HDCSD9P-VQT1N45_ENG.book 1 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Operating Instructions High Definition Video Camera Model No. HDC-SD9P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.
HDCSD9P-VQT1N45_ENG.book 2 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Things You Should Know Date of Purchase Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your camera. Be sure to retain this manual as your convenient camera information source.
HDCSD9P-VQT1N45_ENG.book 3 ページ ２００７年１２月２６日 水曜日 午後５時５７分 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HDCSD9P-VQT1N45_ENG.book 4 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Batteries 1 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire. 2 Button-type battery (Lithium battery) ≥ Insert with poles aligned.
HDCSD9P-VQT1N45_ENG.book 5 ページ ２００７年１２月２６日 水曜日 午後５時５７分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
HDCSD9P-VQT1N45_ENG.book 6 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
HDCSD9P-VQT1N45_ENG.book 7 ページ ２００７年１２月２６日 IMPORTANT ∫ Carefully observe copyright laws Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights. ∫ Cards that you can use with this unit SD Memory Card and SDHC Memory Card ≥ 4 GB (or more) Memory Cards that do not have the SDHC logo are not based on SD Memory Card Specifications.
HDCSD9P-VQT1N45_ENG.book 8 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Contents Accessories ........................................ 10 Features .............................................. 11 Quick Guide ........................................ 12 Recording Recording (Basic) Preparation Before using [1] Parts identification and handling .................................. 16 Remote control ................................ 19 Setup [1] Power supply ................................. 20 Charging the battery ..........
HDCSD9P-VQT1N45_ENG.book 9 ページ ２００７年１２月２６日 水曜日 Playback With a PC Playback Before using [1] Motion picture playback ............... Playing back motion pictures by date............................................. Intelligent scene selection ............... Repeat playback.............................. Resuming the previous playback..... [2] Still picture playback..................... Playing back still pictures by date.... 64 67 67 68 68 69 71 [1] What you can do with a PC ..........
HDCSD9P-VQT1N45_ENG.book 10 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Accessories Check the accessories before using this unit.
HDCSD9P-VQT1N45_ENG.book 11 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Features ∫ Very clear high definition pictures This unit can record detailed high definition images to an SD card.
HDCSD9P-VQT1N45_ENG.book 12 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Quick Guide ∫ Charging the battery Charging lamp [CHARGE] A Lights up: Charging Goes off: Charging completed 1 2 ≥ Operate the mode switch while at the same time pressing in the lock release button if changing from OFF to another mode. ≥ Status indicator B ≥ To turn off the power, set the mode switch to OFF. ∫ Inserting/removing an SD card Connect the AC cable to the AC adaptor and the AC outlet.
HDCSD9P-VQT1N45_ENG.book 13 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ∫ Help mode ∫ Recording motion pictures The help mode explains the operation icons displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in recording mode. 1) Operate the mode switch to select and open the LCD monitor. 2) Press the recording start/stop button to start recording. ≥ Operate the mode switch to select . 1) Press the cursor button to display the icon. ＨG1920 R1h20m 2) Move the cursor button right to select [ 0h00m00s ].
HDCSD9P-VQT1N45_ENG.book 14 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ∫ Motion picture playback ∫ Still picture playback 1) Operate the mode switch to select . 2) Select [ ] (motion picture playback) A with the cursor button. 1) Operate the mode switch to select . 2) Select [ ] (still picture playback) A with the cursor button. 3) Select the scene to be played back and press the cursor button. 3) Select the still picture to be played back and press the cursor button.
HDCSD9P-VQT1N45_ENG.
HDCSD9P-VQT1N45_ENG.book 16 ページ ２００７年１２月２６日 Before using 1 水曜日 午後５時５７分 Parts identification and handling 345 6 7 8 9 2 10 11 1 13 14 15 19 16 17 18 12 1 LCD monitor open part 2 LCD monitor (l 32) Pull the LCD monitor out in the direction of the arrow with your fingers. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture. 3 ≥ It can open up to 90o.
HDCSD9P-VQT1N45_ENG.book 17 ページ ２００７年１２月２６日 ≥ To adjust manually (l 59) ≥ Playback operations (l 64, 69) 7 Face detection button [ ] (l 46) 8 PRE-REC button [PRE-REC] (l 40) 9 DC input terminal [DC IN 9.
HDCSD9P-VQT1N45_ENG.book 18 ページ ２００７年１２月２６日 26 27 28 水曜日 午後５時５７分 29 30 37 38 31 32 33 34 35 36 26 Mode switch (l 26) 27 Photoshot button [ ] (l 41) 28 Zoom lever [W/T] (In recording mode) (l 44) Volume lever [sVOLr] (In playback mode) (l 65) 29 Speaker 30 Internal microphones (5.
HDCSD9P-VQT1N45_ENG.book 19 ページ ２００７年１２月２６日 Remote control 1 2 PHOTO EXT DISPLAY SHOT 3 DATE/ TIME 1 While pressing the stopper A, pull out the battery holder. 2 Set the buttontype battery with its (i) mark facing upward and then put the battery holder back in place.
HDCSD9P-VQT1N45_ENG.book 20 ページ ２００７年１２月２６日 Setup 1 水曜日 午後５時５７分 Power supply ∫ About batteries that you can use with this unit The Panasonic battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. VW-VBG130/VW-VBG260/VW-VBG6 come with a function to check whether the battery and unit can be safely used together. ≥ To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.
HDCSD9P-VQT1N45_ENG.book 21 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Inserting/removing the battery Open the LCD monitor and install the battery by inserting it in the direction shown in the figure. Removing the battery Be sure to set the mode switch to OFF and check that the status indicator is off before removing the battery. Move the BATTERY lever in the direction indicated by the arrow and remove the battery when unlocked. A Insert the battery until it clicks and locks.
HDCSD9P-VQT1N45_ENG.book 22 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Charging and recording time ≥ Temperature: 25 oC (77 oF)/humidity: 60% ∫ Charging time Battery model number Voltage/capacity Charging time Supplied battery/ VW-VBG130 (optional) 7.2 V/1320 mAh 2 h 35 min VW-VBG260 (optional) 7.2 V/2640 mAh 4 h 40 min VW-VBG6 (optional)* 7.
HDCSD9P-VQT1N45_ENG.book 23 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Connecting to the AC outlet Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Do not use the AC cable from other equipment with this unit. A DC output terminal 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the DC cable to the AC adaptor.
HDCSD9P-VQT1N45_ENG.book 24 ページ ２００７年１２月２６日 Setup 2 水曜日 午後５時５７分 Preparation of SD cards This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. You cannot use SDHC Memory Cards on devices that are only compatible with SD Memory Cards. When using an SDHC Memory Card on another device, confirm that the device supports the SDHC Memory Card.
HDCSD9P-VQT1N45_ENG.book 25 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Inserting/removing an SD card Caution: If the SD card is inserted or removed while the power is on, this unit may malfunction or the data recorded on the SD card may be lost. Card access lamp [ACCESS] ≥ When this unit is processing data, the access lamp A lights up. 1 Set the mode switch to OFF. (l 26) ≥ Check that the status indicator has gone off. 2 Open the SD card cover while sliding the SD CARD OPEN lever B. 3 Insert/remove the SD card.
HDCSD9P-VQT1N45_ENG.book 26 ページ ２００７年１２月２６日 3 Setup 水曜日 午後５時５７分 Selecting a mode (Turning the unit on/off) Operate the mode switch to recording, playback or power OFF. Turn on the power by sliding the mode switch to the lock release button A. or while pressing ≥ Operate the mode switch while at the same time pressing in the lock release button if changing from OFF to another mode. ≥ Status indicator B The status indicator lights and the power turns on.
HDCSD9P-VQT1N45_ENG.book 27 ページ ２００７年１２月２６日 Setup 4 水曜日 午後５時５７分 Using the menu screen Operate the displayed menu screens with the cursor button. 1 Press the MENU button. MENU C Current settings on menus 4 ≥ The menu displayed differs depending on the position of the mode switch. 2 Select the desired setting and press the cursor button to enter the selection. Select the top menu A and move the cursor button right or press the cursor button.
HDCSD9P-VQT1N45_ENG.book 28 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Language selection You can select the language on the screen display and the menu screen. 1 Press the MENU button, then select [LANGUAGE] and press the cursor button. 2 Select [English] and press the cursor button. Menu list Recording mode ∫ [BASIC] [SCENE MODE] (l 59) [D.
HDCSD9P-VQT1N45_ENG.book 29 ページ ２００７年１２月２６日 [BEEP SOUND] This allows operations such as starting and ending recording to be signaled by a beep. 1 Beep When you start recording When you turn on the power When this unit is recognized by the PC or the printer, etc. 2 Beeps When you pause recording When you turn off the power 2 Beeps for 4 times When an error occurs. Check the sentence displayed on the screen.
HDCSD9P-VQT1N45_ENG.book 30 ページ ２００７年１２月２６日 Setup 5 水曜日 午後５時５７分 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 4 below to set the date and time. ¬ Operate the mode switch to select . 1 Select the menu. (l 27) [BASIC] # [CLOCK SET] # [YES] 2 Select the date or time to be set, then set the desired value with the cursor button.
HDCSD9P-VQT1N45_ENG.book 31 ページ ２００７年１２月２６日 水曜日 午後５時５７分 World time setting (Displaying the time of the travel destination) It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. 1 Select the menu. (l 27) [BASIC] # [SET WORLD TIME] # [YES] ≥ If the clock is not set, adjust the clock to the current time. (l 30) ≥ When the [HOME] (your home region) is not set, such as the time for the initial settings, the message appears.
HDCSD9P-VQT1N45_ENG.book 32 ページ ２００７年１２月２６日 Setup 6 水曜日 午後５時５７分 Adjusting LCD monitor ≥ These settings will not affect the images actually recorded.
HDCSD9P-VQT1N45_ENG.
HDCSD9P-VQT1N45_ENG.book 34 ページ ２００７年１２月２６日 Recording (Basic) 1 水曜日 午後５時５７分 Before recording ∫ Basic camera positioning ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. 1 2 3 4 5 Hold the unit with both hands. Put your hand through the grip belt. Do not cover the microphones A.
HDCSD9P-VQT1N45_ENG.book 35 ページ ２００７年１２月２６日 About auto mode Color balance (white balance) and focusing are adjusted automatically. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (The shutter speed is adjusted to a maximum of 1/250 in recording mode.) jAutomatic white balance (l 127) jAuto focus (l 127) ≥ Color balance and focus may not be adjusted automatically depending on light sources or scenes.
HDCSD9P-VQT1N45_ENG.book 36 ページ ２００７年１２月２６日 Recording (Basic) 2 水曜日 午後５時５７分 Recording motion pictures VIDEO This unit records high definition images that are compatible with the AVCHD format on an SD card. Sound is recorded with the Dolby Digital 5.1 Creator. Use an SD card that can be used for motion picture recording. (l 24) ＨG1920 R1h20m 0h00m00s ≥ Operate the mode switch while at the same time pressing in the lock release button A if changing from OFF to another mode.
HDCSD9P-VQT1N45_ENG.book 37 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ≥ When about 5 minutes have passed without any operation in recording pause, the unit automatically turns off to prevent the battery from running down. When you want to use the unit, turn it on again. This power save feature can also be set to [OFF].
HDCSD9P-VQT1N45_ENG.book 38 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Recording modes/approximate recordable time Switch the picture quality of the motion pictures to be recorded. Select the menu.
HDCSD9P-VQT1N45_ENG.book 39 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Quick start This unit will resume recording/pause mode about 0.6 seconds after the LCD monitor is reopened. ≥ When in quick start standby mode about 60% of the power used in recording pause mode is being consumed, so the recording time will be reduced. 1 Select the menu. (l 27) [SETUP] # [QUICK START] # [ON] 2 Close the LCD monitor while the mode switch is set to .
HDCSD9P-VQT1N45_ENG.book 40 ページ ２００７年１２月２６日 PRE-REC This prevents you from missing a shot. This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed. 1 Press the PRE-REC button. 水曜日 午後５時５７分 ≥ The image when pressing the recording start/stop button appears in thumbnail view, and it is different from the image when starting playback.
HDCSD9P-VQT1N45_ENG.book 41 ページ ２００７年１２月２６日 Recording (Basic) 3 水曜日 午後５時５７分 Recording still pictures PHOTO The number of pixels recorded for still pictures is 1920k1080. Still pictures can also be recorded while recording motion pictures. ≥ Operate the mode switch while at the same time pressing in the lock release button A if changing from OFF to another mode. 1 2 Operate the mode switch to select and open the LCD monitor. Focus indication: A B Press the button halfway.
HDCSD9P-VQT1N45_ENG.book 42 ページ ２００７年１２月２６日 To record still pictures clearly ≥ While recording motion pictures or during the PRE-REC operation, the following arrangements are applied so that motion picture recording takes preference over still picture recording. For vivid still pictures, we recommend pausing motion picture recording and taking still pictures after releasing the PRE-REC mode. jImage quality is different from ordinary still pictures. jPressing the button halfway is disabled.
HDCSD9P-VQT1N45_ENG.book 43 ページ ２００７年１２月２６日 Picture quality Selecting the picture quality. 水曜日 午後５時５７分 Number of recordable pictures Select the menu. (l 27) Picture size [PICTURE] # [PICT.QUALITY] # desired setting : Still pictures with a high picture quality are recorded. : Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality. ≥ If the [PICT.
HDCSD9P-VQT1N45_ENG.book 44 ページ ２００７年１２月２６日 Recording (Basic) 4 水曜日 午後５時５７分 Zoom in/out function VIDEO The maximum optical zoom ratio is 10k. ¬ Operate the mode switch to select . PHOTO 2.3 seconds. (The zoom speed does not vary when operating with the remote control.) When the zoom speed is high, the subject may not be focused easily. Digital zoom function If the zoom magnification exceeds 10k, then the digital zoom function will be activated.
HDCSD9P-VQT1N45_ENG.book 45 ページ ２００７年１２月２６日 Recording (Basic) 5 水曜日 午後５時５７分 Image stabilizer function VIDEO PHOTO Reduces the image shaking (jitter) due to hand movement. ¬ Operate the mode switch to select . Optical image stabilizer button [ , O.I.S.] Press this button to switch on/off the image stabilizer function. ≥[ ] appears on the screen. O.I.S.: Optical Image Stabilizer ≥ This function’s default setting is [ON].
HDCSD9P-VQT1N45_ENG.book 46 ページ ２００７年１２月２６日 Recording (Basic) 6 水曜日 午後５時５７分 Face detection & AE mode VIDEO PHOTO When a subject is backlit and appears darker, this function detects the face and automatically adjusts the brightness and picture quality so that the face is recorded clearly. ¬ Operate the mode switch to select . Face detection & AE button Press this button to switch on/off the face detection & AE mode. ≥[ ] appears on the screen.
HDCSD9P-VQT1N45_ENG.book 47 ページ ２００７年１２月２６日 Recording (Advanced) 1 水曜日 午後５時５７分 Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. ¬ Operate the mode switch to select 1 Press the cursor button, and icons will be displayed on the screen. ≥ The indication changes each time the cursor button is moved down. ≥ The operation icon appears or disappears each time the cursor button is pressed. . 2 (e.g.
HDCSD9P-VQT1N45_ENG.book 48 ページ ２００７年１２月２６日 Low light 水曜日 午後５時５７分 Ø Self-timer Tele macro ≥ The shaded operation icons are not displayed while recording. ≥ If you turn off the power or set the mode switch to , help mode, MagicPix, backlight compensation, self timer and tele macro functions are canceled. ≥ If you turn off the power, the fade function is canceled. Function Effect Fade VIDEO (Fade in) When you start recording, the image/audio gradually appears.
HDCSD9P-VQT1N45_ENG.book 49 ページ ２００７年１２月２６日 Function 水曜日 午後５時５７分 Effect Soft skin mode VIDEO PHOTO This makes skin colors appear softer for a more attractive appearance. This is more effective if you record a person closely from the torso up. VIDEO PHOTO This function allows you to record color images in very low light situations. (Minimum required illumination: approx. 1 lx) MagicPix Backlight compensation This makes the image brighter to prevent darkening of a backlit subject.
HDCSD9P-VQT1N45_ENG.book 50 ページ ２００７年１２月２６日 Fade: ≥ The thumbnails of scenes recorded using fade in become black (or white). Intelligent contrast control: ≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be clear. Help mode: ≥ When the help mode is used, functions cannot be set. ≥ When the help mode is used, motion pictures and still pictures cannot be recorded.
HDCSD9P-VQT1N45_ENG.book 51 ページ ２００７年１２月２６日 2 Recording (Advanced) 水曜日 午後５時５７分 Recording functions of menus Menus Guide line, 24p digital cinema, Wind noise reduction, Microphone setup, Microphone level, HD hi-speed burst shooting, Built-in flash, Red eye reduction, Shutter sound, Zebra, Color bar, Auto slow shutter, Digital cinema color ¬ Operate the mode switch to select . ≥ Set to [OFF] when the menus are not used. (Set [MIC SETUP] to [SURROUND] and [MIC LEVEL] to [AUTO].
HDCSD9P-VQT1N45_ENG.book 52 ページ ２００７年１２月２６日 Function 水曜日 午後５時５７分 Effect/Setting method Wind noise reduction VIDEO This is for reducing the wind noise coming into the built-in microphones depending on the wind strength. Select the menu. (l 27) [VIDEO] # [WIND CUT] # [ON] ≥ This function’s default setting is [ON]. Microphone setup VIDEO [SURROUND]: Sound is recorded with 5.1 ch surround microphone. [ZOOM MIC]: Directivity of the microphone is synchronized with the zoom operation.
HDCSD9P-VQT1N45_ENG.book 53 ページ ２００７年１２月２６日 Function 水曜日 午後５時５７分 Effect/Setting method Microphone level VIDEO AGC: Auto Gain Control [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETrAGC]: The desired recording level can be set. AGC will also be activated to reduce the amount of sound distortion. [SET]: AGC is not activated and so natural recording can be performed. When recording, the input level from the built-in microphones can be adjusted. 1 Select the menu.
HDCSD9P-VQT1N45_ENG.book 54 ページ ２００７年１２月２６日 Function 水曜日 午後５時５７分 Effect/Setting method HD hi-speed burst shooting PHOTO 72 still pictures are recorded at a rate of 24 per second. 1 Select the menu. (l 27) [PICTURE] # [HI-SPEED BURST] # [ON] 2 Press the button. ≥ Up to 72 still pictures can be taken in burst mode. ([ red during recording.) 3 ] flashes in Select the setting to save with the cursor button and press the cursor button. [REC ALL]: All pictures are stored.
HDCSD9P-VQT1N45_ENG.book 55 ページ ２００７年１２月２６日 Function 水曜日 午後５時５７分 Effect/Setting method Built-in flash PHOTO When the button is pressed, the flash is activated and the picture will be recorded. Use the built-in flash in order to record still pictures in dark places. Select the menu. (l 27) [PICTURE] # [FLASH] # [AUTO] or [ON] ≥ This function’s default setting is [AUTO]. ≥ When the button is pressed halfway, the flash indicator will appear in the bottom left corner of the screen.
HDCSD9P-VQT1N45_ENG.book 56 ページ ２００７年１２月２６日 Function 水曜日 午後５時５７分 Effect/Setting method Shutter sound You can add a shutter sound when recording still pictures. PHOTO Select the menu. (l 27) [PICTURE] # [SHTR SOUND] # [ON] ≥ This function’s default setting is [ON]. Zebra VIDEO PHOTO Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). Select the menu.
HDCSD9P-VQT1N45_ENG.book 57 ページ ２００７年１２月２６日 Function 午後５時５７分 Effect/Setting method Auto slow shutter VIDEO 水曜日 PHOTO You can record bright pictures even in dark places by slowing the shutter speed. Select the menu. (l 27) [ADVANCED] # [AUTO SLOW SHTR] # [ON] ≥ This function’s default setting is [ON]. ≥ The shutter speed is adjusted between 1/30 and 1/250 depending on the surrounding brightness. (When adjusting the shutter speed manually, it can be adjusted between 1/30 and 1/8000.
HDCSD9P-VQT1N45_ENG.book 58 ページ ２００７年１２月２６日 ≥ Image quality is different from ordinary still picture recording. To record more vivid still pictures, turn off this function before recording. (l 41) ≥ If you turn off the power or set the mode switch to , this function is canceled. Built-in flash: ≥ Do not block the flash with your hand or by other means. ≥ Set the flash to [OFF] where using a flash is prohibited. ≥ Do not use the flash with the ND filter (optional) attached.
HDCSD9P-VQT1N45_ENG.book 59 ページ ２００７年１２月２６日 Recording (Advanced) 3 水曜日 午後５時５７分 Manual recording functions VIDEO ¬ Operate the mode switch to select PHOTO . Set the AUTO/MANUAL/FOCUS switch to MANUAL. The icon shown in the illustration appears. White balance (l 61) Aperture adjustment (l 62) Manual shutter speed (l 62) Scene mode When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures.
HDCSD9P-VQT1N45_ENG.book 60 ページ ２００７年１２月２６日 Portrait mode ≥ If this mode is used indoors, the screen may flicker. If so, change the scene mode setting to [OFF]. 水曜日 午後５時５７分 Spotlight mode ≥ If the recording subject is extremely bright, the subject may become washed out and the periphery extremely darkened. Surf & snow mode ≥ If the subject is extremely bright, the recorded image may become washed out. Manual focus adjustment If auto focusing is difficult due to the conditions, then use manual focus.
HDCSD9P-VQT1N45_ENG.book 61 ページ ２００７年１２月２６日 水曜日 午後５時５７分 White balance The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ≥ Set the AUTO/MANUAL/FOCUS switch to MANUAL. (l 59) 1 2 Move the cursor button to select [ ]. ∫ To set the white balance manually 1 Select [ subject. ], fill the screen with a white 2 Select [ ]. Select the white balance mode.
HDCSD9P-VQT1N45_ENG.book 62 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Manual shutter speed/aperture adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Aperture: Adjust it when the screen is too bright or too dark. ≥ Set the AUTO/MANUAL/FOCUS switch to MANUAL. (l 59) 1 2 Move the cursor button to select [ ] (aperture) or [ ] (shutter speed). Make the adjustment. A Shutter speed: 1/30 to 1/8000 ≥ If [AUTO SLOW SHTR] is set to [OFF], the shutter speed will be set between 1/60 and 1/8000.
HDCSD9P-VQT1N45_ENG.
HDCSD9P-VQT1N45_ENG.book 64 ページ ２００７年１２月２６日 Playback 1 水曜日 午後５時５７分 Motion picture playback VIDEO A Lock release button ≥ Operate the mode switch while at the same time pressing in the lock release button if changing from OFF to another mode. 1 Operate the mode switch to select . 2 Select [ ] (motion picture playback) with the cursor button. B Motion picture playback 64 VQT1N45 3 Select the scene to be played back and press the cursor button.
HDCSD9P-VQT1N45_ENG.book 65 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ≥ Press the cursor button while selecting the play mode select button to switch to the thumbnails of the following scenes. (All scenes): Playback of all scenes (By date): Playback of scenes recorded on a selected date (l 67) (Intelligent scene selection): Playback of the detected scenes that have been recorded vividly (l 67) ∫ Fast forward/rewind playback 4 ≥ The fast forward/rewind speed increases if you move the cursor button again.
HDCSD9P-VQT1N45_ENG.book 66 ページ ２００７年１２月２６日 ∫ Slow-motion playback 1 2 Pause the playback. Move and hold the cursor button right. (Move and hold the cursor button left to play back slow-motion pictures in reverse.) Operating with the remote control Press the E or D button during playback. SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP SKIP ∫ Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Pause the playback. 2 Move the cursor button right.
HDCSD9P-VQT1N45_ENG.book 67 ページ ２００７年１２月２６日 Playing back motion pictures by date Scenes recorded on the same day can be played back in succession. 1 Select (By date), then press the cursor button. 水曜日 午後５時５７分 ≥ Even if scenes are recorded on the same day, they are grouped separately in the following cases.
HDCSD9P-VQT1N45_ENG.book 68 ページ ２００７年１２月２６日 ≥ The following motion pictures are skipped jWhen motion pictures are recorded while moving the unit quickly jWhen the unit shakes jWhen the image contrast is too strong such as when using backlight: jWhen scenes are too dark jWhen motion pictures are recorded while the unit is upside down or downward jWhen the subject is out of focus ≥ Up to 9 sections can be skipped for a single scene. ≥ When motion pictures are skipped, the image stops momentarily.
HDCSD9P-VQT1N45_ENG.book 69 ページ ２００７年１２月２６日 Playback 2 水曜日 午後５時５７分 Still picture playback PHOTO A Lock release button ≥ Operate the mode switch while at the same time pressing in the lock release button if changing from OFF to another mode. 1 Operate the mode switch to select . 2 Select [ ] (still picture playback) with the cursor button. 3 Select the still picture to be played back and press the cursor button.
HDCSD9P-VQT1N45_ENG.book 70 ページ ２００７年１２月２６日 ≥ Select the play mode select button and press the cursor button to switch the following picture displays to thumbnail view. (All scenes): Playback of all still pictures (By date): Playback of still pictures recorded on a selected date (l 71) 4 Select the playback operation with the cursor button. 1/;: Slide show (playback of the still pictures in numerical order) start/pause. 2;: Plays back the previous picture. ;1: Plays back the next picture.
HDCSD9P-VQT1N45_ENG.book 71 ページ ２００７年１２月２６日 Playing back still pictures by date Still pictures recorded on the same day can be played back in succession. 1 Select (By date), then press the cursor button. 2 Select the playback date, then press the cursor button. 水曜日 午後５時５７分 ≥ Even if still pictures are recorded on the same day, they are grouped separately in the following cases.
HDCSD9P-VQT1N45_ENG.book 72 ページ ２００７年１２月２６日 Editing 1 水曜日 午後５時５７分 Deleting scenes/still pictures VIDEO PHOTO Important: The deleted scenes/still pictures cannot be restored. ¬ Operate the mode switch to select . To delete by confirming images being played back Press the button while scenes or still pictures to be deleted are being played back. ≥ When the confirmation message appears, select [YES], then press the cursor button.
HDCSD9P-VQT1N45_ENG.book 73 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ≥ You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] # [ALL SCENES] or [SELECT]. ≥ You can also delete still pictures by pressing the MENU button, selecting [PICT. SETUP] # [DELETE] # [ALL SCENES] or [SELECT]. ≥ When play mode is set to [INTEL. SCENE], scenes cannot be deleted. ≥ To delete an unwanted part of a scene, divide the scene first, and then delete the unnecessary part.
HDCSD9P-VQT1N45_ENG.book 74 ページ ２００７年１２月２６日 Editing 2 水曜日 午後５時５７分 Dividing a scene to delete VIDEO To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. ¬ Select [ 1 ] (motion picture playback) while the mode switch is set to Select the menu. (l 27) [EDIT SCENE] # [DIVIDE] # [SET] 2 . (l 64) To continue dividing other scenes Repeat steps 2-3 before completing dividing in step 4.
HDCSD9P-VQT1N45_ENG.book 75 ページ ２００７年１２月２６日 Editing 3 水曜日 午後５時５７分 Protecting scenes/still pictures VIDEO PHOTO Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures on an SD card, formatting the SD card will delete them.) ¬ Operate the mode switch to select 1 . Select the menu. (l 27) [VIDEO SETUP] or [PICT. SETUP]# [SCENE PROTECT] # [YES] 2 Select the scene/still picture to be protected and then press the cursor button.
HDCSD9P-VQT1N45_ENG.book 76 ページ ２００７年１２月２６日 Editing 4 水曜日 午後５時５７分 DPOF setting PHOTO You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card.
HDCSD9P-VQT1N45_ENG.book 77 ページ ２００７年１２月２６日 Editing 5 水曜日 午後５時５７分 Formatting VIDEO PHOTO Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Back up important data on a PC, DVD disc etc. 1 Select the menu. (l 27) [SETUP] # [FORMAT CARD] # [YES] ≥ When the confirmation message appears, select [YES], then press the cursor button. ≥ When formatting is complete, press the MENU button to exit the message screen.
HDCSD9P-VQT1N45_ENG.book 78 ページ ２００７年１２月２６日 With a TV 1 水曜日 午後５時５７分 Watching Video/Pictures on your TV VIDEO PHOTO The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the AC adaptor to free you from worrying about the battery running down.
HDCSD9P-VQT1N45_ENG.book 79 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ≥ Check that the plugs are inserted as far as they go. ≥ We recommend using Panasonic HDMI mini cables (optional). Part numbers: RP-CDHM15 (1.5 m/4.9 feet), RP-CDHM30 (3.0 m/9.8 feet) ≥ Do not use any other component cables except the supplied one. ≥ The component terminal is for outputting images only so be sure to also connect the AV cable. (It is not necessary to connect the yellow plug.) ≥ Do not use any other AV cables except the supplied one.
HDCSD9P-VQT1N45_ENG.book 80 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ∫ To watch images with a 16:9 aspect ratio on a regular TV (4:3) ∫ To display the on-screen information on the TV When playing back motion pictures or still pictures recorded on this unit with a 16:9 aspect ratio on a TV with a 4:3 aspect ratio, the images on the screen may be squeezed horizontally. In this case, change the menu setting to play back the pictures in the original aspect ratio.
HDCSD9P-VQT1N45_ENG.book 81 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Connecting with a HDMI mini cable What is HDMI? HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound.
HDCSD9P-VQT1N45_ENG.book 82 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Listening in 5.1 channel sound If you connect this unit and an AV amplifier with a HDMI terminal with a HDMI mini cable and then playback, you can listen to 5.1 channel sound recorded from the internal microphones. ≥ Please read the operating instructions for the AV amplifier, speakers and TV for more information about how to connect them etc.
HDCSD9P-VQT1N45_ENG.book 83 ページ ２００７年１２月２６日 With a TV 2 水曜日 午後５時５７分 Playback using VIERA Link™ (HDAVI Control™) VIDEO PHOTO What is the VIERA Link? ≥ VIERA Link™ is a new name for EZ Sync™. ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to an VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
HDCSD9P-VQT1N45_ENG.book 84 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ≥ If the TV has two or more HDMI input terminals, it is recommended to connect this unit to HDMI2 or HDMI3. ≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV for how to set etc.) ≥ If you are not using VIERA Link, set [VIERA Link] to [OFF]. ∫ Other linked operations Turning the power off: If you use the remote control for the TV to turn off the power, the power on this unit also turns off.
HDCSD9P-VQT1N45_ENG.
HDCSD9P-VQT1N45_ENG.book 86 ページ ２００７年１２月２６日 With other products 1 水曜日 午後５時５７分 Connecting a DVD burner to copy to/play back a disc VIDEO PHOTO Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner VW-BN1 (optional) to this unit using a Mini AB USB connection cable (supplied with VW-BN1). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
HDCSD9P-VQT1N45_ENG.book 87 ページ ２００７年１２月２６日 4 Insert the disc in the DVD burner. 5 (When copying) 水曜日 午後５時５７分 Select [BURN DISC] and press the cursor button. (When playing back) Select [PLAY DISC] and press the cursor button. ≥ Refer to page 90 for how to play back the copied discs. Copying to discs ≥ Motion pictures are copied as AVCHD format high definition images. ≥ We recommend preparing the necessary number of discs that can be used for copying (l 86), and spare discs.
HDCSD9P-VQT1N45_ENG.book 88 ページ ２００７年１２月２６日 (Only when [SELECT DATE] is selected in step 2) Select the date you want to copy and press the cursor button. 5 (Only when [SELECT SCENES] is selected in step 2) Select [START] and press the cursor button. 午後５時５７分 (Only when [SELECT DATE] is selected in step 2) Press the MENU button. MENU 6 ≥ When the cursor button is pressed again, the selected date will be canceled. ≥ Up to 99 dates can be selected in succession.
HDCSD9P-VQT1N45_ENG.book 89 ページ ２００７年１２月２６日 水曜日 午後５時５７分 About the approximate time it takes for copying to a disc To copy motion pictures to the full capacity of a disc Disc type Copy time DVD-RAM Approx. 50 min to 80 min DVD-RW* Approx. 35 min to 75 min DVD-R* Approx.
HDCSD9P-VQT1N45_ENG.book 90 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Playing back the copied disc ≥ Only discs that have been copied by connecting this unit to the DVD burner or where motion pictures have been recorded in AVCHD format can be played back. It may not be possible to play back discs recorded on other devices. 1 Connect this unit to the DVD burner to prepare for playback. (l 86) 2 Use the cursor button to select [ ] disc playback tab.
HDCSD9P-VQT1N45_ENG.book 91 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Managing the copied disc (Formatting/Auto protect/Displaying disc information) ≥ Connect this unit to the DVD burner and then select [PLAY DISC]. (l 86) ∫ Formatting discs This is for initializing DVD-RAM and DVD-RW discs. ≥ Select [ ] tab. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Back up important data on a PC etc. Select the menu.
HDCSD9P-VQT1N45_ENG.book 92 ページ ２００７年１２月２６日 With other products 2 水曜日 午後５時５７分 Dubbing images onto other video device VIDEO Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to. A/V ≥ The channel set will differ depending on the terminal to which the unit is connected.
HDCSD9P-VQT1N45_ENG.book 93 ページ ２００７年１２月２６日 With other products 3 水曜日 午後５時５７分 With a printer (PictBridge) PHOTO To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) PictBridge is an industry standard from the Camera & Imaging Products Association (CIPA) for direct printing. It allows images to be printed directly from digital cameras to a printer, without having to connect the camera to a PC.
HDCSD9P-VQT1N45_ENG.book 94 ページ ２００７年１２月２６日 5 Press the MENU button to display the PictBridge menus. 8 水曜日 午後５時５７分 Select the desired layout setting on [PAGE LAYOUT]. MENU 6 Select the date print setting on [DATE PRINT]. [STANDARD]: Layout specific to the printer [ ]: No frame print [ ]: Frame print ≥ You cannot set page layouts not supported on the printer. ≥ If the printer is not capable of date printing, this setting is unavailable.
HDCSD9P-VQT1N45_ENG.
HDCSD9P-VQT1N45_ENG.book 96 ページ ２００７年１２月２６日 Before using Data type 1 水曜日 What you can do with a PC Available function Writing data to media*1: A Motion/Still pictures B Motion pictures Copying data between media*1: C Motion pictures Software required CD-ROM (supplied): HD Writer 2.
HDCSD9P-VQT1N45_ENG.book 97 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Important Notice ≥ Do not insert a disc recorded in AVCHD format with HD Writer 2.5E in a device that does not support the AVCHD format. In some cases the disc may get stuck in the device. The disc will not play back on devices that do not support the AVCHD format. ≥ When inserting a disc containing recorded motion pictures into other devices, a message prompting you to format the disc may be displayed.
HDCSD9P-VQT1N45_ENG.book 98 ページ ２００７年１２月２６日 水曜日 午後５時５７分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
HDCSD9P-VQT1N45_ENG.book 99 ページ ２００７年１２月２６日 Before using 2 水曜日 午後５時５７分 Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible DVD writer drive and media are necessary for writing to a DVD.) ≥ Operation is not guaranteed in the following cases.
HDCSD9P-VQT1N45_ENG.book 100 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Necessary software Windows Vista: DirectX 10 Windows XP/2000: DirectX 9.0c ≥ If you install the software on a PC that is not compatible with DirectX 9.0c, the PC may not work properly. If you are unsure whether or not your PC is compatible, contact the maker of your PC. Sound DirectSound Support Interface USB port [Hi-Speed USB (USB 2.
HDCSD9P-VQT1N45_ENG.book 101 ページ Setup 1 ２００７年１２月２６日 水曜日 午後５時５７分 Installation When installing the software, log on to your PC as the Administrator (or with a user name with equivalent authorization) or with the user name for a standard user account. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed.
HDCSD9P-VQT1N45_ENG.book 102 ページ 5 ２００７年１２月２６日 After the installation is complete, restrictions 6 水曜日 午後５時５７分 Click [Finish]. are displayed. Check the contents, then close the window. The PC must be rebooted for the application to work. ∫ Uninstalling HD Writer 2.5E Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program]. 2 Select [HD Writer 2.
HDCSD9P-VQT1N45_ENG.book 103 ページ Setup 2 ２００７年１２月２６日 水曜日 午後５時５７分 Connection and recognition After the software applications are installed, this unit must be connected to the PC and be correctly recognized by the PC. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 ≥ If a battery is used, operation is not possible when this unit is connected to a PC.
HDCSD9P-VQT1N45_ENG.book 104 ページ ２００７年１２月２６日 水曜日 午後５時５７分 About the PC display When the unit is connected to a PC, it is recognized as an external drive. ≥ [Removable Disk] (Example: ) is displayed in [My Computer (Computer)]. Example folder structure of an SD card: 1 Up to 999 still pictures in JPEG format* Removable Disk DCIM 100CDPFQ 101CDPFR MISC PRIVATE AVCHD AVCHDTN BDMV IISVPL We recommend using HD Writer 2.5E to copy or write back motion picture data recorded on an SD card.
HDCSD9P-VQT1N45_ENG.book 105 ページ Using with a PC 1 ２００７年１２月２６日 水曜日 午後５時５７分 Starting HD Writer 2.5E ≥ When using HD Writer 2.5E on Windows XP/2000, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer 2.5E on Windows Vista, log on to your computer as Administrator (or with a login name equally authorized) or with the user name for a standard user account.
HDCSD9P-VQT1N45_ENG.book 106 ページ Using with a PC 2 ２００７年１２月２６日 水曜日 午後５時５７分 If using Macintosh ≥ HD Writer 2.5E is not available for Macintosh. ∫ Operating environment for the card reader function (mass storage) PC Macintosh OS Mac OS X 10.4 CPU PowerPC G5 (1.8 GHz or higher) Intel Core Duo Intel Core Solo RAM 64 MB or more Interface USB port ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used.
HDCSD9P-VQT1N45_ENG.
HDCSD9P-VQT1N45_ENG.book 108 ページ 1 Indications ２００７年１２月２６日 水曜日 午後５時５７分 Indications ∫ Recording indications Motion picture recording White balance (l 61) Auto white balance Indoor mode (recording under incandescent lamp) Outdoor mode Manual adjustment mode AWB ＨG 1920 +1 90min 0h00m00s R1h20m MNL PRE-REC MF AWB 1/100 OPEN 0dB JAN 1 2008 12:34PM 1/100 Shutter speed (l 62) OPEN, F2.
HDCSD9P-VQT1N45_ENG.book 109 ページ ２００７年１２月２６日 Intelligent contrast control (l 48) ± (White) ¥ (Green) Focus indication (l 41) Ø10, Ø2 Self-Timer recording (l 49) ß/ßA/ Flash (l 55) ßi/ßj Flash level (l 55) 水曜日 午後５時５７分 ∫ Playback indications Motion picture playback Red eye reduction (l 55) , Still picture quality (l 43) Still picture playback Number of recording pixels for still pictures (l 43) 1920k1080 2.
HDCSD9P-VQT1N45_ENG.book 110 ページ ２００７年１２月２６日 100-0001 Still picture folder/file name (l 69) PictBridge When a printer compatible with PictBridge is connected (l 93) 1 DPOF already set (to more than 1) (l 76) Protected still pictures (l 75) 2.1Ｍ Number of recording pixels for still pictures (l 43) 1920k1080 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
HDCSD9P-VQT1N45_ENG.book 111 ページ Indications 2 ２００７年１２月２６日 水曜日 午後５時５７分 Messages Major confirmation/error messages to be indicated on the LCD monitor in text. CANNOT BE USED DUE TO INCOMPATIBLE DATA. CANNOT RECORD - INCOMPATIBLE CONTROL DATA. The recording format of the SD card is different so it cannot be used. Save the data on the SD card to a PC, then use the SD card after formatting it on this unit. CHECK CARD. This card is not compatible or it cannot be recognized by the unit.
HDCSD9P-VQT1N45_ENG.book 112 ページ ２００７年１２月２６日 水曜日 午後５時５７分 DISCONNECT USB CABLE. The unit cannot correctly establish the connection to the PC or printer. Disconnect and then reconnect the USB cable. DISCONNECT USB CABLE. You cannot turn off this unit while it is connected to a PC or a DVD burner. About recovery If faulty management information is found when a SD card is accessed, one of the following messages may appear. Be sure to follow the messages. (Repairing may take time depending on the error.
HDCSD9P-VQT1N45_ENG.book 113 ページ Helpful hints 1 ２００７年１２月２６日 水曜日 午後５時５７分 Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
HDCSD9P-VQT1N45_ENG.
HDCSD9P-VQT1N45_ENG.book 115 ページ Helpful hints 2 Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. ２００７年１２月２６日 水曜日 午後５時５７分 Troubleshooting Check points ≥ Charge the battery using the AC adaptor. (l 20) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Make sure the LCD monitor is opened.
HDCSD9P-VQT1N45_ENG.book 116 ページ Problem This unit cannot be operated though it is turned on. This unit does not operate normally. ２００７年１２月２６日 水曜日 午後５時５７分 Check points ≥ The unit cannot be operated if the LCD monitor is not opened. ≥ Press the RESET button. (l 118) If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again.
HDCSD9P-VQT1N45_ENG.book 117 ページ Problem ２００７年１２月２６日 水曜日 午後５時５７分 Check points Recorded still pictures are not clear. ≥ If you are trying to record small or finely detailed objects with [PICT.QUALITY] set at [ ], the images may break up into a mosaic-like pattern. Record with [PICT.QUALITY] set at [ ] instead. (l 43) Some playback images are skipped automatically. ≥ The playmode is set to Change the playmode to Although this unit is correctly connected to a TV, images cannot be seen.
HDCSD9P-VQT1N45_ENG.book 118 ページ Problem The indication disappears. The screen is frozen. No operation can be performed. White round spots like soap bubbles appear on the recorded picture. “PUSH THE RESET SWITCH.” is displayed. ２００７年１２月２６日 水曜日 午後５時５７分 Check points ≥ No operation can be performed on this unit when it is connected to a PC. ≥ Turn off the power to this unit. If the power cannot be turned off, press the RESET button, or remove the battery or AC adaptor and then reattach it.
HDCSD9P-VQT1N45_ENG.book 119 ページ Problem ２００７年１２月２６日 水曜日 午後５時５７分 Check points VIERA Link does not work. ≥ Connect with a HDMI mini cable (optional). (l 83) ≥ Press the MENU button, then select [SETUP] # [VIERA Link] # [ON] with the cursor button. (l 83) ≥ Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input. (For details on how to switch input, please read the operating instructions for the TV.
HDCSD9P-VQT1N45_ENG.book 120 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. * Just how smoothly the scenes will be played back depends on the playback unit.
HDCSD9P-VQT1N45_ENG.book 121 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ∫ When PRE-REC was used for recording 1 Normal recording 2 PRE-REC recording A The picture momentarily stops at the end of the last scene that was recorded normally before PREREC recording. ∫ When the recording mode was changed from HA/HG/HX to HE or from HE to HA/HG/HX A The picture momentarily stops where the scenes switch between HA/HG/HX and HE modes. B Playback is smooth if the same mode is used or the mode is switched among HA, HG and HX.
HDCSD9P-VQT1N45_ENG.book 122 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ∫ When deleting scenes ∫ Example 1: Deleting scenes midway through a sequence of scenes. 1 Scene to be deleted A The image will be still for several seconds wherever a scene was deleted. B The images of consecutive scenes where they are no deletions are played back smoothly one after another. ∫ Example 2: When recording again after having deleted the last scene. 1 2 A B Scene to be deleted A new scene is recorded here.
HDCSD9P-VQT1N45_ENG.book 123 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ∫ When editing scenes on a PC using a software such as HD Writer 2.5E ∫ Example 1: When scenes were selected using HD Writer 2.5E and output to the media B A If scenes were dragged and dropped from the scene display area A and output to the media, the images will be still for several seconds wherever one scene changes to the next.
HDCSD9P-VQT1N45_ENG.book 124 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
HDCSD9P-VQT1N45_ENG.book 125 ページ ２００７年１２月２６日 About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls. In cold areas, the full charge indication may not appear or the low battery indication may appear about 5 minutes after starting use. At high temperatures, the protection function may be triggered, making it impossible to use the unit.
HDCSD9P-VQT1N45_ENG.book 126 ページ ２００７年１２月２６日 LCD monitor ≥ When the LCD monitor gets dirty, wipe it with a dry soft cloth. ≥ In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with soft dry cloth. ≥ When the unit has become very cold, for example due to storage in a cold area, its LCD monitor will be slightly darker than usual immediately after the power is turned on. The normal brightness will be restored when the unit’s internal temperature rises.
HDCSD9P-VQT1N45_ENG.book 127 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Explanation of terms Automatic white balance White balance adjustment recognizes the color of light and adjusts so the white color will become a purer white. The unit determines the hue of light that comes through the lens, thereby judging the recording condition, and selects the closest hue setting. This is called automatic white balance adjustment.
HDCSD9P-VQT1N45_ENG.book 128 ページ ２００７年１２月２６日 Recording a subject behind dirty or dusty window The subject behind the window will not be focused because the focus is on the dirty window. Similarly, when recording something on the opposite side of a road with heavy traffic, a vehicle that happens to pass by may be brought into focus.
HDCSD9P-VQT1N45_ENG.book 129 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 5.8 W Signal system 1080/60i Recording format AVCHD format compliant Image sensor 1/6z 3CCD image sensor Total: 560 Kk3 Effective pixels: Motion picture: 520 Kk3 Still picture: 520 Kk3 Lens Auto Iris, F1.8 to F2.8 Focal length: 3.0 mm to 30.
HDCSD9P-VQT1N45_ENG.book 130 ページ ２００７年１２月２６日 水曜日 午後５時５７分 USB Card reader/writer function (No copyright protection support) Hi-Speed USB (USB 2.0), USB terminal Type Mini AB PictBridge-compliant Flash Available range: Approx. 1.0 m to 2.5 m (3.3 feet to 8.2 feet) Dimensions 65 mm (W)k67 mm (H)k126 mm (D) [2.56 q (W)k2.638 q (H)k4.96 q (D)] (excluding projecting parts) Mass (Weight) Approx. 275 g (Approx. 0.606 lbs.
HDCSD9P-VQT1N45_ENG.book 131 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Still pictures Recording media SD Memory Card: 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (FAT12 and FAT16 system corresponding) SDHC Memory Card: 4 GB, 8 GB, 16 GB (FAT32 system corresponding) Compression JPEG (Design rule for Camera File system, based on Exif 2.2 standard), DPOF corresponding Picture size 1920k1080 Refer to page 43 for the number of recordable pictures.
HDCSD9P-VQT1N45_ENG.book 132 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Optional accessories Accessory No.
HDCSD9P-VQT1N45_ENG.book 133 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Accessory Order Form (For USA Customers) Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
HDCSD9P-VQT1N45_ENG.book 134 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Request for Service Notice (USA Only) Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
HDCSD9P-VQT1N45_ENG.book 135 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Limited Warranty (For USA Customers) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. Ave. 65 de Infantería, Km. 9.
HDCSD9P-VQT1N45_ENG.book 136 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Customer Services Directory Service in Canada: As per Servicentre listed in Canadian warranty information on page 137. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.
HDCSD9P-VQT1N45_ENG.book 137 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Warranty (For Canadian Customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
HDCSD9P-VQT1N45_ENG.book 138 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Index ∫ Numerics 24p digital cinema . . . . . . . . . . . . . . . . . . . . .51 5.1 channel . . . . . . . . . . . . . . . . . . . . . . . . . .82 ∫A A/V terminal . . . . . . . . . . . . . . . . . . . .17, 78, 92 AC adaptor . . . . . . . . . . . . . . . . . . . .20, 23, 125 Aperture . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Auto focus . . . . . . . . . . . . . . . . . . . . . . . . . .127 Auto Ground-Directional Standby (AGS) . .
HDCSD9P-VQT1N45_ENG.book 139 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ∫R Recordable time . . . . . . . . . . . . . . . . . . . .22, 38 Recording lamp . . . . . . . . . . . . . . . . . . . . . . .28 Recording modes . . . . . . . . . . . . . . . . . . . . . .38 Recording time elapsed . . . . . . . . . . . . . . . . .37 Red eye reduction . . . . . . . . . . . . . . . . . . . . .55 Remaining number of still pictures . . . . . . . . .42 Remaining time left for recording . . . . . . . . . .37 Remote control . . . . . . .
HDCSD9P-VQT1N45_ENG.book 140 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Spanish Quick Use Guide/Guía española para el uso rápido ∫ Carga de la batería Luz indicadora de carga [CHARGE] A ∫ Cómo encender la unidad Encienda la alimentación girando el interruptor del modo a o mientras pulsa el botón de desbloqueo A. Encendida: Carga en curso Apagada: Carga completada 1 2 Conecte el cable de CA al adaptador de CA y a la toma de CA.
HDCSD9P-VQT1N45_ENG.book 141 ページ ２００７年１２月２６日 1 2 Ajuste el interruptor del modo a OFF. Abra la tapa de la tarjeta SD mientras desplaza la palanca SD CARD OPEN B. 3 Inserte/extraiga la tarjeta SD. ≥ Coloque el lado del terminal C en la dirección mostrada en la figura y empújelo hasta que tope manteniéndolo derecho. ≥ Para extraer la tarjeta SD, presione en el centro de la tarjeta SD y luego tire de ella derecho hacia fuera. 4 Cierre firmemente la tapa de la tarjeta SD.
HDCSD9P-VQT1N45_ENG.book 142 ページ ２００７年１２月２６日 水曜日 午後５時５７分 ∫ Reproducción de películas ∫ Reproducción de fotografías 1) Actúe en el interruptor del modo para seleccionar . 2) Seleccione [ ] (reproducción de películas) A usando el botón cursor. 1) Actúe en el interruptor del modo para seleccionar 2) Seleccione [ ] (reproducción de fotografías) A usando el botón cursor. 3) Seleccione la escena a ser reproducida, luego pulse el botón cursor.
HDCSD9P-VQT1N45_ENG.
HDCSD9P-VQT1N45_ENG.book 144 ページ ２００７年１２月２６日 水曜日 午後５時５７分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 P VQT1N45 S0108MK0 C © 2008 Matsushita Electric Industrial Co., Ltd.
