 min 3 min 5 min 512 MB 5 min 7 min 10 min 1 GB 10 min 15 min 22 min 2 GB 20 min 30 min 45 min 4 GB 40 min 1h 1 h 30 min 8 GB 1 h 20 min 2h 3h HG (1920k1080): Motion pictures can be recorded with the highest picture quality. HN (1440k1080): Motion pictures can be recorded with normal picture quality.
VQT1J42ENG.book 58 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Recording still pictures (JPEG images) on an SD card Focus indication: PHOTO Record the still picture on an SD card. ≥ This number of recording pixels for still pictures is compatible with the 16:9 aspect ratio of a wide-screen TV. They are recorded at [1920k1080]. ≥ Still pictures cannot be recorded in STD mode. 1 Rotate the mode dial to select or .
VQT1J42ENG.book 59 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording ≥ The sound cannot be recorded. ≥ If the write protection switch on the SD card is set to LOCK, it cannot be used for recording. ≥ The PHOTO SHOT button on the remote control cannot be pressed halfway. ≥ If the [PICT.QUALITY] is set to [ ], mosaic-pattern noise may appear on a playback image depending on the picture content. ≥ While this unit accesses the SD card ( is displayed/the access lamp is lit), do not perform the following operations.
VQT1J42ENG.book 60 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording About simultaneous recording (recording still pictures while recording motion pictures) You can record still pictures on an SD card even while recording motion pictures on SD card and/ or disc. While recording motion pictures, press the PHOTO SHOT button fully (press to the bottom) to take the picture. Number of pixels and picture quality for still picture recording PHOTO Picture quality Selecting the picture quality.
VQT1J42ENG.book 61 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Recording functions Approximate Number of Recordable Pictures on an SD Card Zoom in/out function ª Picture quality and number of recordable pictures Picture size ＨＤ ＲＡＭ 2.1Ｍ (1920k1080) ＨＤ -ＲＷ ＲＡＭ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ VIDEO PHOTO -Ｒ -Ｒ ＤＬ The maximum optical zoom ratio is 10k.
VQT1J42ENG.book 62 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording ≥ When the zoom magnification is 1k, this unit can focus on a subject approx. 4 cm (1.6z) away from the lens. (Macro function) ≥ The zoom speed varies depending on the range over which the zoom lever is moved. (The zoom speed does not vary when operating with the remote control.) ≥ If the zoom lever is pushed to the end, you can zoom from 1k up to 10k in as fast as approx. 2.3 seconds.
VQT1J42ENG.book 63 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Recording Yourself ＨＤ ＲＡＭ ＨＤ -ＲＷ ＲＡＭ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ Intelligent contrast control VIDEO PHOTO -Ｒ -Ｒ ＤＬ This is for recording both bright and dark parts clearly at the same time. ＨＤ ＲＡＭ ＨＤ ＨＤ -ＲＷ -Ｒ ＨＤ -Ｒ ＤＬ VIDEO PHOTO You can record yourself while viewing the LCD monitor. You can record persons in front of the unit while showing them the image.
VQT1J42ENG.book 64 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording 4 Press the recording start/stop Fade in/fade out function ＨＤ ＨＤ -ＲＷ ＲＡＭ ＲＡＭ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ -Ｒ button. (Fade out) VIDEO -Ｒ ＤＬ Fade in: The image and audio gradually appear. Fade out: The image and audio gradually disappear. ¬ Rotate the mode dial to select . or 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration. The image/audio gradually disappears.
VQT1J42ENG.book 65 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording MagicPix function This allows recording in dark locations. ＨＤ ＲＡＭ ＨＤ ＨＤ -ＲＷ ＲＡＭ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ VIDEO PHOTO -Ｒ -Ｒ ＤＬ This function allows you to record color images in very low light situations. (Minimum required illumination: approx. 1 lx) Attach this unit to a tripod, and you can record images free from vibration. ≥ Recorded scene is seen as if frames were missed. ¬ Rotate the mode dial to select .
VQT1J42ENG.book 66 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording ≥ If you record a person in the distance, the face may not be recorded clearly. In this case, cancel soft skin mode or zoom in on the face (close-up) to record. (STD mode) Move the cursor button up to select [ ]. Backlight compensation function This is for preventing a backlit subject from being darkened.
VQT1J42ENG.book 67 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Ø10: Ø2: Starts recording after 10 seconds Starts recording after 2 seconds Built-in flash 3 Press the PHOTO SHOT button. A still picture is recorded after the [Ø10] or [Ø2] display and the recording lamp flashes for the time which has been set. ≥ After recording, the self-timer is canceled. ≥ If you press the PHOTO SHOT button halfway and then fully in auto focus mode, the subject is focused when the button is pressed halfway.
VQT1J42ENG.book 68 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording When the flash is not used Set the flash to [FLASH OFF]. ≥ Do not block the flash with your hand or by other means. ≥ The unit automatically determines if the flash is necessary even when it has been set to [FLASH OFF] by detecting the ambient brightness. (If it determines that the flash is necessary, the [ ] indication lights up in red when the PHOTO SHOT button is pressed halfway.) ≥ If the [ß] indication etc.
VQT1J42ENG.book 69 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Tele macro function Image stabilizer function This is for close-ups bringing only what you want to record into focus. This is for reducing image shakes during recording. ＨＤ ＲＡＭ ＨＤ ＨＤ -ＲＷ ＲＡＭ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ VIDEO PHOTO -Ｒ -Ｒ ＤＬ ＨＤ ＲＡＭ ＨＤ -ＲＷ ＲＡＭ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ VIDEO PHOTO -Ｒ -Ｒ ＤＬ By focusing only on the subject and blurring the background, the image can be impressive.
VQT1J42ENG.book 70 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording STD mode Guide line function This is for viewing the slope and the balance of the image while recording or playing back. ＨＤ ＨＤ -ＲＷ ＲＡＭ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ VIDEO PHOTO -Ｒ -Ｒ ＤＬ ¬ Rotate the mode dial to select . Press the MENU button, then select [BASIC] > [GUIDE LINES] # [ON] and press the cursor button.
VQT1J42ENG.book 71 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Wind noise reduction function Microphone level This is for reducing the wind noise coming into the microphone when recording. This is for adjusting the microphone input level. ＨＤ ＨＤ ＨＤ ＲＡＭ ＲＡＭ -ＲＷ ＨＤ -Ｒ ＲＡＭ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ -Ｒ VIDEO -Ｒ ＤＬ ¬ Rotate the mode dial to select . or Press the MENU button, then select [VIDEO] (HD mode) or [ADVANCED] (STD mode) # [WIND CUT] # [ON] and press the cursor button.
VQT1J42ENG.book 72 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording ≥ A gain value for each of the 2 built-in microphones is displayed. (The input level of the microphones cannot be set individually.) 3 Press the cursor button to set and then press the MENU button to finish the setting. Zebra display Displays portions of the image that may be overexposed.
VQT1J42ENG.book 73 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Color bar Auto slow shutter mode This is for displaying a color bar to check the color tone. ＨＤ ＲＡＭ ＨＤ -ＲＷ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ VIDEO ＨＤ ＲＡＭ PHOTO This unit displays a 7 color bar which is useful for adjusting the picture quality of the TV or the external monitor. ¬ Rotate the mode dial to select . or Press the MENU button, then select [ADVANCED] # [COLOR BAR] # [ON] and press the cursor button.
VQT1J42ENG.book 74 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording Manual recording functions Scene mode This is for recording in various situations. ＨＤ ＲＡＭ ＨＤ -ＲＷ ＲＡＭ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ VIDEO PHOTO -Ｒ -Ｒ ＤＬ When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ¬ Rotate the mode dial to select . or 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL.
VQT1J42ENG.book 75 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording To restore to the automatic adjustment Manual focus adjustment ＨＤ ＲＡＭ ＨＤ -ＲＷ ＲＡＭ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ VIDEO PHOTO -Ｒ -Ｒ ＤＬ If auto focusing is difficult due to the conditions, then use manual focus. ¬ Rotate the mode dial to select . 1 or Press the AUTO/MANUAL/FOCUS switch down again to the FOCUS position. ≥ You can also restore the auto focusing by setting the AUTO/MANUAL/FOCUS switch to AUTO.
VQT1J42ENG.book 76 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording White balance This is for recording in natural colors. ＨＤ ＲＡＭ ＨＤ ＨＤ -ＲＷ ＲＡＭ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ VIDEO PHOTO -Ｒ -Ｒ ＤＬ The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ¬ Rotate the mode dial to select .
VQT1J42ENG.book 77 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Recording ª White balance sensor Manual shutter speed/aperture adjustment ＨＤ ＲＡＭ ＨＤ -ＲＷ ＲＡＭ The white balance sensor A detects the type of light source during recording. Do not cover the white balance sensor during recording, or it may not function properly. ª Black balance adjustment This is one of the 3CCD system functions that automatically adjusts the black when the white balance is set in the manual adjustment mode.
VQT1J42ENG.book 78 ページ ２００７年７月２０日 金曜日 Recording ≥ The shutter speed closer to 1/8000 is faster. ≥ (HD mode) If [AUTO SLOW SHTR] is set to [OFF], then the shutter speed will be set between 1/60 and 1/8000. B Iris/Gain value: CLOSE # (F16 to F2.0) # OPEN # (0dB to 18dB) ≥ Value closer to [CLOSE] darken the image. ≥ Value closer to [18dB] brighten the image. ≥ When the iris value is adjusted to brighter than [OPEN], it changes to the gain value.
VQT1J42ENG.book 79 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Playback Playback Playback of motion pictures ＨＤ ＨＤ ＲＡＭ ＲＡＭ -ＲＷ ＨＤ ＨＤ -Ｒ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ -Ｒ VIDEO -Ｒ ＤＬ Play back the motion pictures recorded on the disc or SD card. ¬ HD mode 1 Rotate the mode dial to select The selected scene will be encircled by a yellow frame.
VQT1J42ENG.book 80 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Playback 2 Select the scene to be played ª Repeat playback Playback of the first scene starts after playback of the last scene finishes. back. Press the MENU button, then select [PLAY SETUP] # [REPEAT PLAY] # [ON] and press the cursor button. MENU The [ ] indication appears on the thumbnail and full screen views. ≥ The following scenes can be played back repeatedly.
VQT1J42ENG.book 81 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Playback ≥ Sound will be heard only during normal playback. ≥ If pause play is continued for 5 minutes, the screen returns to the thumbnails. ≥ When the amount of time recorded on the scene is too short, playback may not be possible. ≥ Scenes which cannot be displayed as thumbnails (the thumbnails are displayed as [ ]) cannot be played back. (HD mode) An error message appears and the screen shows the thumbnails.
VQT1J42ENG.book 82 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Playback Slow-motion playback 1 Move the cursor button up during playback to pause the playback. 2 Move and hold the cursor button right. (Slow-motion pictures will be played back in reverse when you move and hold the cursor button left.) Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Move the cursor button up during playback to pause the playback. 2 Move the cursor button right.
VQT1J42ENG.book 83 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Playback To adjust the speaker volume during playback Adjust the speaker volume during playback. Move the volume lever to change the volume level. To return to playing back all the scenes Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [VIEW ALL] and press the cursor button. ≥ When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession. ([ ] is displayed.
VQT1J42ENG.book 84 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Playback Still picture playback (JPEG images) on an SD card PHOTO 1 Rotate the mode dial to select right and then pressing the center of the cursor button. ≥ The file number display switches to the page number when the still picture playback tab or [ ]/[ ] is selected. 4 Press the cursor button. . OFF STD HD The lens cover closes. 2 Press the cursor button up and then right to select the [ ] tab.
VQT1J42ENG.book 85 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Playback ≥ It takes time to display the file, depends on the number of pixels of the file. ≥ Files which cannot be displayed as thumbnails (the thumbnails are displayed as [ ]) cannot be played back. ≥ If you attempt to play back a file which is a different format or a damaged file, an error message appears and the screen shows the thumbnails.
VQT1J42ENG.book 86 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Editing Editing Deleting multiple scenes from the thumbnail display Editing scenes HD mode ¬ Rotate the mode dial to select and then select the [ ] or [ ] tab. Deleting scenes This is for deleting scenes. STD mode ＨＤ ＲＡＭ ＨＤ -ＲＷ ＨＤ -Ｒ ＨＤ VIDEO -Ｒ ＤＬ ＲＡＭ -ＲＷ （ＶＲ） ¬ Rotate the mode dial to select . 1 Press the button while the thumbnail view screen is displayed. The deleted scenes cannot be restored.
VQT1J42ENG.book 87 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Editing The selected scene is encircled by a red frame. ≥ When the cursor button is pressed again, the scene will be unselected. ≥ Up to 99 scenes (HD mode)/8 scenes (STD mode) can be selected in succession. 4 (Only when [SELECT] is selected in step 2) Press the Dividing a scene to delete This is for dividing a scene into two to delete an unnecessary portion. ＨＤ ＲＡＭ ＨＤ -ＲＷ ＨＤ -Ｒ ＨＤ VIDEO -Ｒ ＤＬ button.
VQT1J42ENG.book 88 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Editing ≥ Using slow-motion playback or frame-by-frame playback makes it easy to search for the point where you want to divide the scene. (l 82) 4 When the confirmation message appears, select [YES], then press the cursor button. 5 Delete the unnecessary scenes. ≥ Refer to P86 for deleting scenes. To continue dividing other scenes Protecting scenes This is for preventing scenes from being deleted by mistake.
VQT1J42ENG.book 89 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Editing Copying from an SD card to a disc VIDEO You can easily copy motion pictures recorded on an SD card with this unit to a disc. ≥ Compatible discs are DVD-RAM, DVD-RW, DVD-R and DVD-R DL. Copying all the scenes at one time ¬ Connect the AC adaptor to this unit, then insert a DVD-RAM or a DVD-RW formatted on this unit (l 93) or a new disc.
VQT1J42ENG.book 90 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Editing 4 When the confirmation message appears, select [YES], then press the cursor button. To complete copying Press the MENU button. ≥ Do not turn off the power on this unit while copying. ≥ You can copy all the scenes at one time when [COPY ALL] is selected in step 1. ≥ We recommend preparing a spare disc before copying. ≥ The order in which the scenes were copied cannot be changed. ≥ Data that has been recorded on another device cannot be copied.
VQT1J42ENG.book 91 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Editing 2 Move the cursor button up or down to select [ALL SCENES] or [SELECT] and press the cursor button. ≥ Do not open the card slot cover while deleting. The deletion will stop. ≥ In case of [ALL SCENES], the deletion may take time if there are many files on the SD card. ≥ Do not turn off this unit while deleting. ≥ When you delete files, use a battery with sufficient battery power or use the AC adaptor.
VQT1J42ENG.book 92 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Editing ≥ You can also select multiple files in succession. DPOF setting This is for writing the printing data on an SD card. To complete the settings Press the MENU button. To cancel all DPOF settings PHOTO You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card.
VQT1J42ENG.book 93 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Disc and card management ≥ When formatting is complete, press the MENU button to exit the message screen. Disc and card management Formatting Formatting discs This is for initializing discs. ＨＤ ＲＡＭ ＨＤ -ＲＷ ＲＡＭ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Store important data on a computer, etc. HD mode ¬ Rotate the mode dial to select or and then select the [ ] tab.
VQT1J42ENG.book 94 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Disc and card management Finalizing a disc Formatting SD cards This is for initializing SD cards. Finalizing a disc VIDEO PHOTO Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer, etc. ¬ Rotate the mode dial to select . or 1 Press the MENU button, then select [SETUP] # [FORMAT CARD] # [YES] and press the cursor button.
VQT1J42ENG.book 95 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Disc and card management 2 Press the MENU button, then To allow the disc to be played back on other DVD players etc. (STD mode) select [DISC SETUP] # [FINALIZE] # [YES] and press the cursor button. DVD-RAM: MENU ≥ It is not necessary to finalize DVD-RAM. DVD-RW (VR format): ≥ DVD-RW (VR format) after finalization can be recorded and edited in the same way as DVD-RW (VR format) before finalization.
VQT1J42ENG.book 96 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Disc and card management Un-finalizing a DVD-RW Creating a top menu This is for un-finalizing a DVD-RW so that it can be used for recording. A top menu is displayed when a DVD-RAM is played back on other devices that support AVCHD. ＨＤ -ＲＷ -ＲＷ （Ｖ） ＨＤ ＲＡＭ HD mode ¬ Rotate the mode dial to select and then select the [ ] tab. ¬ Rotate the mode dial to select and then select the [ ] tab. STD mode 1 Connect this unit to the AC adaptor.
VQT1J42ENG.book 97 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Disc and card management Protecting a disc ＨＤ ＲＡＭ ＨＤ -ＲＷ This is for protecting discs (write protection) when they are being ejected from this unit to prevent them from being formatted if they are inserted in other devices. Discs protected using this unit cannot be edited or used to record on other devices, but they can be used in the same way as unprotected discs with this unit.
VQT1J42ENG.book 98 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Disc and card management ¬ Rotate the mode dial to select or and then select the [ ] tab. Press the MENU button, then select [DISC SETUP] or [SETUP] # [AUTO PROTECT] # [ON] and press the cursor button. MENU Disc protection setting ＲＡＭ -ＲＷ （ＶＲ） This is for preventing recorded contents from being deleted or edited by mistake. Further recording and editing is not possible on protected discs until the protection is released.
VQT1J42ENG.book 99 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Disc and card management Displaying disc information ＨＤ ＲＡＭ ＲＡＭ ＨＤ ＨＤ -ＲＷ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ ＨＤ -Ｒ -Ｒ ＤＬ -Ｒ -Ｒ ＤＬ Information such as the type of recorded disc, the number of recorded scenes, the remaining space, whether or not the disc is finalized etc. is displayed. HD mode ¬ Rotate the mode dial to select and then select the [ ] tab. STD mode ¬ Rotate the mode dial to select .
VQT1J42ENG.book 100 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products ≥ Do not use any other AV cables except the supplied one. ≥ Do not use any other component cables except the supplied one. ≥ Use the AC adaptor to free you from worrying about the battery running down. With other products Watching Video/Pictures on your TV ª To display the on-screen information on the TV Playback on TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen.
VQT1J42ENG.book 101 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products 1 Connecting with a HDMI cable (optional) ＨＤ ＨＤ ＲＡＭ -ＲＷ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ VIDEO PHOTO What is HDMI? HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal.
VQT1J42ENG.book 102 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products ª About the settings when connecting with HDMI When this unit is connected to another device with a HDMI cable, the output setting on this unit can be changed. HDMI output resolution You can switch the method to output the images. Press the MENU button, then select [SETUP] > [HDMI RESOLUTION] desired item and press the cursor button. [AUTO]: The output resolution is automatically set based on the information from the connected TV.
VQT1J42ENG.book 103 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products Playback using EZ Sync™ (HDAVI Control™) ＨＤ ＨＤ ＲＡＭ -ＲＷ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ VIDEO PHOTO If you connect this unit to a Panasonic TV compatible with EZ Sync™ (HDAVI Control™) with a HDMI cable, the following linked operations become possible. ≥ You can use the remote control for the TV to control playback on this unit. ≥ If you use the remote control for the TV to turn off the power, the power on this unit also turns off.
VQT1J42ENG.book 104 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products 5 Operate with the remote control for the TV. 1) 2) A DISPLAY ON/OFF B C D 1) Press the button up, down, left or right to select a scene or file to be played back, and then press the button in the center to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
VQT1J42ENG.book 105 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products 2 Connecting with the component cable (supplied) and the AV cable (supplied) ＨＤ ＲＡＭ ＨＤ -ＲＷ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ VIDEO PHOTO ≥ Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit to a TV with the component cable (supplied) and the AV cable (supplied). A Component cable (supplied) B AV cable (supplied) ≥ Connect to terminals of the same color.
VQT1J42ENG.book 106 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products ª If the image or audio from this unit does not appear on the TV ≥ Check the connections. ≥ Check that the plugs are inserted as far as they go. ≥ Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.) ≥ If the images are not displayed correctly on a wide-screen TV, adjust the setting in screen mode on the TV.
VQT1J42ENG.book 107 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products ª To watch images with a 16:9 aspect ratio on a regular TV (4:3) When playing back motion pictures or still pictures recorded on this unit with a 16:9 aspect ratio on a TV with a 4:3 aspect ratio, the images on the screen may be squeezed horizontally. In this case, change the menu setting to play back the pictures in the original aspect ratio. (Depending on the TV setting, the pictures may not be displayed correctly.
VQT1J42ENG.book 108 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products With Blu-ray Disc Player, DVD recorder, DVD player, computer etc. Do not insert DVD-RW, DVD-R or DVD-R DL discs that have not been finalized into a Blu-ray Disc Player, DVD recorder, DVD player, computer etc. Doing so could result in an unusable disc.
VQT1J42ENG.book 109 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products With a DVD recorder or video device Dubbing images onto other video device ＨＤ ＲＡＭ ＨＤ -ＲＷ ＲＡＭ ＨＤ -Ｒ ＨＤ -Ｒ ＤＬ （Ｖ） -ＲＷ （ＶＲ） -ＲＷ 5 Then start recording on the connected device. ≥ See the operating instructions of the video device for details. To stop dubbing 1) Stop recording on the connected device. 2) Then stop playback on this unit. VIDEO PHOTO -Ｒ -Ｒ ＤＬ ≥ Images are dubbed in standard picture quality.
VQT1J42ENG.book 110 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products reconnect the USB cable or check the printer, SD card and settings on this unit. With a printer (PictBridge) PHOTO To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) PictBridge is an industry standard from the Camera & Imaging Products Association (CIPA) for direct printing.
VQT1J42ENG.book 111 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With other products 7 Select the paper size setting on [PAPER SIZE]. [STANDARD]: Size specific to the printer [4t5 INCH]: L size [5t7 INCH]: 2L size [4t6 INCH]: Postcard size [A4]: A4 size ≥ You cannot set paper sizes not supported on the printer. 8 Select the layout setting on [PAGE LAYOUT]. selected, all the settings are kept and the screen returns to step 4. ≥ Avoid the following operations during printing. These operations disable proper printing.
VQT1J42ENG.book 112 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer With a computer Before using with a computer What you can do with a computer Data type Available functions Software used Copying data to a computer Writing data to media* Copying data between media* Motion picture Playing back on a computer HD Writer 2.
VQT1J42ENG.book 113 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer Contents on provided CD-ROM The following software applications are contained on the provided CD-ROM. ª HD Writer 2.0E for SX/SD You can acquire data of motion pictures and still pictures to the hard disk of the computer, easily edit (split, merge, delete) the motion pictures, then write the data to an SD card or disc. ≥ You cannot copy, play back, or create a DVD-Video from the data recorded in STD mode.
VQT1J42ENG.book 114 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
VQT1J42ENG.book 115 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer Operating environment ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible DVD writer drive and media are necessary for writing to a DVD.) ≥ When 2 or more USB devices are connected to a computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed. ≥ Use the supplied USB cable when connecting to the computer.
VQT1J42ENG.book 116 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer Sound DirectSound Support Interface USB port [Hi-Speed USB (USB 2.0)] Other requirements Mouse or equivalent pointing device ≥ Supplied CD-ROM is available for Windows only. ≥ Operation is not guaranteed on computers that are not PC/AT compatible. ≥ Input is not supported in languages other than English, French and Spanish. ≥ Operation cannot be guaranteed on all DVD drives.
VQT1J42ENG.book 117 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer Installation When installing the software, log on to your computer as the Administrator (or with a user name with equivalent authorization) or with the user name for a standard user account. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all the applications that are running. ≥ Do not perform any other operations on your computer while the software is being installed.
VQT1J42ENG.book 118 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer 7 Click [Finish]. Uninstalling software application Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) The computer must be rebooted for the application to work. [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program].
VQT1J42ENG.book 119 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer Connection and recognition Camera–Computer connection After the software applications are installed, this unit must be connected to the computer and be correctly recognized by the computer. ≥ Connect after installing the software applications. ≥ Remove the supplied CD-ROM if it is inserted in the computer. (If the [Setup Menu] screen is displayed, wait until it finishes and then remove the CD-ROM.
VQT1J42ENG.book 120 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer About the computer display When the unit is connected to a computer, it is recognized as an external drive. ª SD card drive display ≥ [Removable Disk] is displayed in [My Computer (Computer)]. ª Disk drive display [Optical Disk Drive] is displayed in [My Computer (Computer)], but it cannot be opened on computers that do not support the UDF 2.5.
VQT1J42ENG.book 121 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer Example folder structure of a DVD-RW (Video format) or DVD-R: DVD_CAMERA* VIDEO_TS ≥ DVD-Video format motion pictures are stored in the [VIDEO_TS] folder. * Depending on the maker of the disc and the device used to format it, the name displayed will differ. We recommend using HD Writer 2.0E for SX/ SD to copy or write back motion picture data recorded in HD mode on a disc, an SD card or SD media storage.
VQT1J42ENG.book 122 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer Verifying the unit is correctly recognized by the computer Connect the unit to the computer with a USB cable, select [PC CONNECT (DISC)] or [PC CONNECT (CARD)] on the USB function selection screen and then follow the steps below. ≥ With some computers including those made by NEC, the Device Manager may not be displayed if a mode that places restrictions on the functions has been established.
VQT1J42ENG.book 123 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer Using HD Writer 2.0E for SX/ SD ≥ When using HD Writer 2.0E for SX/SD on Windows XP/2000, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer 2.
VQT1J42ENG.book 124 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer ≥ After copying is complete, a message appears. If [Yes] is clicked, all the motion pictures and still pictures on the SD card will be deleted. ≥ If you switch from an SD card to a disc or a disc to an SD card, first disconnect and then reconnect the USB cable, click the [Refresh] button and then select [PC CONNECT (DISC)] or [PC CONNECT (CARD)] again.
VQT1J42ENG.book 125 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer ≥ The scenes from the selected one to the last one are played back on the full screen. ≥ Right click on the screen and then select [Stop] to stop playback. 4 Click the [Output the file] button. ª Converting data that was copied to the hard disk of the computer to MPEG2 format ≥ Format the disc on this unit or with [Format disc] in HD Writer 2.0E for SX/SD.
VQT1J42ENG.book 126 ページ ２００７年７月２０日 With a computer 3 Insert the disc in a drive for writing, click and then select the save destination. 4 Click and then select [DVD-Video (High quality)] or [DVD-Video (Standard quality)]. 5 Click the [Start Copy] button. ≥ A confirmation message appears. Click [OK] and creating the DVD-video starts. ≥ It takes time to convert to MPEG2 format. ≥ The disc created is a DVD-Video so it cannot be used with HD Writer 2.0E for SX/SD.
VQT1J42ENG.book 127 ページ ２００７年７月２０日 金曜日 午前１０時３６分 With a computer If using a Macintosh ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers cannot be used. ≥ Apple, Mac OS is either registered trademarks or trademarks of Apple Inc. in the United States and/or other countries. ≥ PowerPC is a trademark of International Business Machines Corporation.
VQT1J42ENG.book 128 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Others Menus and Indications Menu list HD mode recording menus / ª [BASIC] [SCENE MODE] (l 74) [D.ZOOM] (l 62) [O.I.S.] (l 69) [GUIDE LINES] (l 70) [CLOCK SET] (l 48) ª [VIDEO] [REC MODE] (l 56) [FADE COLOR] (l 64) [WIND CUT] (l 71) [ZOOM MIC] (l 62) [MIC LEVEL] (l 71) [H.SHOE MIC] (l 131) [AGS] (l 52) ª [PICTURE] [PICT.
VQT1J42ENG.book 129 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others STD mode recording menus HD mode playback menus ( motion picture playback) ª [BASIC] ª [PLAY SETUP] [SCENE MODE] (l 74) [GUIDE LINES] (l 70) [REC MODE] (l 56) [CLOCK SET] (l 48) [PLAY MODE] (l 83) [REPEAT PLAY] (l 80) [RESUME PLAY] (l 83) [SCENE PROTECT] (l 88) [GUIDE LINES] (l 70) ª [ADVANCED] [D.ZOOM] (l 62) [O.I.S.] (l 69) [FADE COLOR] (l 64) [REC LAMP] (l 131) [WIND CUT] (l 71) [ZOOM MIC] (l 62) [H.
VQT1J42ENG.
VQT1J42ENG.book 131 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others STD mode playback menus ( motion picture playback) Menus related to [VIDEO] and [ADVANCED] ª [H.SHOE MIC] ª [PLAY SETUP] ≥ [NORMAL] ≥ [LOWCUT] Set to [LOWCUT] and this reduces low sound noise and wind noise hitting the stereo zoom microphone (VW-VMH3; optional) mounted on the smart accessory shoe.
VQT1J42ENG.book 132 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others ≥ In the following cases, the unit may not turn off even when you set this to [5 MINUTES]. jWhen using the AC adaptor jWhen connecting the unit to a computer or printer via the USB cable jWhen PRE-REC is used Indications ª Recording indications Motion picture recording ª [BEEP SOUND] ≥ [OFF] ≥ [ON] This allows operations such as starting and ending recording to be signaled by a beep.
VQT1J42ENG.book 133 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others / Soft skin mode ß/ßA/ Flash Tele macro ßi/ßj Flash level Fade (White), Fade (Black) / Focus indication Zoom microphone Wind noise reduction Ø10/Ø2 Self-Timer recording External microphone supporting the smart accessory shoe LOWCUT Red eye reduction ± (White) ¥ (Green) MagicPix function MEGA MEGA OIS 2.
VQT1J42ENG.book 134 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others ª Playback indications 1 Motion picture playback Contents that have been protected. 2.1Ｍ Still picture playback DPOF already set (to more than 1) Number of recording pixels for still pictures 1920k1080 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
VQT1J42ENG.book 135 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Messages CANNOT RECORD. Data writing to the disc or SD card has failed. NO DATA. There are no images recorded on the disc or SD card. If this message appears although data is recorded on the SD card, the condition of the card is probably not stable. Turn off the power and then turn it on again. CANNOT BE USED DUE TO INCOMPATIBLE DATA. CANNOT RECORD -INCOMPATIBLE CONTROL DATA. The recording format is different so it cannot be used.
VQT1J42ENG.book 136 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others CANNOT READ DISC. PLEASE CHECK CONDITION OF DISC. There are scratches or dirt on the recording/playback side of the disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 30) If the disc is scratched, insert a new one. CHECK CARD. This card is not compatible or it cannot be recognized by the unit. THIS CARD CANNOT RECORD IN VIDEO MODE. An 8 MB or 16 MB SD card on which motion pictures cannot be recorded is inserted. CARD LOCKED.
VQT1J42ENG.book 137 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others CANNOT SET. The [GUIDE LINES], [ZEBRA], [MF ASSIST], [MIC LEVEL] and [RED EYE] menu settings cannot be set when the color bar is set. DISCONNECT USB CABLE. The unit cannot correctly establish the connection to the computer or printer. Disconnect and then reconnect the USB cable. (HD mode) DISCONNECT USB CABLE. (STD mode) CANNOT OPERATE WHILE CONNECTED TO COMPUTER.
VQT1J42ENG.book 138 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
VQT1J42ENG.book 139 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Frequently asked questions What kind of discs can be used? DVD-RAM, DVD-RW, DVD-R and DVD-R DL can be used if they are 8 cm (3q) bare discs. (l 24) Can discs with a cartridge be used? They can be used if the cartridge is removed. Can double sided discs be used? They can be used. However you cannot record or play continuously from one side of the disc to the other. You will need to eject the disc and turn it over.
VQT1J42ENG.book 140 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Troubleshooting ª Unit operations Problem Check points This unit cannot be turned on. ≥ Is the battery fully charged? # Charge the battery using the AC adaptor. (l 31) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Make sure the LCD monitor is opened or the viewfinder extended. This unit is turned off automatically.
VQT1J42ENG.book 141 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Problem This unit cannot be operated though it is turned on. This unit does not operate normally. Check points ≥ The unit cannot be operated unless you open the LCD monitor or extend the viewfinder. ≥ Press the RESET button. (l 145) If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again.
VQT1J42ENG.book 142 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Problem Check points The disc cannot be read. ≥ Are there fingerprints or dirt on the surface of the disc? # If there are fingerprints or dirt on the disc, wipe them off. (l 30) Recording does not start although power is supplied to this unit and the disc or SD card is correctly inserted. ≥ (HD mode) Has the DVD-RW, DVD-R or DVD-R DL been finalized? # After finalizing, the discs become play-only and cannot record.
VQT1J42ENG.book 143 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Problem Check points Recorded still pictures are not clear. ≥ Are you trying to record small or finely detailed objects with [PICT.QUALITY] set at [ ]? # If you try to record small or finely detailed objects with [PICT.QUALITY] set at [ ], the images may break up into a mosaic-like pattern. Record with [PICT.QUALITY] set at [ ] instead. (l 60) Sound is not played back from the built-in speaker of this unit.
VQT1J42ENG.book 144 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Problem Even if a disc or an SD card is formatted, it cannot be used. Check points ≥ Either this unit or the disc or SD card may be damaged. Please consult a dealer. Use an SD card from 8 MB to 8 GB with this unit. If the SD card is inserted in this unit, it is not recognized. ≥ Is the SD card formatted on a computer inserted? # Use this unit to format SD cards.
VQT1J42ENG.book 145 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Problem Check points ≥ Is the disc scratched or dirty? # After using the following method to restart the unit, eject the disc and clean it. (l 30) If there are scratches on the disc, use a new disc. ≥ The unit has automatically detected an error. Press the RESET button with the projecting part of the grip belt A. This will restart the unit. “PUSH THE RESET SWITCH.” or “CHECK THE DISC AFTER PUSHING THE RESET SWITCH TO REPAIR THE DISC.
VQT1J42ENG.book 146 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others ª With a computer Problem Check points Even if connected by the USB cable, this unit is not recognized by the computer. ≥ Is the AC adaptor connected? # Use the AC adaptor when connecting this unit and a computer. ≥ Select another USB terminal on the computer. ≥ Check the operating environment. (l 115) ≥ Turn the power to the unit off and then back on again and reconnect the USB cable.
VQT1J42ENG.book 147 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. * Just how smoothly the scenes will be played back continuously depends on the playback unit.
VQT1J42ENG.book 148 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others ª When PRE-REC was used for recording 1 Normal recording 2 PRE-REC recording A The picture momentarily stops at the end of the last scene that was recorded normally before PRE-REC recording. ª When the recording mode was changed from HN/HE to HG or from HG to HN/HE A The picture momentarily stops where the scenes switch between HN/HE and HG modes. B Playback is smooth if the same mode is used or the mode is switched between HN and HE.
VQT1J42ENG.book 149 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others e.g. 2: When recording again after having deleted the last scene. 1 2 A B Scene to be deleted A new scene is recorded here. The image will be still for several seconds wherever a scene was deleted. The images of consecutive scenes where they are no deletions are played back smoothly one after another. ª When editing scenes on a computer using a program such as HD Writer 2.0E for SX/SD e.g. 1: When scenes were selected using HD Writer 2.
VQT1J42ENG.book 150 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others e.g. 2: When deleting scenes was initiated by HD Writer 2.0E for SX/SD When a scene is deleted, the images may be still for several seconds where that scene was deleted. e.g. 3: When merging scenes was initiated by HD Writer 2.0E for SX/SD Wherever scenes are merged, the images may be still for several seconds where the original scenes were split.
VQT1J42ENG.book 151 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Cautions for use About this unit ≥ The unit, disc and SD card become warm after long operation, but this is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
VQT1J42ENG.book 152 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others ≥ In certain situations, continuous use could cause the unit to overheat and cause a malfunction. Such use is strongly discouraged. When you are not going to use the unit for an extended time. ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. About the battery The battery used in this unit is a rechargeable lithium-ion battery.
VQT1J42ENG.
VQT1J42ENG.book 154 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥ When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
VQT1J42ENG.book 155 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Outside of the effective range of automatic white balance adjustment, the image will become reddish or bluish. Even within the effective range of automatic white balance adjustment, the automatic white balance adjustment may not function properly if there is more than one light source. For light outside the functional automatic white balance adjustment range, use the manual white balance adjustment mode.
VQT1J42ENG.book 156 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor)/7.2 V (When using battery) Recording 10.
VQT1J42ENG.book 157 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others USB Card reader/writer function (No copyright protection support) Hi-Speed USB (USB 2.0), USB terminal Type miniB PictBridge-compliant Flash Available range: Approx. 1 m to 2.5 m (3.3 feet to 8.2 feet) Dimensions 83.5 mm (W)k93.5 mm (H)k151.5 mm (D) [3.30z (W)k3.70z (H)k6.00z (D)] (excluding projecting parts) Mass (Weight) Approx. 540 g (1.20 lbs.) (without supplied battery, disc and an SD card) Mass (Weight) in operation Approx.
VQT1J42ENG.book 158 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Audio compression Dolby Digital (Dolby AC3)/2 ch Still pictures Recording media SD Memory Card: 8 MB/16 MB/32 MB/64 MB/128 MB/256 MB/512 MB/1 GB/2 GB (FAT12 and FAT16 format corresponding) SDHC Memory Card: 4 GB, 8 GB (FAT32 format corresponding) Compression JPEG (Design rule for Camera File system, based on Exif 2.
VQT1J42ENG.book 159 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Others Optional accessories Accessory No.
VQT1J42ENG.book 160 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Accessory No.
VQT1J42ENG.book 161 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Accessory Order Form (For USA Customers) Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
VQT1J42ENG.book 162 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Request for Service Notice (USA Only) Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
VQT1J42ENG.book 163 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Limited Warranty (For USA Customers) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. Ave. 65 de Infantería, Km. 9.
VQT1J42ENG.book 164 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Customer Services Directory Service in Canada: As per Sevicenter listed in Canadian warranty information l 165. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.
VQT1J42ENG.book 165 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Warranty (For Canadian Customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
VQT1J42ENG.book 166 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Others Index ∫ A A/V terminal . . . . . . . . . . . . . . . . . .19, 105, 106 AC adaptor . . . . . . . . . . . . . . . . . . . .31, 35, 152 Accessory shoe . . . . . . . . . . . . . . . . . . . . . . .21 Aperture . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Auto focus . . . . . . . . . . . . . . . . . . . . . . . . . .155 Auto Ground-directonal Standby (AGS) . . . . .52 Auto protect . . . . . . . . . . . . . . . . . . . . . . . . . .
VQT1J42ENG.book 167 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others ∫ P Pickup lens . . . . . . . . . . . . . . . . . . . . . . . . . .39 PictBridge . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Picture quality . . . . . . . . . . . . . . . . . . . . . . . .60 Playing back motion pictures by date . . . . . .83 POWER LCD EXTRA . . . . . . . . . . . . . . . . . .50 Power save . . . . . . . . . . . . . . . . . . . . . . . . .131 PRE-REC . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VQT1J42ENG.book 168 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others Others Spanish Quick Use Guide/ Guía española para el uso rápido ª Cómo encender la cámara Mientras pulsa el botón de desbloqueo A, ajuste el disco del modo a , oa . ª Carga de la batería ª Cómo apagar la cámara Ajuste el disco del modo a OFF. 1 Conecte el cable de CA al adaptador de CA y a la toma de CA. 2 Instale la batería en el compartimiento alineando la marca y, luego, conéctela de forma segura.
VQT1J42ENG.book 169 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others ª Insertar/extraer un disco 1 Unir la batería o conectar el ª Grabación de imágenes en movimientos 1 Gire el disco del modo para adaptador de CA. 2 Deslice la palanca DISC EJECT seleccionar . oa una vez y luego suéltela. ST F OF D ACCESS /PC HD DISC EJECT 3 Abra la tapa del compartimiento del disco con la mano e inserte/ extraiga el disco.
VQT1J42ENG.book 170 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others ª Utilice una tarjeta SD para grabar imágenes fijas (Imágenes JPEG) ª Reproducción de imágenes en movimiento 1 Gire el disco del modo para 1 Gire el disco del modo para seleccionar . seleccionar OFF ST D STD OF F . HD HD 2 Pulse el botón PHOTO SHOT hasta la mitad para ajustar el enfoque. (Sólo para enfoque automático) 2 (Sólo modo HD) Pulse el cursor hacia arriba y luego seleccione la ficha [ ] o [ ].
VQT1J42ENG.book 171 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Others ª Reproducción de imágenes fijas (Imágenes JPEG) en una tarjeta SD 1 Gire el disco del modo para seleccionar . OFF STD HD 2 Pulse el cursor hacia arriba y luego hacia la derecha para seleccionar la ficha [ ]. A Ficha de reproducción de imágenes fija 3 Seleccione el archivo que desea reproducir. 4 Pulse el botón cursor. 5 Mueva el botón cursor para obrar.
VQT1J42ENG.book 172 ページ ２００７年７月２０日 金曜日 午前１０時３６分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 P VQT1J42 F0707MK0 ( 3500 A ) C © 2007 Matsushita Electric Industrial Co., Ltd.
