HDCSD20&SD25&HS20P-VQT1Y00_eng.book 1 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Operating Instructions High Definition Video Camera Model No. HDC-SD20P/PC HDC-TM20P/PC HDC-HS20P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 2 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Things You Should Know Date of Purchase Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the back of your camera.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 3 ページ ２００８年１２月２２日 月曜日 午後８時１６分 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 4 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Batteries 1 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 5 ページ ２００８年１２月２２日 月曜日 午後８時１６分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 6 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 7 ページ ２００８年１２月２２日 however, parts of the explanation refer to different models. ≥ Depending on the model, some functions are not available. ≥ Features may vary, so please read carefully. ∫ Cards that you can use with this unit SD Memory Card and SDHC Memory Card ≥ 4 GB (or more) Memory Cards that do not have the SDHC logo are not based on SD Memory Card Specifications. ≥ Refer to page 29 for more details on SD cards.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 8 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Contents Accessories.................................................. 10 Features........................................................ 11 Quick Guide.................................................. 12 Preparation Before using [1] Handling of Built-in Memory and HDD (Hard disk drive) [HDC-TM20/ HDC-HS20] .........................................15 Handling of built-in memory [HDC-TM20] ........................................
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 9 ページ ２００８年１２月２２日 月曜日 Playback 午後８時１６分 With a PC Before using Deleting scenes/still pictures ........... 88 Dividing a scene to partially delete ... 90 Protecting scenes/still pictures ....... 91 DPOF setting...................................... 92 Copying between SD card and Built-in Memory/HDD [HDC-TM20/HDC-HS20] ......................93 Confirming remaining capacity on the copy destination............................. 93 Copying .................................
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 10 ページ Accessories Check the accessories before using this unit.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 11 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Features ∫ Very clear high definition pictures This unit can record detailed high definition images. High definition images (1920k1080)* A Number of available scan lines 1080 * If the recording mode is HA/HG/HX. Standard images (720k480) B Number of available scan lines 480 What is AVCHD? This is a format for recording and playing back highly detailed high definition images. Images are recorded based on the MPEG-4 AVC/H.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 12 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Quick Guide ∫ Charging the battery Charging lamp [CHARGE] A Lights up: Charging Goes off: Charging completed 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Insert the battery into the AC adaptor by aligning the arrows. ∫ Inserting the battery 1) Open the LCD monitor. ≥ Check that the access lamp has gone off. 2) Open the SD card cover by sliding the OPEN lever B. 3) Insert/remove the SD card.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 13 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ∫ How to use the touch screen ∫ Recording motion pictures You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. 1) Change the mode to . 2) Open the LCD monitor. ≥ For users who have , proceed to step 4. 3) Press the MENU button, then touch [MEDIA SELECT] # [Built-in Memory] or [SD CARD].
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 14 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ∫ Motion picture playback ∫ Still picture playback 1) Change the mode to . 2) Touch the play mode select icon A to select desired media to be played back. 1) Change the mode to . 2) Touch the play mode select icon A to select desired media to be played back. ≥ Touch [VIDEO/SD CARD] to play back the SD card. ≥ Touch [PICTURE/SD CARD] to play back the SD card. Touch [VIDEO/Built-in Memory] to play back the built-in memory.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 15 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation Before using 1 Handling of Built-in Memory and HDD (Hard disk drive) [HDC-TM20/HDC-HS20] : This unit is equipped with the built-in 16 GB memory. When using this component, pay attention to the following points. : This unit is equipped with the built-in 80 GB HDD. While the HDD is capable of storing a large amount of data, there are a few things to look out for.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 16 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Handling of HDD [HDC-HS20] ∫ Do not expose the HDD to vibrations and shocks. Due to the environment and handling conditions, the HDD may be subject to partial damages or may not be able to read, record, and play back data. Do not expose the unit to vibrations or shock, and do not turn off the power during recording or playback.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 17 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation 2 Before using Parts identification and handling [HDC-SD20/HDC-TM20] 1 2 3 45 6 7 8 9 11 12 13 17 18 19 1 A/V 14 15 16 LCD monitor (Touch screen) (l 33, 41) ≥ It can open up to 90o. ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 18 ページ ２００８年１２月２２日 午後８時１６分 22 Lens hood Rotate the lens hood counter-clockwise A to remove it. In order to attach it, place into slot B, and then rotate it clockwise C. 17 Access lamp [ACCESS] (l 15, 30) 18 Card slot (l 30) 19 SD card cover (l 30) 20 月曜日 21 22 ≥ When fitting the tele conversion lens (VW-T4314H; optional) or the wide conversion lens (VW-W4307H; optional), first remove the lens hood.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 19 ページ ２００８年１２月２２日 32 Grip belt Adjust the length of the grip belt so that it fits your hand. 月曜日 午後８時１６分 Be sure that the grip belt stays clear of the video light B when the tripod is used as shown below. 1 2 3 33 Flip the belt. Adjust the length. Replace the belt. Shoulder strap fixture 34 35 34 Battery release lever [BATT] (l 24) 35 Tripod receptacle This is a hole for attaching the unit to the optional tripod.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 20 ページ ２００８年１２月２２日 月曜日 午後８時１６分 [HDC-HS20] 1 2 3 45 6 7 8 9 11 12 13 17 18 19 1 A/V 14 15 16 LCD monitor (Touch screen) (l 33, 41) ≥ It can open up to 90o. ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 21 ページ 20 ２００８年１２月２２日 月曜日 午後８時１６分 22 Lens hood Rotate the lens hood counter-clockwise A to remove it. In order to attach it, place into slot B, and then rotate it clockwise C. 21 22 23 24 25 20 Built-in flash (l 71) 21 Lens (LEICA DICOMAR) Lens cover A ≥The lens cover opens in recording mode. (l 31) 31 ≥ When fitting the tele conversion lens (VW-T4314H; optional) or the wide conversion lens (VW-W4307H; optional), first remove the lens hood.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 22 ページ ２００８年１２月２２日 33 Grip belt Adjust the length of the grip belt so that it fits your hand. 月曜日 午後８時１６分 Be sure that the grip belt stays clear of the video light B when the tripod is used as shown below. 1 2 3 34 Flip the belt. Adjust the length. Replace the belt. Shoulder strap fixture 35 36 35 Battery release lever [BATT] (l 24) 36 Tripod receptacle This is a hole for attaching the unit to the optional tripod.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 23 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation Setup 1 Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBG070/VW-VBG130/VW-VBG260/VW-VBG6. ≥ This unit has a function to distinguish the batteries that can be used, and the batteries (VW-VBG070/VW-VBG130/VW-VBG260/VW-VBG6) are compatible with this function. (The batteries that are not compatible to this function cannot be used.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 24 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ≥ We recommend using Panasonic batteries (l 10, 25, 26, 152). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 25 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC (77 oF)/humidity: 60% HDC-SD20 Battery model number [Voltage/Capacity (minimum)] Charging time Maximum continuously recordable time Actual recordable time Supplied battery/ VW-VBG070 (optional) [7.2 V/725 mAh] 1 h 35 min 1 h 15 min 45 min VW-VBG130 (optional) [7.2 V/1250 mAh] 2 h 35 min 2 h 10 min 1 h 20 min VW-VBG260 (optional) [7.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 26 ページ ２００８年１２月２２日 月曜日 午後８時１６分 HDC-HS20 Battery model number [Voltage/Capacity (minimum)] Supplied battery/ VW-VBG070 (optional) [7.2 V/725 mAh] VW-VBG130 (optional) [7.2 V/1250 mAh] VW-VBG260 (optional) [7.2 V/2500 mAh] VW-VBG6 (optional)* [7.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 27 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then ( ) will flash. ≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. The actual time can vary depending on your actual use.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 28 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Connecting to the AC outlet Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit. DC IN A DC output terminal B DC input terminal Insert the DC cable matching the [ ] mark of the DC input terminal.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 29 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation Setup 2 Preparation of SD cards This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. When using an SDHC Memory Card on another device, confirm that the device supports the SDHC Memory Card. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 30 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 97) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. before proceeding with the formatting.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 31 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation 3 Setup Selecting a mode (Turning the unit on/off) Change the mode to recording, playback or power OFF. Turn on the power by changing the mode to lock release button A. HDC-SD20 HDC-TM20 or while pressing the HDC-HS20 OF F ≥ Operate the mode switch while at the same time pressing in the lock release button if changing from OFF to another mode.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 32 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Turning the power on and off with the LCD monitor When the mode is set to turned off when it is closed. , power is turned on when the LCD monitor is opened, and power is ∫ To turn on the power HDC-SD20 HDC-TM20 HDC-HS20 A The status indicator lights. ∫ To turn off the power HDC-SD20 HDC-TM20 HDC-HS20 A The status indicator goes off. Change the mode to OFF when this unit is not being used.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 33 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation Setup 4 How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. ∫ Touch ∫ About the operation icons Touch and release the touch screen to select icon or picture.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 34 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation Setup 5 Using the menu screen MENU 1 Press the MENU button. 4 Touch the desired item to enter the setting. 5 Touch [EXIT] or press the MENU button to exit the menu setting. MENU 2 3 Touch the top menu A. Touch the submenu B. ≥ Next (previous) page can be displayed by touching / . ≥ Information display setting is completed when is surrounded by yellow after touching it.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 35 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Language selection You can select the language on the screen display and the menu screen. 1 Press the MENU button, then touch [SETUP] # [LANGUAGE]. 2 Touch [English]. Menu list Part of the menu will not be used depending on the used functions. (l 135) Recording mode *1 It is not displayed when the Intelligent auto mode is on. *2 These menus are only for . *3 These menus are only for .
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 36 ページ PICTURE ２００８年１２月２２日 月曜日 午後８時１６分 SETUP [QUALITY] (l 55) [HI-SPEED BURST]*1 (l 70) [SELF TIMER] (l 71) [FLASH] (l 71) [FLASH LEVEL]*1 (l 71) [RED EYE]*1 (l 72) [SHTR SOUND] (l 72) MEDIA SELECT*2*3 Media to record can be set to [Built-in Memory] or [SD CARD]. Media to record can be set to [HDD] or [SD CARD]. [DISPLAY] The screen indications are selected as shown in the illustration below.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 37 ページ ２００８年１２月２２日 月曜日 午後８時１６分 [ALERT SOUND] [DEMO MODE] Touch screen operation, starting and stopping of recording and power on/off can be confirmed with this sound. 2 Beeps for 4 times When an error occurs. Check the sentence displayed on the screen. (l 133) This item is used to start the unit demonstration.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 38 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback mode *1 When the disc playback is selected while a DVD burner (optional) is connected, or when [INTEL. SCENE] (l 82) is selected, this does not appear. *2 Only when the disc playback is selected while a DVD burner (optional) is connected, this appears. *3 These menus are only for . *4 These menus are only for . *5 This appears only when the [VIDEO/SD CARD] or [PICTURE/SD CARD] is selected.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 39 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation Setup 6 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Change the mode to 1 . [DATE] [D/T] Select the menu. (l 34) NOV 15 2009 [SETUP] # [CLOCK SET] # [YES] 12:34PM NOV 15 2009 [OFF] 2 Touch the date or time to be set, then set the desired value using / .
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 40 ページ ２００８年１２月２２日 月曜日 午後８時１６分 World time setting (Displaying the time of the travel destination) It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. 1 Select the menu. (l 34) already been set once, execute the menu operation for Step 1. [SETUP] # [SET WORLD TIME] # [YES] ≥ If the clock is not set, adjust the clock to the current time.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 41 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation Setup 7 Adjusting LCD monitor ≥ These settings will not affect the images actually recorded. LCD monitor adjustment ∫ Power LCD This makes it easier to view the LCD monitor in bright places including outdoors. Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 42 ページ ２００８年１２月２２日 Touch screen calibration Perform the touch screen calibration if a different object to the one touched is selected. 1 Select the menu. (l 34) [SETUP] # [CALIBRATION] # [YES] ≥ Touch [ENTER]. 2 Touch the [_] with the supplied stylus pen and enter in calibration. ≥ Touch the [_] in the order it is displayed. (5 locations) 3 Touch [ENTER]. ≥ Calibration cannot be performed when the LCD monitor is turned 180o.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 43 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Preparation Using with the remote control 8 Setup Select the menu. (l 34) [SETUP] # [REMOTE CONTROL] # [ON] ≥ This function’s default setting is [ON]. ≥ [REMOTE CONTROL] can be set to [OFF] so the remote control will not be mistakenly used when not in use.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 44 ページ ２００８年１２月２２日 Replace battery with Panasonic PART NO. CR2025 only. Use of another battery may present a risk of fire or explosion. Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep away from children. Do not recharge, disassemble or dispose of in fire. 月曜日 午後８時１６分 Operation of direction buttons/OK button 1 Press a direction button.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 45 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Recording (Basic) 1 Before recording ∫ Basic camera positioning ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. 1 2 3 4 5 Hold the unit with both hands. Put your hand through the grip belt.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 46 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Intelligent auto mode The following modes appropriate for the condition are set just by pointing the unit to what you want to record. ≥ When this unit is purchased, the Intelligent auto mode is set to on. Intelligent auto button Press this button to switch on/off the Intelligent auto mode.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 47 ページ ２００８年１２月２２日 ∫ When Intelligent auto mode is set to off: When the Intelligent auto mode is set to off, the Auto white balance and Auto focus operate and automatically adjust the color balance and focusing. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. ≥ Color balance and focus may not be adjusted automatically depending on light sources or scenes.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 48 ページ ２００８年１２月２２日 Auto focus The lens is moved forward or backward automatically to bring the subject into focus. Auto focus has the following characteristics. jAdjusts so that the vertical lines of a subject are seen more clearly. jAttempts to bring an object with higher contrast into focus. Auto focus does not work correctly in the following situations. Record pictures in the manual focus mode.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 49 ページ 3 ２００８年１２月２２日 Open the LCD monitor. HDC-SD20 HDC-TM20 月曜日 午後８時１６分 Quick power on (Only when recording to an SD card or builtin memory) The unit is put into recording pause approx. 1.9 seconds when the mode is set to from OFF. ≥ Start time will not shorten if there is no SD card inserted. Start time will be shorten if the [Built-in Memory] is selected in the [MEDIA SELECT], even if there is no SD card inserted. HDC-HS20 ¬ Change the mode to .
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 50 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Recording (Basic) 2 Recording motion pictures This unit records high definition images that are compatible with the AVCHD format. Sound is recorded with the Dolby Digital 5.1 Creator. ≥ Use an SD card that can be used for motion picture recording. (l 29) ∫ When selecting media Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 51 ページ 4 ２００８年１２月２２日 Press the recording start/stop button to start recording. 5 月曜日 午後８時１６分 Press the recording start/stop button again to pause recording. ≥ While recording is in progress, the recording will not stop even if the LCD monitor is closed. About the compatibility of the recorded motion pictures ≥ They are not compatible with devices other than those that support AVCHD.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 52 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording modes/approximate recordable time Switch the picture quality of the motion pictures to be recorded. Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 53 ページ ２００８年１２月２２日 PRE-REC This prevents you from missing a shot. This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed. 1 Press the PRE-REC button. PRE-REC appears on the screen. ≥ Aim this unit at the subject and position it securely. 2 Press the recording start/stop button to start recording. ≥ There is no beep sound. ≥ After recording starts, the PRE-REC setting is canceled.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 54 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Recording (Basic) 3 Recording still pictures The number of pixels recorded for still pictures is [ 2.1 M 1920k1080] (16:9). Still pictures can also be recorded while recording motion pictures. HDC-SD20 HDC-TM20 HDC-HS20 OF F ≥ Operate the mode switch while at the same time pressing in the lock release button A if changing from OFF to another mode. 1 Change the mode to 2 Open the LCD monitor.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 55 ページ ２００８年１２月２２日 A Focus indication ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful. B Focus area (area inside brackets) Press the button fully. ≥ In order to take better still pictures, the screen will brighten when the button is fully pressed. ≥ The sound cannot be recorded while recording still pictures.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 56 ページ ２００８年１２月２２日 Simultaneous recording (recording still pictures while recording motion pictures) Picture size 2.1 M (1920t1080) Picture quality . While recording motion pictures, press the button fully (press to the bottom) to take the picture. ≥ While recording motion pictures or during the PRE-REC operation, the following arrangements are applied so that motion picture recording takes preference over still picture recording.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 57 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Recording (Basic) 4 Zoom in/out function The maximum optical zoom ratio is 16k. ¬ Change the mode to Digital zoom function . / VOL If the zoom magnification exceeds 16k, then the digital zoom function will be activated. W T Select the menu. (l 34) [RECORD SETUP] # [D.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 58 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Recording (Basic) 5 Optical image stabilizer function Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬ Change the mode to . O.I.S. Optical image stabilizer button Press this button to switch on/off the image stabilizer function. ≥ appears on the screen. O.I.S.: Optical Image Stabilizer ≥ This function’s default setting is on.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 59 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Recording (Basic) 6 AF tracking It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking) ¬ Change the mode to 1 Touch . A Target frame ≥ will be displayed on the screen.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 60 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Recording (Basic) 7 Recording with the video light The video light enables brightening of the images taken in a dimly-lit place. ¬ Change the mode to . LIGHT LIGHT button Each time the LIGHT button is pressed, the indication changes by one setting in the following order. # / # Setting canceled : Video light on / : Auto video light on/off ≥ This function’s default setting is / .
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 61 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Recording functions of operation icons 1 Recording (Advanced) Select the operation icons to add different effects to the images to be recorded. ¬ Change the mode to 1 . Touch F to display the operation icons on the screen. 2 (e.g. Backlight compensation) Select an operation icon. F F ≥ Touch 1 to change the page and touch F to display/not-display the operation F icon.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 62 ページ Function ２００８年１２月２２日 月曜日 午後８時１６分 Effect Backlight compensation This makes the image brighter to prevent darkening of a backlit subject. Intelligent contrast control This brightens parts that are in shadow and difficult to see and suppresses white saturation in bright parts at the same time. Both bright and dark parts can be recorded clearly. Fade (Fade in) (Fade out) When you start recording, the image/audio gradually appears.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 63 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Intelligent contrast control: ≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be clear. Fade: ≥ The thumbnails of scenes recorded using fade in become black (or white). Soft skin mode: ≥ If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 64 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Recording (Advanced) 2 Function Scene mode Recording functions of menus Effect/Setting method When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 65 ページ Function Guide line ２００８年１２月２２日 月曜日 午後８時１６分 Effect/Setting method You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition. ≥ Change the mode to . ≥ The Intelligent auto mode is set to off. (l 46) Select the menu. (l 34) [RECORD SETUP] # [GUIDE LINES] # desired setting When motion picture playback is selected while the mode is set to .
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 66 ページ Function Relay recording ２００８年１２月２２日 月曜日 午後８時１６分 Effect/Setting method It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. ≥ Change the mode to . Select the menu. (l 34) [RECORD SETUP] # [RELAY REC] # [ON] ≥ is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 67 ページ Function Automatic face framing [OFF]: Not display [PRIMARY]: Only the prioritized face framing is displayed. [ALL]: All face detection framings are displayed. Digital cinema color ２００８年１２月２２日 月曜日 午後８時１６分 Effect/Setting method In the Portrait mode of the Intelligent auto mode, detected faces appear with frames. ≥ Change the mode to . Select the menu. (l 34) [RECORD SETUP] # [FACE FRAMING] # desired setting ≥ This function’s default setting is [ALL].
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 68 ページ Function Wind noise reduction ２００８年１２月２２日 月曜日 午後８時１６分 Effect/Setting method This is for reducing the wind noise coming into the built-in microphones depending on the wind strength. ≥ Change the mode to . ≥ The Intelligent auto mode is set to off. (l 46) Select the menu. (l 34) [RECORD SETUP] # [WIND CUT] # [ON] Microphone setup [SURROUND]: Sound is recorded with 5.1 ch surround microphone.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 69 ページ ２００８年１２月２２日 Function Microphone level [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETr ]/[SET]: The desired recording level can be set. AGC: Auto Gain Control 月曜日 午後８時１６分 Effect/Setting method When recording, the input level from the built-in microphones can be adjusted. ≥ Change the mode to . ≥ The Intelligent auto mode is set to off. (l 46) 1 Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 70 ページ ２００８年１２月２２日 Function 月曜日 午後８時１６分 Effect/Setting method Hi-speed burst shooting Recording is done continuously at the rate of 24 or 60 still pictures per second. Use this function to record an object with fast movement. [24 frames/sec] 72 still pictures are recorded continuously at the rate of 24 per second. The picture size is 2.1 M (1920k1080). ≥ Change the mode to . ≥ The Intelligent auto mode is set to off.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 71 ページ Function Self-timer ２００８年１２月２２日 月曜日 午後８時１６分 Effect/Setting method This is for recording still pictures using the timer. ≥ Change the mode to . Select the menu. (l 34) [PICTURE] # [SELF TIMER] # [10 SECONDS] or [2 SECONDS] [10 SECONDS]: Records after 10 seconds [2 SECONDS]: Records after 2 seconds ≥ When the button is pressed, a still picture is recorded after the Ø10 or Ø2 display and the recording lamp flashes for the time which has been set.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 72 ページ ２００８年１２月２２日 Function Red eye reduction 月曜日 午後８時１６分 Effect/Setting method Reduces the phenomena where human eyes become red from flashes. ≥ Change the mode to . ≥ The Intelligent auto mode is set to off. (l 46) Select the menu. (l 34) [PICTURE] # [RED EYE] # [ON] Shutter sound You can add a shutter sound when recording still pictures. ≥ Change the mode to . Select the menu. (l 34) [PICTURE] # [SHTR SOUND] # [ON] ≥ This function’s default setting is [ON].
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 73 ページ ２００８年１２月２２日 Digital cinema color: ≥ When motion pictures recorded while this function is turned [ON] are played back with a TV not compatible with x.v.Color™, colors may not be reproduced properly. ≥ To play back images recorded in Digital cinema color with vivid colors of wider color ranges, a device compatible with x.v.Color™ is required. When these images are played back with devices other than ones compatible with x.v.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 74 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Recording Manual recording 3 Recording (Advanced) Touch the operation icon to adjust white balance, shutter speed, iris and manual focus. ¬ Change the mode to . Press the MANUAL button. ≥ MNL appears on the screen. MANUAL Perform the setting by touching the desired item to be set.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 75 ページ ２００８年１２月２２日 月曜日 午後８時１６分 White balance The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. The unit can record pictures in a natural hue if it can recognize the reference color white. ≥ Press the MANUAL button. (l 74) 1 Touch [WB]. ∫ To set the white balance manually 2 Touch / to select White Balance mode. 1 Select subject.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 76 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Press the MANUAL button. (l 74) 1 Touch [SHTR] or [IRIS]. 2 Touch / to adjust settings. 1/100 100 F WB SHTR IRIS MF SHTR Shutter speed: 1/60 to 1/8000 ≥ If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/30 and 1/8000.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 77 ページ ２００８年１２月２２日 Manual focus adjustment Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ Press the MANUAL button. (l 74) (When MF assist function is used) 1 Select the menu. (l 34) ≥ This function’s default setting is [ON]. 2 Touch [MF] icon. F WB SHTR IRIS Touch the desired setting items. MF ≥ In Manual Focus mode, [AF] icon appears on the screen. 3 Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 78 ページ ２００８年１２月２２日 月曜日 午後８時１６分 92 Playback Playback 1 Motion picture playback HDC-SD20 HDC-TM20 HDC-HS20 F OF ≥ Operate the mode switch while at the same time pressing in the lock release button if changing from OFF to another mode. A Lock release button 1 Change the mode to 2 Touch the play mode select icon C to select desired media to be played back.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 79 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ∫ Fast forward/rewind playback 4 Select the playback operation by touching the operation icon. Touch 5 during playback to fast forward. (Touch 6 to rewind.) 0h00m00s 1/;: 6: 5: ∫: 1: Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. Displays the direct playback bar. (l 80) ≥ Operation icon disappears if no playback operation is performed for about 3 seconds.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 80 ページ ２００８年１２月２２日 ∫ Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Pause the playback. ≥ When the operation icon disappears, touch the screen to display the icon again. 2 Touch . (Touch to advance the frames one at a time in the reverse direction.) ≥ Normal playback is restored when you touch . ≥ When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0.5 seconds.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 81 ページ ２００８年１２月２２日 Creating still picture from motion picture A single frame from the recorded motion picture can be saved as a still picture. 1 Pause at the scene you want to save as a still picture during playback. ≥ It is convenient to use slow-motion playback and frame-by-frame playback. 2 Press the 午後８時１６分 Highlight&Time frame index An image of one scene is displayed as a thumbnail at set time interval.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 82 ページ ２００８年１２月２２日 Playing back motion pictures by date Scenes recorded on the same day can be played back in succession. 1 Touch the date select icon. A Date select icon 2 Touch the playback date. NOV 15 2009 NOV 12 2009 NOV 10 2009 The scenes recorded on the date selected are displayed as thumbnails. 3 Touch the scene to be played back. ≥ Playing back of all the scenes returns if the power is turned off or the mode is changed.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 83 ページ ２００８年１２月２２日 Highlight playback Part that was recognized as clearly recorded is extracted from a long recording, and it can be played back in short time with music added. 1 Touch 月曜日 午後８時１６分 ∫ Scene setting 1) Touch [SELECT SCENES] or [SELECT DATE]. . 2) (When [SELECT SCENES] is selected) Touch the scene to be played back. 2 Touch [HIGHLIGHT]. 3 Touch the desired item. ≥ Up to 99 scenes can be selected in succession.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 84 ページ ２００８年１２月２２日 ∫ Playback time setting 1) Touch the playback time to set. 月曜日 午後８時１６分 Repeat playback Playback of the first scene starts after playback of the last scene finishes. Select the menu. (l 34) [VIDEO SETUP] # [REPEAT PLAY] # [ON] ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even play back if the part recognized as clearly recorded is short.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 85 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback Playback 2 Still picture playback HDC-SD20 HDC-TM20 HDC-HS20 F OF ≥ Operate the mode switch while at the same time pressing in the lock release button if changing from OFF to another mode. A Lock release button 1 Change the mode to 2 Touch the play mode select icon C to select desired media to be played back.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 86 ページ 4 ２００８年１２月２２日 Select the playback operation by touching the operation icon. 月曜日 午後８時１６分 ∫ Changing the playback settings for the slide show 1) Touch . 1/;: Slide show (playback of the still pictures in numerical order) start/pause. 2;: Plays back the previous picture. ;1: Plays back the next picture. ∫: Stops the playback and shows the thumbnails. ≥ Operation icon disappears if no playback operation is performed for about 3 seconds.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 87 ページ ２００８年１２月２２日 Still picture compatibility ≥ This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥ The file format of still pictures supported by this unit is JPEG. (Not all JPEG formatted files will be played back.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 88 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback 1 Editing Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to . To delete by confirming images being played back Press the button while scenes or still pictures to be deleted are being played back. ≥ When the confirmation message appears, touch [YES].
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 89 ページ ２００８年１２月２２日 月曜日 午後８時１６分 (Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-4. When you stop deleting halfway Touch [CANCEL] or press the MENU button while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is canceled cannot be restored. To complete editing Press the MENU button.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 90 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback Editing 2 Dividing a scene to partially delete To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. ¬Change the mode to 1 2 . Touch the play mode select icon to select the desired media to divide a scene. (l 78) 6 Select the menu. (l 34) To delete all the divided points [EDIT SCENE] # [DIVIDE] # [SET] 3 4 Touch the scene to be divided. Touch point.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 91 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback Editing 3 Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ¬ Change the mode to 1 . Select the menu. (l 34) [VIDEO SETUP] or [PICT. SETUP]# [SCENE PROTECT] # [YES] 2 Touch the scene/still picture to be protected.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 92 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback 4 Editing DPOF setting You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Change the mode to SD CARD].
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 93 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback Editing 5 Copying between SD card and Built-in Memory/HDD [HDC-TM20/HDC-HS20] Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in this unit and a built-in memory/HDD. Confirming remaining capacity on the copy destination ≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards following the instruction on the screen.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 94 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Copying ≥ If there is not much remaining capacity in the SD card, a confirmation message asking to copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored. 1 Change the mode to . ≥ Use a sufficiently charged battery or the AC adaptor. 2 4 (Only when [VIDEO]/[PICTURE] is selected in step 3) Touch the desired item. Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 95 ページ ２００８年１２月２２日 月曜日 午後８時１６分 (Only when [SELECT DATE] is selected in step 4) Touch the date to be copied. NOV 15 2009 NOV 12 2009 NOV 10 2009 NOV 08 2009 ≥ When touched, the date is selected and surrounded by red. Touch the date again to cancel the operation. ≥ Up to 99 dates can be set in succession. 6 (Only when [SELECT SCENES]/ [SELECT DATE] is selected in step 4) Touch [Enter]/[ENTER]. 7 When the confirmation message appears, touch [YES].
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 96 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback Relay scene combining 6 Editing [HDC-TM20] You can combine the relayed scene in the built-in memory and the continued scene in the SD card to be one into the SD card. Relay recording Relay scene combining A Built-in memory B SD card C Relay recorded scene ≥ Change the mode to . 1 Insert the SD card that was used for relay recording. 2 Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 97 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback Editing 7 Formatting Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 105, 117) ¬ Change the mode to 78) or , and select desired media to be formatted. (l 50, Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 98 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback With a TV 1 Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the supplied component cable and AV cable. Use of the following Panasonic HDMI mini cables is recommended to connect the unit to the HDMI terminal.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 99 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ≥ Check that the plugs are inserted as far as they go. ≥ Do not use any other cables except a genuine Panasonic HDMI mini cables (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other component cables except the supplied one. ≥ The component terminal is for outputting images only so be sure to also connect the AV cable. (It is not necessary to connect the yellow plug.) ≥ Do not use any other AV cables except the supplied one.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 100 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ∫ To watch images on a regular TV (4:3) ∫ To display the on-screen information on the TV When playing back motion pictures or still pictures recorded on this unit with a 16:9 aspect ratio on a TV with a 4:3 aspect ratio, the images on the screen may be squeezed horizontally. In this case, change the menu setting to play back the pictures in the original aspect ratio. (Check the TV setting.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 101 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Connecting with a HDMI mini cable What is HDMI? HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound. If you connect this unit to a Panasonic TV compatible with VIERA Link, linked operations (VIERA Link) are possible. (l 103) Select the desired method of HDMI output.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 102 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Listening in 5.1 channel sound You still can listen to the 5.1 channel sound recorded from the internal microphones when this unit is connected to the 5.1 channel compatible AV amplifier or TV using the HDMI mini cable. Please read the AV amplifier and TV operating instructions for how to connect this unit to the AV amplifier and TV.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 103 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playback With a TV 2 Playback using VIERA Link™ (HDAVI Control™) What is the VIERA Link? ≥ VIERA Link™ is a new name for EZ Sync™. ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 104 ページ 3 ２００８年１２月２２日 月曜日 午後８時１６分 Operate with the remote control for the TV. 1) 2) 1) Press the button up, down, left or right to select a scene or still picture to be played back, and then press the button in the center to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 105 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Backup With other products 1 Connecting a DVD burner to copy to/play back a disc Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner VW-BN1 (optional) to this unit using a Mini AB USB Connection Cable (supplied with VW-BN1). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 106 ページ 1 ２００８年１２月２２日 月曜日 午後８時１６分 Connect the AC adaptor (supplied with VW-BN1) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. 2 Connect this unit to the AC adaptor and change the mode to 3 Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with VW-BN1). A Mini AB USB Connection Cable (supplied with VW-BN1) B DVD burner (optional) ≥ Insert the plugs as far as they will go.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 107 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Copying to discs ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ Motion pictures and still pictures cannot both be copied to a single disc. ≥ Confirm that auto protection is [ON] before copying data.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 108 ページ 4 ２００８年１２月２２日 (Only when [Video&Picture]/[VIDEO] is 6 月曜日 午後８時１６分 (Only when [SELECT SCENES] is selected selected in step 3) in step 5) Touch the recording method for copying. Touch the scene you want to copy. [High Definition]: The images recorded in high definition picture quality with this unit are copied as they are. [Standard (XP)]/[Standard (SP)]: Images are converted into the original standard picture quality and then copied.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 109 ページ 7 (Only when [SELECT SCENES]/ ２００８年１２月２２日 8 月曜日 午後８時１６分 Touch [START]. [SELECT DATE] is selected in step 5) Touch [Enter]/[ENTER]. ≥ Touch [NEXT]. A The number of discs necessary for copying by disc type ≥ When 2 or more discs are necessary for copying, follow the on-screen instructions to switch discs. ≥ You may need more discs than displayed number of discs when you are copying additionally to a used DVD-RAM.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 110 ページ ２００８年１２月２２日 月曜日 午後８時１６分 About the approximate time it takes for copying to a disc To copy motion pictures to the full capacity of a disc Copy time Disc type [High Definition] DVD-RAM Approx. 50 min to 80 min DVD-RW* Approx. 35 min to 75 min DVD-R* Approx. 15 min to 45 min [Standard (XP)] [Standard (SP)] Approx. 90 min to 120 min Approx.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 111 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Playing back the copied disc ≥ Only discs that have been copied by connecting this unit to the DVD burner or created with HD Writer AE 1.0 can be played back. It may not be possible to play back discs copied/played back on other devices or software. A Mini AB USB Connection Cable (supplied with VW-BN1) 1 Connect this unit to the DVD burner to prepare for playback.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 112 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Managing the copied disc (Formatting, Auto protect, Displaying disc information) ≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 105) ∫ Formatting discs This is for initializing DVD-RAM and DVD-RW discs. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Back up important data on a PC etc. Select the menu.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 113 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Backup With other products 2 Dubbing images onto other video devices Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 114 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Backup With other products 3 With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) PictBridge is an industry standard from the Camera & Imaging Products Association (CIPA) for direct printing.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 115 ページ ２００８年１２月２２日 3 5 Select print source media and touch the icon. Select print source media and touch the icon. to set the number of Touch . 1 / ≥ If the [PictBridge] indication does not appear or continues to flash, disconnect and then reconnect the USB cable. Touch a still picture to be printed. / 午後８時１６分 ≥ Touch [ENTER] after the number of prints is set. ≥ You can set up to 9 prints. ≥ To cancel the setting, set the number of prints to [0].
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 116 ページ 8 ２００８年１２月２２日 Touch [PAPER SIZE] to select the paper size setting. [STANDARD]: Size specific to the printer [4k5 INCH]: L size [5k7 INCH]: 2L size [4k6 INCH]: Postcard size [A4]: A4 size ≥ You cannot set paper sizes not supported on the printer. 9 Touch [PAGE LAYOUT] to select the desired layout setting. [STANDARD]: Layout specific to the printer : No frame print : Frame print ≥ You cannot set page layouts not supported on the printer. ≥ Touch .
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 117 ページ ２００８年１２月２２日 月曜日 午後８時１６分 With a PC Before using 1 What you can do with a PC You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs (BD), DVD discs or SD cards using HD Writer AE 1.0 for HDC, the software installed in the supplied CD-ROM. Available function Data type Software required CD-ROM (supplied): HD Writer AE 1.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 118 ページ Available function ２００８年１２月２２日 月曜日 Data type Playing back on a PC Still picture Copying still pictures to a PC (l 127) 午後８時１６分 Software required HD Writer AE 1.0 or standard Windows picture viewer or a commercially available picture viewer Windows Explorer Refer to page 129 if using a Macintosh. *1 Refer to the operating instructions of HD Writer AE 1.0 (PDF file) for details on how to use it.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 119 ページ ２００８年１２月２２日 月曜日 午後８時１６分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 120 ページ ２００８年１２月２２日 月曜日 午後８時１６分 With a PC Before using 2 Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible BD/DVD writer drive and media are necessary for writing to a BD/DVD.) ≥ Operation is not guaranteed in the following cases.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 121 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Necessary software Windows Vista SP1: DirectX 10.1 (already installed with Windows Vista SP1) Windows Vista: DirectX 10 (already installed with Windows Vista) Windows XP/2000: DirectX 9.0c (already installed with Windows XP SP2) ≥ If you install the software on a PC that is not compatible with DirectX 9.0c, the PC may not work properly. If you are unsure whether or not your PC is compatible, contact the maker of your PC.
HDCSD20&SD25&HS20P-VQT1Y00_eng.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 123 ページ ２００８年１２月２２日 月曜日 午後８時１６分 With a PC Setup 1 Installation When installing the software, log on to your PC as the Administrator (or with a user name with equivalent authorization) or with the user name for a standard user account. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 124 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ∫ Uninstalling HD Writer AE 1.0 7 When installation is complete, some notes will appear Check the contents, then close the window. 8 Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program]. 2 Select [HD Writer AE 1.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 125 ページ ２００８年１２月２２日 月曜日 午後８時１６分 With a PC Setup 2 Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 Connect this unit to the AC adaptor. ≥ It is possible to use the unit connected to the PC with the batteries only, but you will not be able to write data into the unit. 2 Turn on the unit. ≥ This function is available in all modes.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 126 ページ ２００８年１２月２２日 ∫ If the driver has not been recognized properly Use the following methods to enable it to be recognized. Method 1: Turn off the unit and your PC once and try verifying again. Method 2: Remove the SD card and try verifying again. Method 3: Try connecting the unit to another USB port on your PC. ∫ To disconnect USB cable safely 1 2 Double click the ( ) icon in task tray displayed on the PC.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 127 ページ ２００８年１２月２２日 月曜日 午後８時１６分 About the PC display When the unit is connected to a PC, it is recognized as an external drive. ≥ Removable disk (Example: ) is displayed in [My Computer (Computer)]. We recommend using HD Writer AE 1.0 to copy or write back motion picture data. Using Windows Explorer or other programs on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable with HD Writer AE 1.0.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 128 ページ ２００８年１２月２２日 月曜日 午後８時１６分 With a PC Using with a PC 1 Starting HD Writer AE 1.0 ≥ When using HD Writer AE 1.0 on Windows XP/2000, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer AE 1.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 129 ページ ２００８年１２月２２日 月曜日 午後８時１６分 With a PC Using with a PC If using Macintosh 2 ≥ HD Writer AE 1.0 is not available for Macintosh. ≥ iMovie’08 7.1.2 or later supported. For details about iMovie’08, please contact Apple Inc. ∫ Operating environment for the card reader function (mass storage) PC Mac OS Mac OS X 10.4 Mac OS X 10.5 CPU PowerPC G5 (1.
HDCSD20&SD25&HS20P-VQT1Y00_eng.
HDCSD20&SD25&HS20P-VQT1Y00_eng.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 132 ページ ２００８年１２月２２日 ∫ PC connection indications Accessing the card (When connected to a PC) (l 125) Accessing the built-in memory (When connected to a PC) (l 125)*1 Accessing the HDD (When connected to a PC) (l 125)*2 ∫ Confirmatory indications –– (Time display) The built-in battery is low. (l 39) ° The warning/alarm indication appears when LCD monitor is rotated towards the lens side.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 133 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Others Indications 2 Messages Major confirmation/error messages to be indicated on the screen in text. RECOMMEND DATA BACK UP PERIODICALLY.*1, 2 We recommend backing up important recorded motion pictures and still pictures periodically to a PC, DVD disc etc. to protect it. This message does not indicate that there is a problem with this unit. HDD BACKUP RECOMMENDED.*2 There is a possible problem with the HDD.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 134 ページ ２００８年１２月２２日 月曜日 午後８時１６分 About recovery If faulty management information is found, one of the following messages may appear. Be sure to follow directions in the messages. (Repairing may take time depending on the error.) CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD) CONTROL DATA ERROR DETECTED IN THE BUILT-IN MEMORY.*1 CONTROL DATA ERROR HAS BEEN DETECTED. (HDD)*2 THUMBNAIL DATA ERROR IS DETECTED.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 135 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Others Helpful hints 1 Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications.
HDCSD20&SD25&HS20P-VQT1Y00_eng.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 137 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Others Helpful hints 2 Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. Troubleshooting Check points ≥ Charge the battery using the AC adaptor. (l 23) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ The battery is affected by ambient temperature.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 138 ページ Problem This unit cannot be operated though it is turned on. This unit does not operate normally. ２００８年１２月２２日 月曜日 午後８時１６分 Check points ≥ Turn on the power again. If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again. (Conducting the above operation while the media is being accessed may damage the data on the media.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 139 ページ Problem ２００８年１２月２２日 月曜日 午後８時１６分 Check points AF tracking does not work when the object is touched. ≥ Touch the part of the object that has specific color such as the part that is different from the surrounding. (l 59) Auto focus function does not work. ≥ Set the Intelligent auto mode to on or off. ≥ If you are trying to record a scene which is hard to bring into focus in Auto Focus mode, use the Manual Focus mode to adjust the focus.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 140 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Problem Check points If the SD card is inserted in another device, it is not recognized. ≥ Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card) that you inserted. Refer to the operating instructions of the device for details. Color or brightness of the image changes, or you may see horizontal bars in the image.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 141 ページ Problem VIERA Link does not work. ２００８年１２月２２日 月曜日 午後８時１６分 Check points [Setting on this unit] ≥ Connect with a HDMI mini cable (optional). (l 103) ≥ Press the MENU button, then touch [SETUP] # [VIERA Link] # [ON]. (l 103) ≥ Turn the power to the unit off and then back on again. [Setting on other devices] ≥ Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 142 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 143 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ∫ When deleting scenes 1 Scene to be deleted A The image will be still for several seconds wherever a scene was deleted. B The images of consecutive scenes where there are no deletions are played back smoothly one after another. ∫ When selected scenes are copied between an SD card and the built-in memory/HDD or when selected scenes are copied to a disc in a connected DVD burner.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 144 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 145 ページ ２００８年１２月２２日 / When disposing of or giving away this unit, note that: ≥ Formatting and deletion simply change the file management information and cannot be used to completely erase the data in built-in memory or HDD of this unit. The data can be recovered using commercially available software or the like. ≥ We recommend that you physically format the built-in memory or HDD before disposing of or giving away this unit.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 146 ページ ２００８年１２月２２日 If you drop the battery accidentally, check to see if the terminals are damaged. ≥ Attaching a battery with damaged terminals can damage the unit or AC adaptor. Do not throw an old battery into fire. ≥ Heating a battery or throwing it into a fire may result in an explosion. If the operating time is very short even after the battery has been recharged, the battery has worn out. Please purchase a new battery.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 147 ページ ２００８年１２月２２日 月曜日 午後８時１６分 About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥ When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 148 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 5.6 W 5.7 W 6.6 W HDC-SD20 HDC-TM20 HDC-HS20 Signal system 1080/60i Recording format AVCHD format compliant Image sensor 1/6z 1MOS image sensor Total: 1470 K Effective pixels: Motion picture: 1170 K Still picture: 1170 K Lens Auto Iris, F1.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 149 ページ ２００８年１２月２２日 HDC-SD20 月曜日 HDC-TM20 HDC-HS20 HDMI mini connector video output level HDMI™ AV terminal audio output level (Line) 316 mV, 600 h, 2 ch HDMI mini connector audio output level 5.1 ch (AC3)/2 ch (Linear PCM) USB Read/Write (No copyright protection support) SD card Built-in memory (x.v.Color™) – HDD 午後８時１６分 1125i (1080i)/525p (480p) Read only – – Read only Hi-Speed USB (USB 2.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 150 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Motion pictures HDC-SD20 Recording media SD card Built-in memory HDC-TM20 HDC-HS20 SD Memory Card: 1 GB, 2 GB (FAT12 and FAT16 system compliant) SDHC Memory Card: 4 GB, 6 GB, 8 GB, 12 GB, 16 GB, 32 GB (FAT32 system compliant) – HDD 16 GB – – 80 GB Compression MPEG-4 AVC/H.264 Recording mode and transfer rate HA: Approx. 17 Mbps (VBR) HG: Approx. 13 Mbps (VBR) HX: Approx. 9 Mbps (VBR) HE: Approx.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 151 ページ ２００８年１２月２２日 月曜日 午後８時１６分 AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 19 W DC 9.3 V, 1.2 A (Unit operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions 92 mm (W)k33 mm (H)k61 mm (D) [3.6 q (W)k1.3 q (H)k2.4 q (D)] Mass (Weight) Approx. 115 g (Approx. 0.25 lbs.) Specifications may change without prior notice.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 152 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Optional accessories Accessory No.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 153 ページ Accessory No.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 154 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Accessory Order Form (For USA and Puerto Rico Customers) Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 155 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Request for Service Notice (USA and Puerto Rico Only) Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
HDCSD20&SD25&HS20P-VQT1Y00_eng.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 157 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Customer Services Directory (United States and Puerto Rico) Service in Canada: As per Servicentre listed in Canadian warranty information on page 158. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 158 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Warranty (For Canadian Customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 159 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Index ∫ Numerics ∫G 5.1 channel . . . . . . . . . . . . . . . . . . . . . . . . .102 Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Grip belt . . . . . . . . . . . . . . . . . . . . . . . . . 19, 22 Guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 ∫A A/V terminal . . . . . . . . . . . . . . . . 17, 20, 98, 113 AC adaptor . . . . . . . . . . . . . . . . . . . .23, 28, 146 AF tracking . . . .
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 160 ページ ２００８年１２月２２日 ∫R Recordable time . . . . . . . . . . . . . . . . .25, 26, 52 Recording lamp . . . . . . . . . . . . . . . . . . . . . . .36 Recording modes . . . . . . . . . . . . . . . . . . . . . .52 Recording time elapsed . . . . . . . . . . . . . . . . .51 Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . .134 Red eye reduction . . . . . . . . . . . . . . . . . . . . .72 Relay recording . . . . . . . . . . . . . . . . . . . . . . .
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 161 ページ ２００８年１２月２２日 月曜日 午後８時１６分 Spanish Quick Use Guide/Guía española para el uso rápido ∫ Carga de la batería Luz indicadora de carga [CHARGE] A Encendida: Carga en curso Apagada: Carga completada 1 Conecte el cable de CA al adaptador de CA y a la toma de CA. 2 Instale la batería el adaptador de CA alineando las flechas. ∫ Inserción de la batería Meta la batería insertándola en la dirección señalada en la figura. 1) Abra la pantalla LCD.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 162 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ∫ Cómo usar la pantalla táctil ∫ Grabación de películas Puede actuar directamente tocando el monitor LCD (pantalla táctil) con su dedo. Es más sencillo utilizar el lápiz electrónico (suministrado) para operaciones detalladas o bien si es difícil de actuar con los dedos. 1) Cambie el modo a . 2) Abra la pantalla LCD. ≥ Para usuarios quienes tienen , proceda al Paso 4.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 163 ページ ２００８年１２月２２日 月曜日 午後８時１６分 ∫ Reproducción de películas ∫ Reproducción de fotografías 1) Cambie el modo a . 2) Toque el icono A de selección del modo de reproducción para seleccionar el medio deseado a ser reproducido. 1) Cambie el modo a . 2) Toque el icono A de selección del modo de reproducción para seleccionar el medio deseado a ser reproducido. ≥ Toque [VÍDEO/TARJETA SD] para reproducir la tarjeta SD.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 164 ページ ２００８年１２月２５日 木曜日 午後４時３分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Canada Inc.
