Quick Start Guide

22
VQT2A55 (ENG)
Preparation
Setup
3
Selecting a mode
(Turning the unit on/off)
Change the mode to recording, playback or power OFF.
Turn on the power by changing the mode to or while pressing the
lock release button A.
The status indicator lights.
To turn off the power
Change the mode to OFF.
The status indicator B goes off.
HDC-SD20
HDC-TM20
≥ Operate the mode switch while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Status indicator B
OFF
HDC-HS20
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Align with the status indicator B.
Recording mode (l 28, 30)
Playback mode (l 34, 37)
OFF
HDCSD20&TM20&HS20EP-VQT2A55_mst.book 22 ページ ２００８年１２月１６日 火曜日 午後９時２３分